| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20070731174522.b141178a.akpm@linux-foundation.org> Date: Tue, 31 Jul 2007 17:45:22 -0700 From: Andrew Morton <akpm@...ux-foundation.org> To: "Joachim Deguara" <joachim.deguara@....com> Cc: "lkml List" <linux-kernel@...r.kernel.org>, Michal Piotrowski <michal.k.k.piotrowski@...il.com>, Michael Chan <mchan@...adcom.com>, netdev@...r.kernel.org, linux-acpi@...r.kernel.org Subject: Re: [REGRESSION] tg3 dead after s2ram On Tue, 31 Jul 2007 11:28:32 +0200 "Joachim Deguara" <joachim.deguara@....com> wrote: > On my Acer Ferrari 1000 the tg3 ethernet no longer is available after a > suspend to ram with the latet 2.6.23-rc1-git9. Thanks. cc's added, body retained.. > The tg3 works fine with s2ram > in 2.6.22.1. The tell tail signs that is dead is this message from the > kernel log: > > [ 6.754133] tg3: eth0: No firmware running. > [ 6.816140] tg3: tg3_load_tso_firmware fails for eth0 to set CPU PC, is > ffffffff should be 00010000 > [ 7.285797] ACPI: EC: Handler for query 0x80 is not found! > [ 8.016223] tg3: tg3_abort_hw timed out for eth0, TX_MODE_ENABLE will not > clear MAC_TX_MODE=ffffffff > > and trying to bring the link up resuls in: > > # ifconfig eth0 up > SIOCSIFFLAGS: No such device > > Full kernel log follows. > > -Joachim > > [ 0.000000] Linux version 2.6.23-rc1-git9 (joachim@...nti) (gcc version > 4.2.1 20070705 (prerelease) (SUSE Linux)) #13 SMP PREEMPT Tue Jul 31 11:15:02 > CEST 2007 > [ 0.000000] Command line: > root=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2404SJHNT7YE-part6 > sysrq_always_enable resume=/dev/sda5 splash=silent showopts > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) > [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000007be80000 (usable) > [ 0.000000] BIOS-e820: 000000007be80000 - 000000007be95000 (ACPI data) > [ 0.000000] BIOS-e820: 000000007be95000 - 000000007bf00000 (ACPI NVS) > [ 0.000000] BIOS-e820: 000000007bf00000 - 0000000080000000 (reserved) > [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used > [ 0.000000] Entering add_active_range(0, 256, 507520) 1 entries of 3200 > used > [ 0.000000] end_pfn_map = 1048576 > [ 0.000000] DMI present. > [ 0.000000] ACPI: RSDP 000F81A0, 0014 (r0 PTLTD ) > [ 0.000000] ACPI: RSDT 7BE8D65C, 003C (r1 ACRSYS ACRPRDCT 6040000 LTP > 0) > [ 0.000000] ACPI: FACP 7BE94B9A, 0074 (r1 ATI Bowfin 6040000 ATI > F4240) > [ 0.000000] ACPI: DSDT 7BE8D698, 7502 (r1 ATI SB460 6040000 MSFT > 2000002) > [ 0.000000] ACPI: FACS 7BE95FC0, 0040 > [ 0.000000] ACPI: SSDT 7BE94C0E, 01C4 (r1 PTLTD POWERNOW 6040000 LTP > 1) > [ 0.000000] ACPI: APIC 7BE94DD2, 0054 (r1 PTLTD APIC 6040000 LTP > 0) > [ 0.000000] ACPI: MCFG 7BE94E26, 003C (r1 PTLTD MCFG 6040000 LTP > 0) > [ 0.000000] ACPI: BOOT 7BE94E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP > 1) > [ 0.000000] ACPI: SLIC 7BE94E8A, 0176 (r1 ACRSYS ACRPRDCT 6040000 acer > 0) > [ 0.000000] Scanning NUMA topology in Northbridge 24 > [ 0.000000] CPU has 2 num_cores > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-000000007be80000 > [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used > [ 0.000000] Entering add_active_range(0, 256, 507520) 1 entries of 3200 > used > [ 0.000000] Bootmem setup node 0 0000000000000000-000000007be80000 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0 -> 4096 > [ 0.000000] DMA32 4096 -> 1048576 > [ 0.000000] Normal 1048576 -> 1048576 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0 -> 157 > [ 0.000000] 0: 256 -> 507520 > [ 0.000000] On node 0 totalpages: 507421 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 1957 pages reserved > [ 0.000000] DMA zone: 1984 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 6882 pages used for memmap > [ 0.000000] DMA32 zone: 496542 pages, LIFO batch:31 > [ 0.000000] Normal zone: 0 pages used for memmap > [ 0.000000] Movable zone: 0 pages used for memmap > [ 0.000000] ATI board detected. Disabling timer routing over 8254. > [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] Processor #0 (Bootup-CPU) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] Processor #1 > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Setting APIC routing to flat > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - > 000000000009e000 > [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - > 00000000000a0000 > [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - > 00000000000d0000 > [ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - > 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 88000000 (gap: > 80000000:60000000) > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] PERCPU: Allocating 32384 bytes of per cpu data > [ 0.000000] Built 1 zonelists in Node order. Total pages: 498526 > [ 0.000000] Policy zone: DMA32 > [ 0.000000] Kernel command line: > root=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2404SJHNT7YE-part6 > sysrq_always_enable resume=/dev/sda5 splash=silent showopts > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) > [ 0.000000] Marking TSC unstable due to TSCs unsynchronized > [ 9.332064] time.c: Detected 1800.121 MHz processor. > [ 9.334073] Console: colour VGA+ 80x25 > [ 9.334077] console [tty0] enabled > [ 9.340370] Checking aperture... > [ 9.340460] CPU 0: aperture @ 109e000000 size 32 MB > [ 9.340550] Aperture too small (32 MB) > [ 9.352248] No AGP bridge found > [ 9.370894] Memory: 1990856k/2030080k available (4029k kernel code, 38828k > reserved, 2082k data, 316k init) > [ 9.371084] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, > Nodes=1 > [ 9.449887] Calibrating delay using timer specific routine.. 3603.97 > BogoMIPS (lpj=7207957) > [ 9.450344] Dentry cache hash table entries: 262144 (order: 9, 2097152 > bytes) > [ 9.451787] Inode-cache hash table entries: 131072 (order: 8, 1048576 > bytes) > [ 9.452539] Mount-cache hash table entries: 256 > [ 9.452780] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 9.452872] CPU: L2 Cache: 512K (64 bytes/line) > [ 9.452962] CPU 0/0 -> Node 0 > [ 9.453053] CPU: Physical Processor ID: 0 > [ 9.453142] CPU: Processor Core ID: 0 > [ 9.453274] SMP alternatives: switching to UP code > [ 9.455032] ACPI: Core revision 20070126 > [ 9.942195] Using local APIC timer interrupts. > [ 9.997761] result 12500848 > [ 9.997854] Detected 12.500 MHz APIC timer. > [ 10.001195] SMP alternatives: switching to SMP code > [ 10.002410] Booting processor 1/2 APIC 0x1 > [ 10.012640] Initializing CPU#1 > [ 10.093011] Calibrating delay using timer specific routine.. 3600.36 > BogoMIPS (lpj=7200723) > [ 10.093018] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 10.093020] CPU: L2 Cache: 512K (64 bytes/line) > [ 10.093023] CPU 1/1 -> Node 0 > [ 10.093025] CPU: Physical Processor ID: 0 > [ 10.093026] CPU: Processor Core ID: 1 > [ 10.093117] AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02 > [ 10.096955] Brought up 2 CPUs > [ 10.098213] NET: Registered protocol family 16 > [ 10.098601] ACPI: ACPI Dock Station Driver > [ 10.099074] ACPI: bus type pci registered > [ 10.099450] PCI: Using MMCONFIG at e0000000 - e08fffff > [ 10.099581] PCI: No mmconfig possible on device 00:18 > [ 10.104581] ACPI: System BIOS is requesting _OSI(Linux) > [ 10.104680] ACPI: If "acpi_osi=Linux" works better, > [ 10.104682] Please send dmidecode to linux-acpi@...r.kernel.org > [ 10.105170] ACPI: Interpreter enabled > [ 10.105263] ACPI: (supports S0 S3) > [ 10.105483] ACPI: Using IOAPIC for interrupt routing > [ 10.110906] ACPI: EC: GPE = 0x14, I/O: command/status = 0x66, data = > 0x62<6>ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 10.141469] PCI: Transparent bridge - 0000:00:14.4 > [ 10.141642] PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 > (-#09) (try 'pci=assign-busses') > [ 10.141785] Please report the result to <bk@...e.de> to fix this > permanently > [ 10.141910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 10.142100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] > [ 10.142239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] > [ 10.142372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] > [ 10.142518] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] > [ 10.142653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] > [ 10.146589] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. > [ 10.147046] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. > [ 10.147496] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. > [ 10.147947] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. > [ 10.148400] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. > [ 10.148851] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. > [ 10.149307] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. > [ 10.149758] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. > [ 10.150210] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled. > [ 10.150741] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 10.150861] pnp: PnP ACPI init > [ 10.150959] ACPI: bus type pnp registered > [ 10.153898] pnp: PnP ACPI: found 11 devices > [ 10.153994] ACPI: ACPI bus type pnp unregistered > [ 10.154319] SCSI subsystem initialized > [ 10.154471] libata version 2.21 loaded. > [ 10.154590] usbcore: registered new interface driver usbfs > [ 10.154720] usbcore: registered new interface driver hub > [ 10.154858] usbcore: registered new device driver usb > [ 10.155099] PCI: Using ACPI for IRQ routing > [ 10.155192] PCI: If a device doesn't work, try "pci=routeirq". If it > helps, post a report > [ 10.155336] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0 > [ 10.155428] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0 > [ 10.155522] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 > [ 10.155617] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 > [ 10.155712] PCI: Cannot allocate resource region 9 of bridge 0000:00:05.0 > [ 10.155806] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0 > [ 10.155901] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0 > [ 10.173290] Bluetooth: Core ver 2.11 > [ 10.173442] NET: Registered protocol family 31 > [ 10.173536] Bluetooth: HCI device and connection manager initialized > [ 10.173632] Bluetooth: HCI socket layer initialized > [ 10.185298] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be > reserved > [ 10.185442] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be > reserved > [ 10.185585] pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be > reserved > [ 10.185734] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved > [ 10.185828] pnp: 00:08: ioport range 0x220-0x22f has been reserved > [ 10.185925] pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved > [ 10.186020] pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be > reserved > [ 10.186161] pnp: 00:09: iomem range 0x0-0xfff could not be reserved > [ 10.186765] ACPI: PCI Interrupt 0000:08:09.1[B] -> GSI 21 (level, low) -> > IRQ 21 > [ 10.237089] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] > MMIO=[d0315000-d03157ff] Max Packet=[2048] IR/IT contexts=[4/8] > [ 10.237361] PCI: Bridge: 0000:00:01.0 > [ 10.237454] IO window: 9000-9fff > [ 10.237545] MEM window: d0100000-d01fffff > [ 10.237637] PREFETCH window: d4000000-d7ffffff > [ 10.237729] PCI: Bridge: 0000:00:04.0 > [ 10.239481] IO window: disabled. > [ 10.239572] MEM window: disabled. > [ 10.239665] PREFETCH window: disabled. > [ 10.239756] PCI: Bridge: 0000:00:05.0 > [ 10.239848] IO window: disabled. > [ 10.239939] MEM window: disabled. > [ 10.240031] PREFETCH window: disabled. > [ 10.240123] PCI: Bridge: 0000:00:06.0 > [ 10.240211] IO window: disabled. > [ 10.240300] MEM window: disabled. > [ 10.240392] PREFETCH window: disabled. > [ 10.240484] PCI: Bridge: 0000:00:07.0 > [ 10.240575] IO window: disabled. > [ 10.240667] MEM window: d0200000-d02fffff > [ 10.240759] PREFETCH window: d8000000-d80fffff > [ 10.240852] Time: acpi_pm clocksource has been installed. > [ 10.240950] PCI: Bus 9, cardbus bridge: 0000:08:09.0 > [ 10.241042] IO window: 00002000-000020ff > [ 10.241137] IO window: 00002400-000024ff > [ 10.241231] PREFETCH window: 88000000-8bffffff > [ 10.241323] MEM window: 90000000-93ffffff > [ 10.241419] PCI: Bridge: 0000:00:14.4 > [ 10.241513] IO window: 2000-2fff > [ 10.241609] MEM window: d0300000-d03fffff > [ 10.241703] PREFETCH window: 88000000-8bffffff > [ 10.241810] PCI: Setting latency timer of device 0000:00:04.0 to 64 > [ 10.241817] PCI: Setting latency timer of device 0000:00:05.0 to 64 > [ 10.241823] PCI: Setting latency timer of device 0000:00:06.0 to 64 > [ 10.241829] PCI: Enabling device 0000:00:07.0 (0000 -> 0002) > [ 10.241924] PCI: Setting latency timer of device 0000:00:07.0 to 64 > [ 10.241946] PCI: Enabling device 0000:08:09.0 (0000 -> 0003) > [ 10.242044] ACPI: PCI Interrupt 0000:08:09.0[A] -> GSI 20 (level, low) -> > IRQ 20 > [ 10.242307] NET: Registered protocol family 2 > [ 10.285199] IP route cache hash table entries: 65536 (order: 7, 524288 > bytes) > [ 10.286364] TCP established hash table entries: 262144 (order: 10, 6291456 > bytes) > [ 10.289863] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 10.290582] TCP: Hash tables configured (established 262144 bind 65536) > [ 10.290680] TCP reno registered > [ 10.305240] Unpacking initramfs... done > [ 10.417950] Freeing initrd memory: 3003k freed > [ 10.419932] Simple Boot Flag at 0x36 set to 0x1 > [ 10.424565] NTFS driver 2.1.28 [Flags: R/W]. > [ 10.424877] io scheduler noop registered > [ 10.425084] io scheduler cfq registered (default) > [ 10.425183] PCI: MSI quirk detected. MSI deactivated. > [ 10.425365] Boot video device is 0000:01:05.0 > [ 10.425520] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> > IRQ 17 > [ 10.425715] radeonfb (0000:01:05.0): cannot map FB > [ 10.425818] radeonfb: probe of 0000:01:05.0 failed with error -5 > [ 10.427811] ACPI: AC Adapter [ACAD] (on-line) > [ 10.428003] ACPI: Battery Slot [BAT1] (battery absent) > [ 10.428233] input: Power Button (FF) as /devices/virtual/input/input0 > [ 10.428328] ACPI: Power Button (FF) [PWRF] > [ 10.428516] input: Power Button (CM) as /devices/virtual/input/input1 > [ 10.428609] ACPI: Power Button (CM) [PWRB] > [ 10.428797] input: Lid Switch as /devices/virtual/input/input2 > [ 10.428890] ACPI: Lid Switch [LID] > [ 10.429061] input: Sleep Button (CM) as /devices/virtual/input/input3 > [ 10.429155] ACPI: Sleep Button (CM) [SLPB] > [ 10.435776] ACPI: Thermal Zone [THRM] (59 C) > [ 10.438426] Real Time Clock Driver v1.12ac > [ 10.438651] Non-volatile memory driver v1.2 > [ 10.438767] Linux agpgart interface v0.102 > [ 10.438859] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ > sharing disabled > [ 10.439686] loop: module loaded > [ 10.439837] ACPI: PCI Interrupt 0000:08:09.2[A] -> GSI 20 (level, low) -> > IRQ 20 > [ 10.440089] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 > [ 10.440187] Copyright (c) 1999-2006 Intel Corporation. > [ 10.440323] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI > [ 10.440416] e100: Copyright(c) 1999-2006 Intel Corporation > [ 10.440678] tg3.c:v3.79 (July 18, 2007) > [ 10.440794] ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 22 (level, low) -> > IRQ 22 > [ 10.460548] tifm_core: MMC/SD card detected in socket 0:1 > [ 10.482662] eth0: Tigon3 [partno(BCM95788) rev 3003 PHY(5705)] > (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:16:36:d0:6b:85 > [ 10.483042] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] > TSOcap[1] > [ 10.483185] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] > [ 10.483458] forcedeth.c: Reverse Engineered nForce ethernet driver. Version > 0.60. > [ 10.483639] tun: Universal TUN/TAP device driver, 1.6 > [ 10.483732] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com> > [ 10.483904] bcm43xx driver > [ 10.484034] netconsole: not configured, aborting > [ 10.484127] Linux video capture interface: v2.00 > [ 10.484653] sata_sil 0000:00:12.0: version 2.2 > [ 10.484702] PCI: Enabling device 0000:00:12.0 (0005 -> 0007) > [ 10.484798] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> > IRQ 22 > [ 10.485079] scsi0 : sata_sil > [ 10.485240] scsi1 : sata_sil > [ 10.485381] ata1: SATA max UDMA/100 cmd 0xffffc20000338080 ctl > 0xffffc2000033808a bmdma 0xffffc20000338000 irq 22 > [ 10.485526] ata2: SATA max UDMA/100 cmd 0xffffc200003380c0 ctl > 0xffffc200003380ca bmdma 0xffffc20000338008 irq 22 > [ 10.952123] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) > [ 10.960743] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100 > [ 10.960837] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used) > [ 10.976713] ata1.00: configured for UDMA/100 > [ 11.287593] ata2: SATA link down (SStatus 0 SControl 310) > [ 11.287777] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O > PQ: 0 ANSI: 5 > [ 11.288015] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 > MB) > [ 11.288119] sd 0:0:0:0: [sda] Write Protect is off > [ 11.288211] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 11.288229] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 11.288414] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 > MB) > [ 11.288517] sd 0:0:0:0: [sda] Write Protect is off > [ 11.288608] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 11.288624] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 11.288769] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > > [ 11.376058] sd 0:0:0:0: [sda] Attached SCSI disk > [ 11.376218] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 11.376469] PCI: Enabling device 0000:00:14.1 (0014 -> 0015) > [ 11.376566] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> > IRQ 16 > [ 11.376792] PCI: Setting latency timer of device 0000:00:14.1 to 64 > [ 11.376854] scsi2 : pata_atiixp > [ 11.377011] scsi3 : pata_atiixp > [ 11.377145] ata3: PATA max UDMA/100 cmd 0x00000000000101f0 ctl > 0x00000000000103f6 bmdma 0x0000000000018460 irq 14 > [ 11.377290] ata4: PATA max UDMA/100 cmd 0x0000000000010170 ctl > 0x0000000000010376 bmdma 0x0000000000018468 irq 15 > [ 11.377454] ata3: port disabled. ignoring. > [ 11.507405] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f0000dc3542] > [ 11.531280] Fusion MPT base driver 3.04.05 > [ 11.531373] Copyright (c) 1999-2007 LSI Logic Corporation > [ 11.531469] Fusion MPT SAS Host driver 3.04.05 > [ 11.531673] video1394: Installed video1394 module > [ 11.531799] ieee1394: raw1394: /dev/raw1394 device initialized > [ 11.531950] usbmon: debugfs is not available > [ 11.532091] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> > IRQ 19 > [ 11.532289] ehci_hcd 0000:00:13.2: EHCI Host Controller > [ 11.532439] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus > number 1 > [ 11.532635] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0007000 > [ 11.532740] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 > Dec 2004 > [ 11.533073] usb usb1: configuration #1 chosen from 1 choice > [ 11.533211] hub 1-0:1.0: USB hub found > [ 11.533310] hub 1-0:1.0: 8 ports detected > [ 11.635127] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) > Driver > [ 11.635169] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> > IRQ 19 > [ 11.635363] ohci_hcd 0000:00:13.0: OHCI Host Controller > [ 11.635493] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus > number 2 > [ 11.635647] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0005000 > [ 11.691108] usb usb2: configuration #1 chosen from 1 choice > [ 11.691241] hub 2-0:1.0: USB hub found > [ 11.691343] hub 2-0:1.0: 4 ports detected > [ 11.794883] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> > IRQ 19 > [ 11.795077] ohci_hcd 0000:00:13.1: OHCI Host Controller > [ 11.795206] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus > number 3 > [ 11.795359] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0006000 > [ 11.850887] usb usb3: configuration #1 chosen from 1 choice > [ 11.851018] hub 3-0:1.0: USB hub found > [ 11.851120] hub 3-0:1.0: 4 ports detected > [ 11.874713] usb 1-7: new high speed USB device using ehci_hcd and address 2 > [ 12.047389] usb 1-7: configuration #1 chosen from 1 choice > [ 12.589616] usb 3-4: new full speed USB device using ohci_hcd and address 2 > [ 12.802424] usb 3-4: configuration #1 chosen from 1 choice > [ 12.804820] usbcore: registered new interface driver usblp > [ 12.804914] Initializing USB Mass Storage driver... > [ 12.805058] usbcore: registered new interface driver usb-storage > [ 12.805151] USB Mass Storage support registered. > [ 12.805331] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 > irq 1,12 > [ 12.807490] i8042.c: Detected active multiplexing controller, rev 1.1. > [ 12.810494] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 12.810591] serio: i8042 AUX0 port at 0x60,0x64 irq 12 > [ 12.810687] serio: i8042 AUX1 port at 0x60,0x64 irq 12 > [ 12.810782] serio: i8042 AUX2 port at 0x60,0x64 irq 12 > [ 12.810875] serio: i8042 AUX3 port at 0x60,0x64 irq 12 > [ 12.811030] mice: PS/2 mouse device common for all mice > [ 12.843496] input: AT Translated Set 2 keyboard > as /devices/platform/i8042/serio0/input/input4 > [ 12.979654] md: raid0 personality registered for level 0 > [ 12.979755] md: raid1 personality registered for level 1 > [ 12.979850] Bluetooth: HCI USB driver ver 2.9 > [ 12.980065] usbcore: registered new interface driver hci_usb > [ 13.036963] usbcore: registered new interface driver usbhid > [ 13.037058] /home/joachim/kernel/2.6-git/drivers/hid/usbhid/hid-core.c: > v2.6:USB HID core driver > [ 13.037237] Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri > Jul 20 09:12:58 2007 UTC). > [ 13.037491] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> > IRQ 16 > [ 13.109129] ALSA device list: > [ 13.109242] #0: HDA ATI SB at 0xd0000000 irq 16 > [ 13.109404] oprofile: using NMI interrupt. > [ 13.109565] IPv4 over IPv4 tunneling driver > [ 13.109778] TCP cubic registered > [ 13.109886] Initializing XFRM netlink socket > [ 13.109994] NET: Registered protocol family 1 > [ 13.110088] NET: Registered protocol family 17 > [ 13.110182] NET: Registered protocol family 15 > [ 13.110282] Bluetooth: L2CAP ver 2.8 > [ 13.110374] Bluetooth: L2CAP socket layer initialized > [ 13.110479] Bluetooth: SCO (Voice Link) ver 0.5 > [ 13.110571] Bluetooth: SCO socket layer initialized > [ 13.110690] Bluetooth: RFCOMM socket layer initialized > [ 13.110781] Bluetooth: RFCOMM ver 1.8 > [ 13.110872] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > [ 13.111064] ieee80211: 802.11 data/management/control stack, git-1.1.13 > [ 13.111162] ieee80211: Copyright (C) 2004-2005 Intel Corporation > <jketreno@...ux.intel.com> > [ 13.111306] ieee80211_crypt: registered algorithm 'NULL' > [ 13.111308] ieee80211_crypt: registered algorithm 'WEP' > [ 13.111310] ieee80211_crypt: registered algorithm 'CCMP' > [ 13.111401] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology > TL-56 processors (2 cpu cores) (version 2.00.00) > [ 13.111517] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13 > [ 13.111613] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x15 > [ 13.111706] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1e > [ 13.112312] Freeing unused kernel memory: 316k freed > [ 13.376787] mmc0: new SD card at address b3df > [ 13.379000] mmcblk0: mmc0:b3df SD256 249088KiB > [ 13.379138] mmcblk0: p1 > [ 13.701868] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: > 0xa04713/0x0 > [ 13.748179] input: SynPS/2 Synaptics TouchPad > as /devices/platform/i8042/serio4/input/input5 > [ 13.803993] swsusp: Marking nosave pages: 000000000009d000 - > 0000000000100000 > [ 13.804000] swsusp: Basic memory bitmaps created > [ 13.831072] swsusp: Basic memory bitmaps freed > [ 13.848203] Attempting manual resume > [ 14.229088] kjournald starting. Commit interval 5 seconds > [ 14.229210] EXT3 FS on sda6, internal journal > [ 14.229345] EXT3-fs: mounted filesystem with ordered data mode. > [ 18.266036] Adding 3148700k swap on /dev/sda5. Priority:-1 extents:1 > across:3148700k > [ 18.390490] md: Autodetecting RAID arrays. > [ 18.390589] md: autorun ... > [ 18.390680] md: ... autorun DONE. > [ 19.440964] kjournald starting. Commit interval 5 seconds > [ 19.441097] EXT3 FS on sda7, internal journal > [ 19.441231] EXT3-fs: mounted filesystem with ordered data mode. > [ 19.502969] NTFS volume version 3.1. > [ 19.503070] NTFS-fs warning (device sda2): load_system_files(): Volume is > dirty. Will not be able to remount read-write. Run chkdsk and mount in > Windows. > [ 33.416925] tg3: eth0: Link is up at 1000 Mbps, full duplex. > [ 33.416931] tg3: eth0: Flow control is on for TX and on for RX. > [ 34.800494] ACPI: EC: Handler for query 0x81 is not found! > [ 40.588481] Stopping tasks ... done. > [ 40.589928] Suspending console(s) > [ 41.223742] sd 0:0:0:0: [sda] Synchronizing SCSI cache > [ 41.223976] sd 0:0:0:0: [sda] Stopping disk > [ 41.707281] mmc0: card b3df removed > [ 41.707446] MMC: killing requests for dead queue > [ 41.707638] ACPI handle has no context! > [ 41.707658] ACPI: PCI interrupt for device 0000:08:09.2 disabled > [ 41.707665] ACPI handle has no context! > [ 41.720957] ACPI handle has no context! > [ 41.737176] ACPI: PCI interrupt for device 0000:00:14.2 disabled > [ 41.752920] ACPI: PCI interrupt for device 0000:00:14.1 disabled > [ 41.753010] ACPI: PCI interrupt for device 0000:00:13.2 disabled > [ 41.768858] ACPI: PCI interrupt for device 0000:00:13.1 disabled > [ 41.768894] ACPI: PCI interrupt for device 0000:00:13.0 disabled > [ 41.768978] ACPI: PCI interrupt for device 0000:00:12.0 disabled > [ 41.785175] Disabling non-boot CPUs ... > [ 41.801866] Broke affinity for irq 1 > [ 41.801881] Broke affinity for irq 9 > [ 41.801917] Broke affinity for irq 22 > [ 41.904558] CPU 1 is now offline > [ 41.904561] SMP alternatives: switching to UP code > [ 41.906395] CPU1 is down > [ 0.360942] Back to C! > [ 0.361327] Enabling non-boot CPUs ... > [ 0.381083] SMP alternatives: switching to SMP code > [ 0.382068] Booting processor 1/2 APIC 0x1 > [ 0.392138] Initializing CPU#1 > [ 0.472858] Calibrating delay using timer specific routine.. 3600.39 > BogoMIPS (lpj=7200794) > [ 0.472865] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 0.472867] CPU: L2 Cache: 512K (64 bytes/line) > [ 0.472870] CPU 1/1 -> Node 0 > [ 0.472872] CPU: Physical Processor ID: 0 > [ 0.472873] CPU: Processor Core ID: 1 > [ 0.472956] AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02 > [ 0.477189] CPU1 is up > [ 0.479439] PM: Writing back config space on device 0000:00:00.0 at offset > 3 (was 0, writing 4000) > [ 0.479449] PM: Writing back config space on device 0000:00:01.0 at offset > 9 (was 10001, writing d7f1d401) > [ 0.479454] PM: Writing back config space on device 0000:00:01.0 at offset > 7 (was 22209191, writing 2209191) > [ 0.479470] PM: Writing back config space on device 0000:00:04.0 at offset > 9 (was 10001, writing 1fff1) > [ 0.479473] PM: Writing back config space on device 0000:00:04.0 at offset > 8 (was 0, writing fff0) > [ 0.479477] PM: Writing back config space on device 0000:00:04.0 at offset > 7 (was 101, writing 1f1) > [ 0.479480] PM: Writing back config space on device 0000:00:04.0 at offset > 6 (was 0, writing 20200) > [ 0.479485] PM: Writing back config space on device 0000:00:04.0 at offset > 1 (was 100000, writing 100004) > [ 0.479498] PCI: Setting latency timer of device 0000:00:04.0 to 64 > [ 0.479505] PM: Writing back config space on device 0000:00:05.0 at offset > 9 (was 10001, writing 1fff1) > [ 0.479509] PM: Writing back config space on device 