[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <200708061043.20592.mb@bu3sch.de>
Date: Mon, 6 Aug 2007 10:43:20 +0200
From: Michael Buesch <mb@...sch.de>
To: Aurelien Jarno <aurelien@...el32.net>
Cc: netdev@...r.kernel.org, Felix Fietkau <nbd@...nwrt.org>
Subject: Re: [PATCH 2/4][SSB] EXTIF serial port initialization
On Monday 06 August 2007, Aurelien Jarno wrote:
> The patch below against 2.6.23-rc1-mm2 implements EXTIF serial
> initialization, currently marked as TODO.
>
> It originally comes from the OpenWrt patches.
>
> Cc: Felix Fietkau <nbd@...nwrt.org>
> Signed-off-by: Aurelien Jarno <aurelien@...el32.net>
>
> --- a/drivers/ssb/driver_mipscore.c
> +++ b/drivers/ssb/driver_mipscore.c
Also to driver_extif.c, please.
> @@ -128,51 +128,52 @@
> ssb_write32(mdev, SSB_IPSFLAG, irqflag);
> }
>
> -/* XXX: leave here or move into separate extif driver? */
> -static int ssb_extif_serial_init(struct ssb_device *dev, struct ssb_serial_ports *ports)
> +static inline bool serial_exists(u8 *regs)
> {
> + u8 save_mcr, msr = 0;
>
> + if (regs) {
> + save_mcr = regs[UART_MCR];
> + regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS);
> + msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI \
> + | UART_MSR_CTS | UART_MSR_DSR);
> + regs[UART_MCR] = save_mcr;
> + }
> + return (msr == (UART_MSR_DCD | UART_MSR_CTS));
> }
>
> -
> -static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
> +static int ssb_extif_serial_init(struct ssb_extif *dev, struct ssb_serial_port *ports)
> {
> - struct ssb_bus *bus = mcore->dev->bus;
> + u32 i, nr_ports = 0;
>
> - //TODO if (EXTIF available
> -#if 0
> - extifregs_t *eir = (extifregs_t *) regs;
> - sbconfig_t *sb;
> -
> - /* Determine external UART register base */
> - sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
> - base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1)));
> -
> - /* Determine IRQ */
> - irq = sb_irq(sbh);
> -
> - /* Disable GPIO interrupt initially */
> - W_REG(&eir->gpiointpolarity, 0);
> - W_REG(&eir->gpiointmask, 0);
> -
> - /* Search for external UARTs */
> - n = 2;
> - for (i = 0; i < 2; i++) {
> - regs = (void *) REG_MAP(base + (i * 8), 8);
> - if (BCMINIT(serial_exists)(regs)) {
> - /* Set GPIO 1 to be the external UART IRQ */
> - W_REG(&eir->gpiointmask, 2);
> - if (add)
> - add(regs, irq, 13500000, 0);
> - }
> + /* Disable GPIO interrupt initially */
> + extif_write32(dev, SSB_EXTIF_GPIO_INTPOL, 0);
> + extif_write32(dev, SSB_EXTIF_GPIO_INTMASK, 0);
> +
> + for (i = 0; i < 2; i++) {
> + void __iomem *uart_regs;
> +
> + uart_regs = ioremap_nocache(SSB_EUART, 16);
> + uart_regs += (i * 8);
> +
> + if (serial_exists(uart_regs) && ports) {
> + extif_write32(dev, SSB_EXTIF_GPIO_INTMASK, 2);
> +
> + nr_ports++;
> + ports[i].regs = uart_regs;
> + ports[i].irq = 2;
> + ports[i].baud_base = 13500000;
> + ports[i].reg_shift = 0;
> }
> + iounmap(uart_regs);
> + }
> + return nr_ports;
> +}
>
> - /* Add internal UART if enabled */
> - if (R_REG(&eir->corecontrol) & CC_UE)
> - if (add)
> - add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
> +static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
> +{
> + struct ssb_bus *bus = mcore->dev->bus;
>
> -#endif
> if (bus->extif.dev)
> mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports);
> else if (bus->chipco.dev)
>
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists