netdev - Re: e1000 doesn't resume properly from standby (2.6.23-rc2)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <1977.simon.1186400234@5ec7c279.invalid>
Date:	Mon, 6 Aug 2007 12:37:14 +0100
From:	"Simon Arlott" <simon@...e.lp0.eu>
To:	"Pavel Machek" <pavel@....cz>
Cc:	"Kok, Auke" <auke-jan.h.kok@...el.com>,
	linux-pm@...ts.linux-foundation.org,
	"Linux Kernel Mailing List" <linux-kernel@...r.kernel.org>,
	netdev@...r.kernel.org
Subject: Re: e1000 doesn't resume properly from standby (2.6.23-rc2)

On Mon, August 6, 2007 11:44, Pavel Machek wrote:
> Hi!
>
>> >00:0a.0 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet
>> >Controller (Copper) (rev 01)
>> >        Subsystem: Intel Corp.: Unknown device 1012
>> >        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5
>> >        Memory at e3020000 (64-bit, non-prefetchable) [size=128K]
>> >        I/O ports at b000 [size=64]
>> >        Capabilities: [dc] Power Management version 2
>> >        Capabilities: [e4] PCI-X non-bridge device.
>> >        Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0
>> >        Enable-
>> >
>> >00:0a.1 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet
>> >Controller (Copper) (rev 01)
>> >        Subsystem: Intel Corp.: Unknown device 1012
>> >        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 12
>> >        Memory at e3000000 (64-bit, non-prefetchable) [size=128K]
>> >        I/O ports at b400 [size=64]
>> >        Capabilities: [dc] Power Management version 2
>> >        Capabilities: [e4] PCI-X non-bridge device.
>> >        Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0
>> >        Enable-
>> >
>> >[  950.132046] Stopping tasks ... done.
>> >[  950.459794] Suspending console(s)
>> >[  951.776277] pnp: Device 00:0c disabled.
>> >[  951.776673] pnp: Device 00:0a disabled.
>> >[  951.776984] pnp: Device 00:09 disabled.
>> >[  951.777306] pnp: Device 00:08 disabled.
>> >[  951.777786] ACPI: PCI interrupt for device 0000:00:11.5 disabled
>> >[  951.995359] ACPI: PCI interrupt for device 0000:00:11.3 disabled
>> >[  952.006094] ACPI: PCI interrupt for device 0000:00:11.2 disabled
>> >[  952.022243] ACPI handle has no context!
>> >[  952.033068] ACPI: PCI interrupt for device 0000:00:0c.2 disabled
>> >[  952.044086] ACPI: PCI interrupt for device 0000:00:0c.1 disabled
>> >[  952.055083] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
>> >[  952.282211] ACPI: PCI interrupt for device 0000:00:0a.1 disabled
>> >[  952.282221] ACPI handle has no context!
>> >[  952.537474] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
>> >[  952.537495] ACPI handle has no context!
>> >
>> >[  956.857085] Back to C!
>
> Are you sure that is standby? Looks like suspend-to-RAM to me.

It's S1 (power-on suspend/standby), my BIOS/motherboard doesn't support S2 or S3.

-- 
Simon Arlott
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html