0000:00:05.0 at offset > 8 (was 0, writing fff0) > [ 0.479512] PM: Writing back config space on device 0000:00:05.0 at offset > 7 (was 101, writing 1f1) > [ 0.479517] PM: Writing back config space on device 0000:00:05.0 at offset > 1 (was 100000, writing 100004) > [ 0.479528] PCI: Setting latency timer of device 0000:00:05.0 to 64 > [ 0.479535] PM: Writing back config space on device 0000:00:06.0 at offset > 9 (was 10001, writing 1fff1) > [ 0.479539] PM: Writing back config space on device 0000:00:06.0 at offset > 8 (was 0, writing fff0) > [ 0.479542] PM: Writing back config space on device 0000:00:06.0 at offset > 7 (was 101, writing 1f1) > [ 0.479546] PM: Writing back config space on device 0000:00:06.0 at offset > 6 (was 0, writing 60600) > [ 0.479550] PM: Writing back config space on device 0000:00:06.0 at offset > 1 (was 100000, writing 100004) > [ 0.479561] PCI: Setting latency timer of device 0000:00:06.0 to 64 > [ 0.479569] PM: Writing back config space on device 0000:00:07.0 at offset > 9 (was 10001, writing d801d801) > [ 0.479572] PM: Writing back config space on device 0000:00:07.0 at offset > 8 (was 0, writing d020d020) > [ 0.479576] PM: Writing back config space on device 0000:00:07.0 at offset > 7 (was 101, writing 200001f1) > [ 0.479579] PM: Writing back config space on device 0000:00:07.0 at offset > 6 (was 0, writing 70700) > [ 0.479584] PM: Writing back config space on device 0000:00:07.0 at offset > 1 (was 100000, writing 100006) > [ 0.479595] PCI: Setting latency timer of device 0000:00:07.0 to 64 > [ 0.496881] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> > IRQ 22 > [ 0.496902] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> > IRQ 19 > [ 0.496946] PM: Writing back config space on device 0000:00:13.0 at offset > 3 (was 804008, writing 804010) > [ 0.496961] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> > IRQ 19 > [ 0.512807] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> > IRQ 19 > [ 0.512927] PM: Writing back config space on device 0000:00:14.1 at offset > f (was 100, writing 10b) > [ 0.512942] PM: Writing back config space on device 0000:00:14.1 at offset > 8 (was 1, writing 8461) > [ 0.512948] PM: Writing back config space on device 0000:00:14.1 at offset > 7 (was 1, writing 8471) > [ 0.512953] PM: Writing back config space on device 0000:00:14.1 at offset > 6 (was 1, writing 8479) > [ 0.512959] PM: Writing back config space on device 0000:00:14.1 at offset > 5 (was 1, writing 8475) > [ 0.512965] PM: Writing back config space on device 0000:00:14.1 at offset > 4 (was 1, writing 8481) > [ 0.512971] PM: Writing back config space on device 0000:00:14.1 at offset > 3 (was 0, writing 4000) > [ 0.512976] PM: Writing back config space on device 0000:00:14.1 at offset > 2 (was 1018280, writing 1018080) > [ 0.512982] PM: Writing back config space on device 0000:00:14.1 at offset > 1 (was 2300000, writing 2300015) > [ 0.513002] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> > IRQ 16 > [ 0.528794] PM: Writing back config space on device 0000:00:14.2 at offset > f (was 100, writing b) > [ 0.528816] PM: Writing back config space on device 0000:00:14.2 at offset > 4 (was 4, writing d0000004) > [ 0.528822] PM: Writing back config space on device 0000:00:14.2 at offset > 3 (was 0, writing 4008) > [ 0.528829] PM: Writing back config space on device 0000:00:14.2 at offset > 1 (was 4100000, writing 4100002) > [ 0.528850] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> > IRQ 16 > [ 0.585029] PM: Writing back config space on device 0000:00:14.4 at offset > 9 (was 0, writing 8bf08800) > [ 0.585035] PM: Writing back config space on device 0000:00:14.4 at offset > 8 (was 0, writing d030d030) > [ 0.585041] PM: Writing back config space on device 0000:00:14.4 at offset > 7 (was 22801111, writing 22802121) > [ 0.585052] PM: Writing back config space on device 0000:00:14.4 at offset > 3 (was 810000, writing 814000) > [ 0.585059] PM: Writing back config space on device 0000:00:14.4 at offset > 1 (was 2a00021, writing 2a00007) > [ 0.585114] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> > IRQ 17 > [ 0.585132] PM: Writing back config space on device 0000:07:00.0 at offset > f (was 100, writing 10b) > [ 0.585151] PM: Writing back config space on device 0000:07:00.0 at offset > 6 (was c, writing d800000c) > [ 0.585157] PM: Writing back config space on device 0000:07:00.0 at offset > 4 (was 4, writing d0200004) > [ 0.585194] PM: Writing back config space on device 0000:08:09.0 at offset > f (was c001ff, writing 1c0010b) > [ 0.585200] PM: Writing back config space on device 0000:08:09.0 at offset > e (was 0, writing 24fc) > [ 0.585207] PM: Writing back config space on device 0000:08:09.0 at offset > d (was 0, writing 2400) > [ 0.585215] PM: Writing back config space on device 0000:08:09.0 at offset > c (was 0, writing 20fc) > [ 0.585221] PM: Writing back config space on device 0000:08:09.0 at offset > b (was 0, writing 2000) > [ 0.585227] PM: Writing back config space on device 0000:08:09.0 at offset > a (was 0, writing 93fff000) > [ 0.585236] PM: Writing back config space on device 0000:08:09.0 at offset > 9 (was 0, writing 90000000) > [ 0.585242] PM: Writing back config space on device 0000:08:09.0 at offset > 8 (was 0, writing 8bfff000) > [ 0.585249] PM: Writing back config space on device 0000:08:09.0 at offset > 7 (was 0, writing 88000000) > [ 0.585257] PM: Writing back config space on device 0000:08:09.0 at offset > 6 (was 0, writing b00c0908) > [ 0.585265] PM: Writing back config space on device 0000:08:09.0 at offset > 4 (was 0, writing d0314000) > [ 0.585273] PM: Writing back config space on device 0000:08:09.0 at offset > 3 (was 820000, writing 824008) > [ 0.585281] PM: Writing back config space on device 0000:08:09.0 at offset > 1 (was 2100000, writing 2100007) > [ 0.585313] ACPI: PCI Interrupt 0000:08:09.0[A] -> GSI 20 (level, low) -> > IRQ 20 > [ 0.600687] PM: Writing back config space on device 0000:08:09.1 at offset > f (was 4030200, writing 403020b) > [ 0.600711] PM: Writing back config space on device 0000:08:09.1 at offset > 5 (was 0, writing d0310000) > [ 0.600718] PM: Writing back config space on device 0000:08:09.1 at offset > 4 (was 0, writing d0315000) > [ 0.600725] PM: Writing back config space on device 0000:08:09.1 at offset > 3 (was 800000, writing 804008) > [ 0.600735] PM: Writing back config space on device 0000:08:09.1 at offset > 1 (was 2100000, writing 2100016) > [ 0.650712] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] > MMIO=[d0315000-d03157ff] Max Packet=[2048] IR/IT contexts=[4/8] > [ 0.664592] PM: Writing back config space on device 0000:08:09.2 at offset > f (was 40701ff, writing 407010b) > [ 0.664618] PM: Writing back config space on device 0000:08:09.2 at offset > 4 (was 0, writing d0316000) > [ 0.664625] PM: Writing back config space on device 0000:08:09.2 at offset > 3 (was 800000, writing 804008) > [ 0.664633] PM: Writing back config space on device 0000:08:09.2 at offset > 1 (was 2100000, writing 2100006) > [ 0.664656] ACPI: PCI Interrupt 0000:08:09.2[A] -> GSI 20 (level, low) -> > IRQ 20 > [ 0.733792] ACPI: EC: Handler for query 0x80 is not found! > [ 0.752456] sd 0:0:0:0: [sda] Starting disk > [ 0.820363] ata2: SATA link down (SStatus 0 SControl 310) > [ 1.087869] mmc0: new SD card at address b3df > [ 1.087973] mmcblk0: mmc0:b3df SD256 249088KiB > [ 1.088001] mmcblk0: p1 > [ 1.739362] ACPI: EC: Handler for query 0x80 is not found! > [ 3.716115] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) > [ 3.744731] ata1.00: configured for UDMA/100 > [ 3.761238] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 > MB) > [ 3.761253] sd 0:0:0:0: [sda] Write Protect is off > [ 3.761256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.761275] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 4.701254] Restarting tasks ... <6>usb 1-7: USB disconnect, address 2 > [ 4.707688] done. > [ 4.812091] usb 1-7: new high speed USB device using ehci_hcd and address 4 > [ 4.865420] ACPI: EC: Handler for query 0x80 is not found! > [ 4.985101] usb 1-7: configuration #1 chosen from 1 choice > [ 6.302539] ACPI: EC: Handler for query 0x80 is not found! > [ 6.754133] tg3: eth0: No firmware running. > [ 6.816140] tg3: tg3_load_tso_firmware fails for eth0 to set CPU PC, is > ffffffff should be 00010000 > [ 7.285797] ACPI: EC: Handler for query 0x80 is not found! > [ 8.016223] tg3: tg3_abort_hw timed out for eth0, TX_MODE_ENABLE will not > clear MAC_TX_MODE=ffffffff > [ 8.291669] ACPI: EC: Handler for query 0x80 is not found! > [ 9.296809] ACPI: EC: Handler for query 0x80 is not found! > [ 9.940778] usb 3-4: USB disconnect, address 2 > [ 10.282030] ACPI: EC: Handler for query 0x81 is not found! > [ 10.367084] usb 3-4: new full speed USB device using ohci_hcd and address 3 > [ 10.462150] usb 3-4: configuration #1 chosen from 1 choice > [ 10.727884] ACPI: EC: Handler for query 0x81 is not found! > [ 11.173888] ACPI: EC: Handler for query 0x81 is not found! > [ 12.512423] ACPI: EC: Handler for query 0x81 is not found! > > > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@...r.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists