| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070810200047.21509.46779.stgit@localhost.localdomain>
Date: Fri, 10 Aug 2007 13:00:47 -0700
From: Auke Kok <auke-jan.h.kok@...el.com>
To: jeff@...zik.org
Cc: netdev@...r.kernel.org, akpm@...ux-foundation.org,
andi@...stfloor.org
Subject: [PATCH 2/6] e1000e: remove namespace collisions with e1000
To prevent future collisions we rename all extern's from e1000_
to e1000e_*. The list of changed symbols was taken from e1000.h
Compile tested with CONFIG_E1000=y and CONFIG_E1000E=y.
Signed-off-by: Auke Kok <auke-jan.h.kok@...el.com>
---
drivers/net/e1000e/82571.c | 129 +++++++++++++-------------
drivers/net/e1000e/e1000.h | 194 +++++++++++++++++++--------------------
drivers/net/e1000e/es2lan.c | 118 ++++++++++++------------
drivers/net/e1000e/ethtool.c | 62 ++++++------
drivers/net/e1000e/ich8lan.c | 92 +++++++++---------
drivers/net/e1000e/lib.c | 210 +++++++++++++++++++++---------------------
drivers/net/e1000e/netdev.c | 168 +++++++++++++++++-----------------
drivers/net/e1000e/param.c | 8 +-
drivers/net/e1000e/phy.c | 138 ++++++++++++++--------------
9 files changed, 559 insertions(+), 560 deletions(-)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 0f8f0ac..cf70522 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -54,7 +54,6 @@
static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
-static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
u16 words, u16 *data);
static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
@@ -214,18 +213,18 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
switch (hw->media_type) {
case e1000_media_type_copper:
func->setup_physical_interface = e1000_setup_copper_link_82571;
- func->check_for_link = e1000_check_for_copper_link;
- func->get_link_up_info = e1000_get_speed_and_duplex_copper;
+ func->check_for_link = e1000e_check_for_copper_link;
+ func->get_link_up_info = e1000e_get_speed_and_duplex_copper;
break;
case e1000_media_type_fiber:
func->setup_physical_interface = e1000_setup_fiber_serdes_link_82571;
- func->check_for_link = e1000_check_for_fiber_link;
- func->get_link_up_info = e1000_get_speed_and_duplex_fiber_serdes;
+ func->check_for_link = e1000e_check_for_fiber_link;
+ func->get_link_up_info = e1000e_get_speed_and_duplex_fiber_serdes;
break;
case e1000_media_type_internal_serdes:
func->setup_physical_interface = e1000_setup_fiber_serdes_link_82571;
- func->check_for_link = e1000_check_for_serdes_link;
- func->get_link_up_info = e1000_get_speed_and_duplex_fiber_serdes;
+ func->check_for_link = e1000e_check_for_serdes_link;
+ func->get_link_up_info = e1000e_get_speed_and_duplex_fiber_serdes;
break;
default:
return -E1000_ERR_CONFIG;
@@ -324,7 +323,7 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
phy->id = IGP01E1000_I_PHY_ID;
break;
case e1000_82573:
- return e1000_get_phy_id(hw);
+ return e1000e_get_phy_id(hw);
break;
default:
return -E1000_ERR_PHY;
@@ -360,7 +359,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
if (i == timeout) {
/* Release semaphores */
- e1000_put_hw_semaphore(hw);
+ e1000e_put_hw_semaphore(hw);
hw_dbg(hw, "Driver can't access the NVM\n");
return -E1000_ERR_NVM;
}
@@ -403,7 +402,7 @@ static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
return ret_val;
if (hw->mac.type != e1000_82573)
- ret_val = e1000_acquire_nvm(hw);
+ ret_val = e1000e_acquire_nvm(hw);
if (ret_val)
e1000_put_hw_semaphore_82571(hw);
@@ -419,7 +418,7 @@ static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
**/
static void e1000_release_nvm_82571(struct e1000_hw *hw)
{
- e1000_release_nvm(hw);
+ e1000e_release_nvm(hw);
e1000_put_hw_semaphore_82571(hw);
}
@@ -432,7 +431,7 @@ static void e1000_release_nvm_82571(struct e1000_hw *hw)
*
* For non-82573 silicon, write data to EEPROM at offset using SPI interface.
*
- * If e1000_update_nvm_checksum is not called after this function, the
+ * If e1000e_update_nvm_checksum is not called after this function, the
* EEPROM will most likley contain an invalid checksum.
**/
static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words,
@@ -446,7 +445,7 @@ static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words,
break;
case e1000_82571:
case e1000_82572:
- ret_val = e1000_write_nvm_spi(hw, offset, words, data);
+ ret_val = e1000e_write_nvm_spi(hw, offset, words, data);
break;
default:
ret_val = -E1000_ERR_NVM;
@@ -470,7 +469,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
s32 ret_val;
u16 i;
- ret_val = e1000_update_nvm_checksum_generic(hw);
+ ret_val = e1000e_update_nvm_checksum_generic(hw);
if (ret_val)
return ret_val;
@@ -527,7 +526,7 @@ static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw)
if (hw->nvm.type == e1000_nvm_flash_hw)
e1000_fix_nvm_checksum_82571(hw);
- return e1000_validate_nvm_checksum_generic(hw);
+ return e1000e_validate_nvm_checksum_generic(hw);
}
/**
@@ -541,7 +540,7 @@ static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw)
* command has completed before trying to write the next word. After write
* poll for completion.
*
- * If e1000_update_nvm_checksum is not called after this function, the
+ * If e1000e_update_nvm_checksum is not called after this function, the
* EEPROM will most likley contain an invalid checksum.
**/
static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
@@ -565,13 +564,13 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
E1000_NVM_RW_REG_START;
- ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
+ ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
if (ret_val)
break;
ew32(EEWR, eewr);
- ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
+ ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
if (ret_val)
break;
}
@@ -691,7 +690,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
/* Prevent the PCI-E bus from sticking if there is no TLP connection
* on the last TLP read/write transaction when MAC is reset.
*/
- ret_val = e1000_disable_pcie_master(hw);
+ ret_val = e1000e_disable_pcie_master(hw);
if (ret_val)
hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
@@ -737,7 +736,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
e1e_flush();
}
- ret_val = e1000_get_auto_rd_done(hw);
+ ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val)
/* We don't want to continue accessing MAC registers. */
return ret_val;
@@ -773,7 +772,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
e1000_initialize_hw_bits_82571(hw);
/* Initialize identification LED */
- ret_val = e1000_id_led_init(hw);
+ ret_val = e1000e_id_led_init(hw);
if (ret_val) {
hw_dbg(hw, "Error initializing identification LED\n");
return ret_val;
@@ -781,16 +780,16 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
/* Disabling VLAN filtering */
hw_dbg(hw, "Initializing the IEEE VLAN\n");
- e1000_clear_vfta(hw);
+ e1000e_clear_vfta(hw);
/* Setup the receive address. */
/* If, however, a locally administered address was assigned to the
* 82571, we must reserve a RAR for it to work around an issue where
* resetting one port will reload the MAC on the other port.
*/
- if (e1000_get_laa_state_82571(hw))
+ if (e1000e_get_laa_state_82571(hw))
rar_count--;
- e1000_init_rx_addrs(hw, rar_count);
+ e1000e_init_rx_addrs(hw, rar_count);
/* Zero out the Multicast HASH table */
hw_dbg(hw, "Zeroing the MTA\n");
@@ -815,7 +814,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
E1000_TXDCTL_COUNT_DESC;
ew32(TXDCTL1, reg_data);
} else {
- e1000_enable_tx_pkt_filtering(hw);
+ e1000e_enable_tx_pkt_filtering(hw);
reg_data = er32(GCR);
reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
ew32(GCR, reg_data);
@@ -898,13 +897,13 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
}
/**
- * e1000_clear_vfta - Clear VLAN filter table
+ * e1000e_clear_vfta - Clear VLAN filter table
* @hw: pointer to the HW structure
*
* Clears the register array which contains the VLAN filter table by
* setting all the values to 0.
**/
-void e1000_clear_vfta(struct e1000_hw *hw)
+void e1000e_clear_vfta(struct e1000_hw *hw)
{
u32 offset;
u32 vfta_value = 0;
@@ -956,10 +955,10 @@ static void e1000_mc_addr_list_update_82571(struct e1000_hw *hw,
u32 rar_used_count,
u32 rar_count)
{
- if (e1000_get_laa_state_82571(hw))
+ if (e1000e_get_laa_state_82571(hw))
rar_count--;
- e1000_mc_addr_list_update_generic(hw, mc_addr_list, mc_addr_count,
+ e1000e_mc_addr_list_update_generic(hw, mc_addr_list, mc_addr_count,
rar_used_count, rar_count);
}
@@ -982,7 +981,7 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw)
if (hw->mac.type == e1000_82573)
hw->mac.fc = e1000_fc_full;
- return e1000_setup_link(hw);
+ return e1000e_setup_link(hw);
}
/**
@@ -1006,10 +1005,10 @@ static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
switch (hw->phy.type) {
case e1000_phy_m88:
- ret_val = e1000_copper_link_setup_m88(hw);
+ ret_val = e1000e_copper_link_setup_m88(hw);
break;
case e1000_phy_igp_2:
- ret_val = e1000_copper_link_setup_igp(hw);
+ ret_val = e1000e_copper_link_setup_igp(hw);
/* Setup activity LED */
led_ctrl = er32(LEDCTL);
led_ctrl &= IGP_ACTIVITY_LED_MASK;
@@ -1024,7 +1023,7 @@ static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- ret_val = e1000_setup_copper_link(hw);
+ ret_val = e1000e_setup_copper_link(hw);
return ret_val;
}
@@ -1054,7 +1053,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
break;
}
- return e1000_setup_fiber_serdes_link(hw);
+ return e1000e_setup_fiber_serdes_link(hw);
}
/**
@@ -1086,12 +1085,12 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
}
/**
- * e1000_get_laa_state_82571 - Get locally administered address state
+ * e1000e_get_laa_state_82571 - Get locally administered address state
* @hw: pointer to the HW structure
*
* Retrieve and return the current locally administed address state.
**/
-bool e1000_get_laa_state_82571(struct e1000_hw *hw)
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
{
if (hw->mac.type != e1000_82571)
return 0;
@@ -1100,13 +1099,13 @@ bool e1000_get_laa_state_82571(struct e1000_hw *hw)
}
/**
- * e1000_set_laa_state_82571 - Set locally administered address state
+ * e1000e_set_laa_state_82571 - Set locally administered address state
* @hw: pointer to the HW structure
* @state: enable/disable locally administered address
*
* Enable/Disable the current locally administed address state.
**/
-void e1000_set_laa_state_82571(struct e1000_hw *hw, bool state)
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
{
if (hw->mac.type != e1000_82571)
return;
@@ -1121,7 +1120,7 @@ void e1000_set_laa_state_82571(struct e1000_hw *hw, bool state)
* incoming packets directed to this port are dropped.
* Eventually the LAA will be in RAR[0] and RAR[14].
*/
- e1000_rar_set(hw, hw->mac.addr, hw->mac.rar_entry_count - 1);
+ e1000e_rar_set(hw, hw->mac.addr, hw->mac.rar_entry_count - 1);
}
/**
@@ -1167,7 +1166,7 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
ret_val = e1000_write_nvm(hw, 0x23, 1, &data);
if (ret_val)
return ret_val;
- ret_val = e1000_update_nvm_checksum(hw);
+ ret_val = e1000e_update_nvm_checksum(hw);
}
}
@@ -1184,7 +1183,7 @@ static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
{
u32 temp;
- e1000_clear_hw_cntrs_base(hw);
+ e1000e_clear_hw_cntrs_base(hw);
temp = er32(PRC64);
temp = er32(PRC127);
@@ -1225,12 +1224,12 @@ static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
static struct e1000_mac_operations e82571_mac_ops = {
.mng_mode_enab = E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT,
/* .check_for_link: media type dependent */
- .cleanup_led = e1000_cleanup_led_generic,
+ .cleanup_led = e1000e_cleanup_led_generic,
.clear_hw_cntrs = e1000_clear_hw_cntrs_82571,
- .get_bus_info = e1000_get_bus_info_pcie,
+ .get_bus_info = e1000e_get_bus_info_pcie,
/* .get_link_up_info: media type dependent */
- .led_on = e1000_led_on_generic,
- .led_off = e1000_led_off_generic,
+ .led_on = e1000e_led_on_generic,
+ .led_off = e1000e_led_off_generic,
.mc_addr_list_update = e1000_mc_addr_list_update_82571,
.reset_hw = e1000_reset_hw_82571,
.init_hw = e1000_init_hw_82571,
@@ -1240,39 +1239,39 @@ static struct e1000_mac_operations e82571_mac_ops = {
static struct e1000_phy_operations e82_phy_ops_igp = {
.acquire_phy = e1000_get_hw_semaphore_82571,
- .check_reset_block = e1000_check_reset_block_generic,
+ .check_reset_block = e1000e_check_reset_block_generic,
.commit_phy = NULL,
- .force_speed_duplex = e1000_phy_force_speed_duplex_igp,
+ .force_speed_duplex = e1000e_phy_force_speed_duplex_igp,
.get_cfg_done = e1000_get_cfg_done_82571,
- .get_cable_length = e1000_get_cable_length_igp_2,
- .get_phy_info = e1000_get_phy_info_igp,
- .read_phy_reg = e1000_read_phy_reg_igp,
+ .get_cable_length = e1000e_get_cable_length_igp_2,
+ .get_phy_info = e1000e_get_phy_info_igp,
+ .read_phy_reg = e1000e_read_phy_reg_igp,
.release_phy = e1000_put_hw_semaphore_82571,
- .reset_phy = e1000_phy_hw_reset_generic,
+ .reset_phy = e1000e_phy_hw_reset_generic,
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
- .set_d3_lplu_state = e1000_set_d3_lplu_state,
- .write_phy_reg = e1000_write_phy_reg_igp,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_phy_reg = e1000e_write_phy_reg_igp,
};
static struct e1000_phy_operations e82_phy_ops_m88 = {
.acquire_phy = e1000_get_hw_semaphore_82571,
- .check_reset_block = e1000_check_reset_block_generic,
- .commit_phy = e1000_phy_sw_reset,
- .force_speed_duplex = e1000_phy_force_speed_duplex_m88,
- .get_cfg_done = e1000_get_cfg_done,
- .get_cable_length = e1000_get_cable_length_m88,
- .get_phy_info = e1000_get_phy_info_m88,
- .read_phy_reg = e1000_read_phy_reg_m88,
+ .check_reset_block = e1000e_check_reset_block_generic,
+ .commit_phy = e1000e_phy_sw_reset,
+ .force_speed_duplex = e1000e_phy_force_speed_duplex_m88,
+ .get_cfg_done = e1000e_get_cfg_done,
+ .get_cable_length = e1000e_get_cable_length_m88,
+ .get_phy_info = e1000e_get_phy_info_m88,
+ .read_phy_reg = e1000e_read_phy_reg_m88,
.release_phy = e1000_put_hw_semaphore_82571,
- .reset_phy = e1000_phy_hw_reset_generic,
+ .reset_phy = e1000e_phy_hw_reset_generic,
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
- .set_d3_lplu_state = e1000_set_d3_lplu_state,
- .write_phy_reg = e1000_write_phy_reg_m88,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_phy_reg = e1000e_write_phy_reg_m88,
};
static struct e1000_nvm_operations e82571_nvm_ops = {
.acquire_nvm = e1000_acquire_nvm_82571,
- .read_nvm = e1000_read_nvm_spi,
+ .read_nvm = e1000e_read_nvm_spi,
.release_nvm = e1000_release_nvm_82571,
.update_nvm = e1000_update_nvm_checksum_82571,
.valid_led_default = e1000_valid_led_default_82571,
@@ -1282,7 +1281,7 @@ static struct e1000_nvm_operations e82571_nvm_ops = {
static struct e1000_nvm_operations e82573_nvm_ops = {
.acquire_nvm = e1000_acquire_nvm_82571,
- .read_nvm = e1000_read_nvm_eerd,
+ .read_nvm = e1000e_read_nvm_eerd,
.release_nvm = e1000_release_nvm_82571,
.update_nvm = e1000_update_nvm_checksum_82571,
.valid_led_default = e1000_valid_led_default_82571,
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index de17537..3475e48 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -337,26 +337,26 @@ enum latency_range {
latency_invalid = 255
};
-extern char e1000_driver_name[];
-extern const char e1000_driver_version[];
-
-extern void e1000_check_options(struct e1000_adapter *adapter);
-extern void e1000_set_ethtool_ops(struct net_device *netdev);
-
-extern int e1000_up(struct e1000_adapter *adapter);
-extern void e1000_down(struct e1000_adapter *adapter);
-extern void e1000_reinit_locked(struct e1000_adapter *adapter);
-extern void e1000_reset(struct e1000_adapter *adapter);
-extern void e1000_power_up_phy(struct e1000_adapter *adapter);
-extern int e1000_setup_rx_resources(struct e1000_adapter *adapter);
-extern int e1000_setup_tx_resources(struct e1000_adapter *adapter);
-extern void e1000_free_rx_resources(struct e1000_adapter *adapter);
-extern void e1000_free_tx_resources(struct e1000_adapter *adapter);
-extern void e1000_update_stats(struct e1000_adapter *adapter);
+extern char e1000e_driver_name[];
+extern const char e1000e_driver_version[];
+
+extern void e1000e_check_options(struct e1000_adapter *adapter);
+extern void e1000e_set_ethtool_ops(struct net_device *netdev);
+
+extern int e1000e_up(struct e1000_adapter *adapter);
+extern void e1000e_down(struct e1000_adapter *adapter);
+extern void e1000e_reinit_locked(struct e1000_adapter *adapter);
+extern void e1000e_reset(struct e1000_adapter *adapter);
+extern void e1000e_power_up_phy(struct e1000_adapter *adapter);
+extern int e1000e_setup_rx_resources(struct e1000_adapter *adapter);
+extern int e1000e_setup_tx_resources(struct e1000_adapter *adapter);
+extern void e1000e_free_rx_resources(struct e1000_adapter *adapter);
+extern void e1000e_free_tx_resources(struct e1000_adapter *adapter);
+extern void e1000e_update_stats(struct e1000_adapter *adapter);
extern unsigned int copybreak;
-extern char *e1000_get_hw_dev_name(struct e1000_hw *hw);
+extern char *e1000e_get_hw_dev_name(struct e1000_hw *hw);
extern struct e1000_info e1000_82571_info;
extern struct e1000_info e1000_82572_info;
@@ -365,79 +365,79 @@ extern struct e1000_info e1000_ich8_info;
extern struct e1000_info e1000_ich9_info;
extern struct e1000_info e1000_es2_info;
-extern s32 e1000_commit_phy(struct e1000_hw *hw);
+extern s32 e1000e_commit_phy(struct e1000_hw *hw);
-extern bool e1000_enable_mng_pass_thru(struct e1000_hw *hw);
+extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw);
-extern bool e1000_get_laa_state_82571(struct e1000_hw *hw);
-extern void e1000_set_laa_state_82571(struct e1000_hw *hw, bool state);
+extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
-extern void e1000_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
bool state);
-extern void e1000_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
-extern void e1000_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
-
-extern s32 e1000_check_for_copper_link(struct e1000_hw *hw);
-extern s32 e1000_check_for_fiber_link(struct e1000_hw *hw);
-extern s32 e1000_check_for_serdes_link(struct e1000_hw *hw);
-extern s32 e1000_cleanup_led_generic(struct e1000_hw *hw);
-extern s32 e1000_led_on_generic(struct e1000_hw *hw);
-extern s32 e1000_led_off_generic(struct e1000_hw *hw);
-extern s32 e1000_get_bus_info_pcie(struct e1000_hw *hw);
-extern s32 e1000_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex);
-extern s32 e1000_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
-extern s32 e1000_disable_pcie_master(struct e1000_hw *hw);
-extern s32 e1000_get_auto_rd_done(struct e1000_hw *hw);
-extern s32 e1000_id_led_init(struct e1000_hw *hw);
-extern void e1000_clear_hw_cntrs_base(struct e1000_hw *hw);
-extern s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw);
-extern s32 e1000_copper_link_setup_m88(struct e1000_hw *hw);
-extern s32 e1000_copper_link_setup_igp(struct e1000_hw *hw);
-extern s32 e1000_setup_link(struct e1000_hw *hw);
-extern void e1000_clear_vfta(struct e1000_hw *hw);
-extern void e1000_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
-extern void e1000_mc_addr_list_update_generic(struct e1000_hw *hw,
+extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
+extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
+
+extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
+extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
+extern s32 e1000e_check_for_serdes_link(struct e1000_hw *hw);
+extern s32 e1000e_cleanup_led_generic(struct e1000_hw *hw);
+extern s32 e1000e_led_on_generic(struct e1000_hw *hw);
+extern s32 e1000e_led_off_generic(struct e1000_hw *hw);
+extern s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
+extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
+extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
+extern s32 e1000e_id_led_init(struct e1000_hw *hw);
+extern void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw);
+extern s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw);
+extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
+extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
+extern s32 e1000e_setup_link(struct e1000_hw *hw);
+extern void e1000e_clear_vfta(struct e1000_hw *hw);
+extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+extern void e1000e_mc_addr_list_update_generic(struct e1000_hw *hw,
u8 *mc_addr_list, u32 mc_addr_count,
u32 rar_used_count, u32 rar_count);
-extern void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
-extern s32 e1000_set_fc_watermarks(struct e1000_hw *hw);
-extern void e1000_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
-extern s32 e1000_get_hw_semaphore(struct e1000_hw *hw);
-extern s32 e1000_valid_led_default(struct e1000_hw *hw, u16 *data);
-extern void e1000_config_collision_dist(struct e1000_hw *hw);
-extern s32 e1000_config_fc_after_link_up(struct e1000_hw *hw);
-extern s32 e1000_force_mac_fc(struct e1000_hw *hw);
-extern s32 e1000_blink_led(struct e1000_hw *hw);
-extern void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
-extern void e1000_reset_adaptive(struct e1000_hw *hw);
-extern void e1000_update_adaptive(struct e1000_hw *hw);
-
-extern s32 e1000_setup_copper_link(struct e1000_hw *hw);
-extern s32 e1000_get_phy_id(struct e1000_hw *hw);
-extern void e1000_put_hw_semaphore(struct e1000_hw *hw);
-extern s32 e1000_check_reset_block_generic(struct e1000_hw *hw);
-extern s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw);
-extern s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw);
-extern s32 e1000_get_phy_info_igp(struct e1000_hw *hw);
-extern s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw);
-extern s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
-extern s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
-extern s32 e1000_phy_sw_reset(struct e1000_hw *hw);
-extern s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw);
-extern s32 e1000_get_cfg_done(struct e1000_hw *hw);
-extern s32 e1000_get_cable_length_m88(struct e1000_hw *hw);
-extern s32 e1000_get_phy_info_m88(struct e1000_hw *hw);
-extern s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
-extern enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id);
-extern void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
-extern s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
-extern s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
+extern void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
+extern s32 e1000e_set_fc_watermarks(struct e1000_hw *hw);
+extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
+extern s32 e1000e_get_hw_semaphore(struct e1000_hw *hw);
+extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data);
+extern void e1000e_config_collision_dist(struct e1000_hw *hw);
+extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
+extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
+extern s32 e1000e_blink_led(struct e1000_hw *hw);
+extern void e1000e_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
+extern void e1000e_reset_adaptive(struct e1000_hw *hw);
+extern void e1000e_update_adaptive(struct e1000_hw *hw);
+
+extern s32 e1000e_setup_copper_link(struct e1000_hw *hw);
+extern s32 e1000e_get_phy_id(struct e1000_hw *hw);
+extern void e1000e_put_hw_semaphore(struct e1000_hw *hw);
+extern s32 e1000e_check_reset_block_generic(struct e1000_hw *hw);
+extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw);
+extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
+extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
+extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
+extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
+extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
+extern s32 e1000e_get_cfg_done(struct e1000_hw *hw);
+extern s32 e1000e_get_cable_length_m88(struct e1000_hw *hw);
+extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw);
+extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
+extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id);
+extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
+extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
u32 usec_interval, bool *success);
-extern s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
-extern s32 e1000_check_downshift(struct e1000_hw *hw);
+extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
+extern s32 e1000e_check_downshift(struct e1000_hw *hw);
static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
{
@@ -464,23 +464,23 @@ static inline s32 e1000_get_cable_length(struct e1000_hw *hw)
return hw->phy.ops.get_cable_length(hw);
}
-extern s32 e1000_acquire_nvm(struct e1000_hw *hw);
-extern s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-extern s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw);
-extern s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
-extern s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-extern s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-extern s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw);
-extern void e1000_release_nvm(struct e1000_hw *hw);
-extern void e1000_reload_nvm(struct e1000_hw *hw);
-extern s32 e1000_read_mac_addr(struct e1000_hw *hw);
+extern s32 e1000e_acquire_nvm(struct e1000_hw *hw);
+extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
+extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
+extern s32 e1000e_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
+extern void e1000e_release_nvm(struct e1000_hw *hw);
+extern void e1000e_reload_nvm(struct e1000_hw *hw);
+extern s32 e1000e_read_mac_addr(struct e1000_hw *hw);
static inline s32 e1000_validate_nvm_checksum(struct e1000_hw *hw)
{
return hw->nvm.ops.validate_nvm(hw);
}
-static inline s32 e1000_update_nvm_checksum(struct e1000_hw *hw)
+static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
{
return hw->nvm.ops.update_nvm(hw);
}
@@ -500,9 +500,9 @@ static inline s32 e1000_get_phy_info(struct e1000_hw *hw)
return hw->phy.ops.get_phy_info(hw);
}
-extern bool e1000_check_mng_mode(struct e1000_hw *hw);
-extern bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
-extern s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
+extern bool e1000e_check_mng_mode(struct e1000_hw *hw);
+extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
+extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
static inline u32 __er32(struct e1000_hw *hw, unsigned long reg)
{
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 8100d03..88657ad 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -129,7 +129,7 @@ static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
phy->type = e1000_phy_gg82563;
/* This can only be done after all function pointers are setup. */
- ret_val = e1000_get_phy_id(hw);
+ ret_val = e1000e_get_phy_id(hw);
/* Verify phy id */
if (phy->id != GG82563_E_PHY_ID)
@@ -215,15 +215,15 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
switch (hw->media_type) {
case e1000_media_type_copper:
func->setup_physical_interface = e1000_setup_copper_link_80003es2lan;
- func->check_for_link = e1000_check_for_copper_link;
+ func->check_for_link = e1000e_check_for_copper_link;
break;
case e1000_media_type_fiber:
- func->setup_physical_interface = e1000_setup_fiber_serdes_link;
- func->check_for_link = e1000_check_for_fiber_link;
+ func->setup_physical_interface = e1000e_setup_fiber_serdes_link;
+ func->check_for_link = e1000e_check_for_fiber_link;
break;
case e1000_media_type_internal_serdes:
- func->setup_physical_interface = e1000_setup_fiber_serdes_link;
- func->check_for_link = e1000_check_for_serdes_link;
+ func->setup_physical_interface = e1000e_setup_fiber_serdes_link;
+ func->check_for_link = e1000e_check_for_serdes_link;
break;
default:
return -E1000_ERR_CONFIG;
@@ -299,7 +299,7 @@ static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- ret_val = e1000_acquire_nvm(hw);
+ ret_val = e1000e_acquire_nvm(hw);
if (ret_val)
e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
@@ -316,7 +316,7 @@ static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
**/
static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw)
{
- e1000_release_nvm(hw);
+ e1000e_release_nvm(hw);
e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
}
@@ -337,7 +337,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
s32 timeout = 200;
while (i < timeout) {
- if (e1000_get_hw_semaphore(hw))
+ if (e1000e_get_hw_semaphore(hw))
return -E1000_ERR_SWFW_SYNC;
swfw_sync = er32(SW_FW_SYNC);
@@ -346,7 +346,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
/* Firmware currently using resource (fwmask)
* or other software thread using resource (swmask) */
- e1000_put_hw_semaphore(hw);
+ e1000e_put_hw_semaphore(hw);
mdelay(5);
i++;
}
@@ -360,7 +360,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
swfw_sync |= swmask;
ew32(SW_FW_SYNC, swfw_sync);
- e1000_put_hw_semaphore(hw);
+ e1000e_put_hw_semaphore(hw);
return 0;
}
@@ -377,14 +377,14 @@ static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
- while (e1000_get_hw_semaphore(hw) != 0);
+ while (e1000e_get_hw_semaphore(hw) != 0);
/* Empty */
swfw_sync = er32(SW_FW_SYNC);
swfw_sync &= ~mask;
ew32(SW_FW_SYNC, swfw_sync);
- e1000_put_hw_semaphore(hw);
+ e1000e_put_hw_semaphore(hw);
}
/**
@@ -413,7 +413,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
page_select = GG82563_PHY_PAGE_SELECT_ALT;
temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
- ret_val = e1000_write_phy_reg_m88(hw, page_select, temp);
+ ret_val = e1000e_write_phy_reg_m88(hw, page_select, temp);
if (ret_val)
return ret_val;
@@ -424,7 +424,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
/* ...and verify the command was successful. */
- ret_val = e1000_read_phy_reg_m88(hw, page_select, &temp);
+ ret_val = e1000e_read_phy_reg_m88(hw, page_select, &temp);
if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
ret_val = -E1000_ERR_PHY;
@@ -433,7 +433,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
- ret_val = e1000_read_phy_reg_m88(hw,
+ ret_val = e1000e_read_phy_reg_m88(hw,
MAX_PHY_REG_ADDRESS & offset,
data);
@@ -468,7 +468,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
page_select = GG82563_PHY_PAGE_SELECT_ALT;
temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
- ret_val = e1000_write_phy_reg_m88(hw, page_select, temp);
+ ret_val = e1000e_write_phy_reg_m88(hw, page_select, temp);
if (ret_val)
return ret_val;
@@ -480,14 +480,14 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
/* ...and verify the command was successful. */
- ret_val = e1000_read_phy_reg_m88(hw, page_select, &temp);
+ ret_val = e1000e_read_phy_reg_m88(hw, page_select, &temp);
if (((u16)offset >> GG82563_PAGE_SHIFT) != temp)
return -E1000_ERR_PHY;
udelay(200);
- ret_val = e1000_write_phy_reg_m88(hw,
+ ret_val = e1000e_write_phy_reg_m88(hw,
MAX_PHY_REG_ADDRESS & offset,
data);
@@ -509,7 +509,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
static s32 e1000_write_nvm_80003es2lan(struct e1000_hw *hw, u16 offset,
u16 words, u16 *data)
{
- return e1000_write_nvm_spi(hw, offset, words, data);
+ return e1000e_write_nvm_spi(hw, offset, words, data);
}
/**
@@ -572,7 +572,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- e1000_phy_force_speed_duplex_setup(hw, &phy_data);
+ e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
/* Reset the phy to commit changes. */
phy_data |= MII_CR_RESET;
@@ -587,7 +587,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
hw_dbg(hw, "Waiting for forced speed/duplex link "
"on GG82563 phy.\n");
- ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
100000, &link);
if (ret_val)
return ret_val;
@@ -596,13 +596,13 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
/* We didn't get link.
* Reset the DSP and cross our fingers.
*/
- ret_val = e1000_phy_reset_dsp(hw);
+ ret_val = e1000e_phy_reset_dsp(hw);
if (ret_val)
return ret_val;
}
/* Try once more */
- ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
100000, &link);
if (ret_val)
return ret_val;
@@ -672,7 +672,7 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
s32 ret_val;
if (hw->media_type == e1000_media_type_copper) {
- ret_val = e1000_get_speed_and_duplex_copper(hw,
+ ret_val = e1000e_get_speed_and_duplex_copper(hw,
speed,
duplex);
if (ret_val)
@@ -683,7 +683,7 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
ret_val = e1000_cfg_kmrn_10_100_80003es2lan(hw,
*duplex);
} else {
- ret_val = e1000_get_speed_and_duplex_fiber_serdes(hw,
+ ret_val = e1000e_get_speed_and_duplex_fiber_serdes(hw,
speed,
duplex);
}
@@ -707,7 +707,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
/* Prevent the PCI-E bus from sticking if there is no TLP connection
* on the last TLP read/write transaction when MAC is reset.
*/
- ret_val = e1000_disable_pcie_master(hw);
+ ret_val = e1000e_disable_pcie_master(hw);
if (ret_val)
hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
@@ -725,7 +725,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
hw_dbg(hw, "Issuing a global reset to MAC\n");
ew32(CTRL, ctrl | E1000_CTRL_RST);
- ret_val = e1000_get_auto_rd_done(hw);
+ ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val)
/* We don't want to continue accessing MAC registers. */
return ret_val;
@@ -754,7 +754,7 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
e1000_initialize_hw_bits_80003es2lan(hw);
/* Initialize identification LED */
- ret_val = e1000_id_led_init(hw);
+ ret_val = e1000e_id_led_init(hw);
if (ret_val) {
hw_dbg(hw, "Error initializing identification LED\n");
return ret_val;
@@ -762,10 +762,10 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
/* Disabling VLAN filtering */
hw_dbg(hw, "Initializing the IEEE VLAN\n");
- e1000_clear_vfta(hw);
+ e1000e_clear_vfta(hw);
/* Setup the receive address. */
- e1000_init_rx_addrs(hw, mac->rar_entry_count);
+ e1000e_init_rx_addrs(hw, mac->rar_entry_count);
/* Zero out the Multicast HASH table */
hw_dbg(hw, "Zeroing the MTA\n");
@@ -773,7 +773,7 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
/* Setup link and flow control */
- ret_val = e1000_setup_link(hw);
+ ret_val = e1000e_setup_link(hw);
/* Set the transmit descriptor write-back policy */
reg_data = er32(TXDCTL);
@@ -922,14 +922,14 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
return ret_val;
/* SW Reset the PHY so all changes take effect */
- ret_val = e1000_commit_phy(hw);
+ ret_val = e1000e_commit_phy(hw);
if (ret_val) {
hw_dbg(hw, "Error Resetting the PHY\n");
return ret_val;
}
/* Bypass RX and TX FIFO's */
- ret_val = e1000_write_kmrn_reg(hw,
+ ret_val = e1000e_write_kmrn_reg(hw,
E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL,
E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
@@ -957,7 +957,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
* firmware will have already initialized them. We only initialize
* them if the HW is not in IAMT mode.
*/
- if (!e1000_check_mng_mode(hw)) {
+ if (!e1000e_check_mng_mode(hw)) {
/* Enable Electrical Idle on the PHY */
data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
ret_val = e1e_wphy(hw, GG82563_PHY_PWR_MGMT_CTRL, data);
@@ -1010,23 +1010,23 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
/* Set the mac to wait the maximum time between each
* iteration and increase the max iterations when
* polling the phy; this fixes erroneous timeouts at 10Mbps. */
- ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
+ ret_val = e1000e_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
if (ret_val)
return ret_val;
- ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data);
+ ret_val = e1000e_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data);
if (ret_val)
return ret_val;
reg_data |= 0x3F;
- ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data);
+ ret_val = e1000e_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data);
if (ret_val)
return ret_val;
- ret_val = e1000_read_kmrn_reg(hw,
+ ret_val = e1000e_read_kmrn_reg(hw,
E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
®_data);
if (ret_val)
return ret_val;
reg_data |= E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING;
- ret_val = e1000_write_kmrn_reg(hw,
+ ret_val = e1000e_write_kmrn_reg(hw,
E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
reg_data);
if (ret_val)
@@ -1036,7 +1036,7 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- ret_val = e1000_setup_copper_link(hw);
+ ret_val = e1000e_setup_copper_link(hw);
return 0;
}
@@ -1056,7 +1056,7 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
u16 reg_data;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
- ret_val = e1000_write_kmrn_reg(hw,
+ ret_val = e1000e_write_kmrn_reg(hw,
E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
reg_data);
if (ret_val)
@@ -1096,7 +1096,7 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
u32 tipg;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
- ret_val = e1000_write_kmrn_reg(hw,
+ ret_val = e1000e_write_kmrn_reg(hw,
E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
reg_data);
if (ret_val)
@@ -1128,7 +1128,7 @@ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
{
u32 temp;
- e1000_clear_hw_cntrs_base(hw);
+ e1000e_clear_hw_cntrs_base(hw);
temp = er32(PRC64);
temp = er32(PRC127);
@@ -1169,42 +1169,42 @@ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
static struct e1000_mac_operations es2_mac_ops = {
.mng_mode_enab = E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT,
/* check_for_link dependent on media type */
- .cleanup_led = e1000_cleanup_led_generic,
+ .cleanup_led = e1000e_cleanup_led_generic,
.clear_hw_cntrs = e1000_clear_hw_cntrs_80003es2lan,
- .get_bus_info = e1000_get_bus_info_pcie,
+ .get_bus_info = e1000e_get_bus_info_pcie,
.get_link_up_info = e1000_get_link_up_info_80003es2lan,
- .led_on = e1000_led_on_generic,
- .led_off = e1000_led_off_generic,
- .mc_addr_list_update = e1000_mc_addr_list_update_generic,
+ .led_on = e1000e_led_on_generic,
+ .led_off = e1000e_led_off_generic,
+ .mc_addr_list_update = e1000e_mc_addr_list_update_generic,
.reset_hw = e1000_reset_hw_80003es2lan,
.init_hw = e1000_init_hw_80003es2lan,
- .setup_link = e1000_setup_link,
+ .setup_link = e1000e_setup_link,
/* setup_physical_interface dependent on media type */
};
static struct e1000_phy_operations es2_phy_ops = {
.acquire_phy = e1000_acquire_phy_80003es2lan,
- .check_reset_block = e1000_check_reset_block_generic,
- .commit_phy = e1000_phy_sw_reset,
+ .check_reset_block = e1000e_check_reset_block_generic,
+ .commit_phy = e1000e_phy_sw_reset,
.force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan,
.get_cfg_done = e1000_get_cfg_done_80003es2lan,
.get_cable_length = e1000_get_cable_length_80003es2lan,
- .get_phy_info = e1000_get_phy_info_m88,
+ .get_phy_info = e1000e_get_phy_info_m88,
.read_phy_reg = e1000_read_phy_reg_gg82563_80003es2lan,
.release_phy = e1000_release_phy_80003es2lan,
- .reset_phy = e1000_phy_hw_reset_generic,
+ .reset_phy = e1000e_phy_hw_reset_generic,
.set_d0_lplu_state = NULL,
- .set_d3_lplu_state = e1000_set_d3_lplu_state,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
.write_phy_reg = e1000_write_phy_reg_gg82563_80003es2lan,
};
static struct e1000_nvm_operations es2_nvm_ops = {
.acquire_nvm = e1000_acquire_nvm_80003es2lan,
- .read_nvm = e1000_read_nvm_eerd,
+ .read_nvm = e1000e_read_nvm_eerd,
.release_nvm = e1000_release_nvm_80003es2lan,
- .update_nvm = e1000_update_nvm_checksum_generic,
- .valid_led_default = e1000_valid_led_default,
- .validate_nvm = e1000_validate_nvm_checksum_generic,
+ .update_nvm = e1000e_update_nvm_checksum_generic,
+ .valid_led_default = e1000e_valid_led_default,
+ .validate_nvm = e1000e_validate_nvm_checksum_generic,
.write_nvm = e1000_write_nvm_80003es2lan,
};
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index a8fa1db..c9d74a8 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -246,10 +246,10 @@ static int e1000_set_settings(struct net_device *netdev,
/* reset the link */
if (netif_running(adapter->netdev)) {
- e1000_down(adapter);
- e1000_up(adapter);
+ e1000e_down(adapter);
+ e1000e_up(adapter);
} else {
- e1000_reset(adapter);
+ e1000e_reset(adapter);
}
clear_bit(__E1000_RESETTING, &adapter->state);
@@ -300,14 +300,14 @@ static int e1000_set_pauseparam(struct net_device *netdev,
if (adapter->fc_autoneg == AUTONEG_ENABLE) {
if (netif_running(adapter->netdev)) {
- e1000_down(adapter);
- e1000_up(adapter);
+ e1000e_down(adapter);
+ e1000e_up(adapter);
} else {
- e1000_reset(adapter);
+ e1000e_reset(adapter);
}
} else {
retval = ((hw->media_type == e1000_media_type_fiber) ?
- hw->mac.ops.setup_link(hw) : e1000_force_mac_fc(hw));
+ hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
}
clear_bit(__E1000_RESETTING, &adapter->state);
@@ -330,9 +330,9 @@ static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
adapter->flags &= ~FLAG_RX_CSUM_ENABLED;
if (netif_running(netdev))
- e1000_reinit_locked(adapter);
+ e1000e_reinit_locked(adapter);
else
- e1000_reset(adapter);
+ e1000e_reset(adapter);
return 0;
}
@@ -549,7 +549,7 @@ static int e1000_set_eeprom(struct net_device *netdev,
* and flush shadow RAM for 82573 controllers */
if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG) ||
(hw->mac.type == e1000_82573)))
- e1000_update_nvm_checksum(hw);
+ e1000e_update_nvm_checksum(hw);
kfree(eeprom_buff);
return ret_val;
@@ -562,8 +562,8 @@ static void e1000_get_drvinfo(struct net_device *netdev,
char firmware_version[32];
u16 eeprom_data;
- strncpy(drvinfo->driver, e1000_driver_name, 32);
- strncpy(drvinfo->version, e1000_driver_version, 32);
+ strncpy(drvinfo->driver, e1000e_driver_name, 32);
+ strncpy(drvinfo->version, e1000e_driver_version, 32);
/* EEPROM image version # is reported as firmware version # for
* PCI-E controllers */
@@ -613,7 +613,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
msleep(1);
if (netif_running(adapter->netdev))
- e1000_down(adapter);
+ e1000e_down(adapter);
tx_old = adapter->tx_ring;
rx_old = adapter->rx_ring;
@@ -640,10 +640,10 @@ static int e1000_set_ringparam(struct net_device *netdev,
if (netif_running(adapter->netdev)) {
/* Try to get new resources before deleting old */
- err = e1000_setup_rx_resources(adapter);
+ err = e1000e_setup_rx_resources(adapter);
if (err)
goto err_setup_rx;
- err = e1000_setup_tx_resources(adapter);
+ err = e1000e_setup_tx_resources(adapter);
if (err)
goto err_setup_tx;
@@ -651,13 +651,13 @@ static int e1000_set_ringparam(struct net_device *netdev,
* then restore the new back again */
adapter->rx_ring = rx_old;
adapter->tx_ring = tx_old;
- e1000_free_rx_resources(adapter);
- e1000_free_tx_resources(adapter);
+ e1000e_free_rx_resources(adapter);
+ e1000e_free_tx_resources(adapter);
kfree(tx_old);
kfree(rx_old);
adapter->rx_ring = rx_ring;
adapter->tx_ring = tx_ring;
- err = e1000_up(adapter);
+ err = e1000e_up(adapter);
if (err)
goto err_setup;
}
@@ -665,7 +665,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
clear_bit(__E1000_RESETTING, &adapter->state);
return 0;
err_setup_tx:
- e1000_free_rx_resources(adapter);
+ e1000e_free_rx_resources(adapter);
err_setup_rx:
adapter->rx_ring = rx_old;
adapter->tx_ring = tx_old;
@@ -673,7 +673,7 @@ err_setup_rx:
err_alloc_rx:
kfree(tx_ring);
err_alloc_tx:
- e1000_up(adapter);
+ e1000e_up(adapter);
err_setup:
clear_bit(__E1000_RESETTING, &adapter->state);
return err;
@@ -1326,7 +1326,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
if (phy_reg & MII_CR_LOOPBACK) {
phy_reg &= ~MII_CR_LOOPBACK;
e1e_wphy(hw, PHY_CONTROL, phy_reg);
- e1000_commit_phy(hw);
+ e1000e_commit_phy(hw);
}
break;
}
@@ -1517,22 +1517,22 @@ static void e1000_diag_test(struct net_device *netdev,
/* indicate we're in test mode */
dev_close(netdev);
else
- e1000_reset(adapter);
+ e1000e_reset(adapter);
if (e1000_reg_test(adapter, &data[0]))
eth_test->flags |= ETH_TEST_FL_FAILED;
- e1000_reset(adapter);
+ e1000e_reset(adapter);
if (e1000_eeprom_test(adapter, &data[1]))
eth_test->flags |= ETH_TEST_FL_FAILED;
- e1000_reset(adapter);
+ e1000e_reset(adapter);
if (e1000_intr_test(adapter, &data[2]))
eth_test->flags |= ETH_TEST_FL_FAILED;
- e1000_reset(adapter);
+ e1000e_reset(adapter);
/* make sure the phy is powered up */
- e1000_power_up_phy(adapter);
+ e1000e_power_up_phy(adapter);
if (e1000_loopback_test(adapter, &data[3]))
eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1543,7 +1543,7 @@ static void e1000_diag_test(struct net_device *netdev,
/* force this routine to wait until autoneg complete/timeout */
adapter->hw.phy.wait_for_link = 1;
- e1000_reset(adapter);
+ e1000e_reset(adapter);
adapter->hw.phy.wait_for_link = 0;
clear_bit(__E1000_TESTING, &adapter->state);
@@ -1663,7 +1663,7 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
e1e_wphy(&adapter->hw,
IFE_PHY_SPECIAL_CONTROL_LED, 0);
} else {
- e1000_blink_led(&adapter->hw);
+ e1000e_blink_led(&adapter->hw);
msleep_interruptible(data * 1000);
}
@@ -1678,7 +1678,7 @@ static int e1000_nway_reset(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
if (netif_running(netdev))
- e1000_reinit_locked(adapter);
+ e1000e_reinit_locked(adapter);
return 0;
}
@@ -1694,7 +1694,7 @@ static void e1000_get_ethtool_stats(struct net_device *netdev,
struct e1000_adapter *adapter = netdev_priv(netdev);
int i;
- e1000_update_stats(adapter);
+ e1000e_update_stats(adapter);
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
@@ -1758,7 +1758,7 @@ static const struct ethtool_ops e1000_ethtool_ops = {
.get_ethtool_stats = e1000_get_ethtool_stats,
};
-void e1000_set_ethtool_ops(struct net_device *netdev)
+void e1000e_set_ethtool_ops(struct net_device *netdev)
{
SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
}
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 85095af..8f8139d 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -199,10 +199,10 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
phy->reset_delay_us = 100;
phy->id = 0;
- while ((e1000_phy_unknown == e1000_get_phy_type_from_id(phy->id)) &&
+ while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) &&
(i++ < 100)) {
msleep(1);
- ret_val = e1000_get_phy_id(hw);
+ ret_val = e1000e_get_phy_id(hw);
if (ret_val)
return ret_val;
}
@@ -308,7 +308,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
/* Enable PCS Lock-loss workaround for ICH8 */
if (mac->type == e1000_ich8lan)
- e1000_set_kmrn_lock_loss_workaround_ich8lan(hw, 1);
+ e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, 1);
return 0;
}
@@ -420,7 +420,7 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
bool link;
if (phy->type != e1000_phy_ife) {
- ret_val = e1000_phy_force_speed_duplex_igp(hw);
+ ret_val = e1000e_phy_force_speed_duplex_igp(hw);
return ret_val;
}
@@ -428,7 +428,7 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- e1000_phy_force_speed_duplex_setup(hw, &data);
+ e1000e_phy_force_speed_duplex_setup(hw, &data);
ret_val = e1e_wphy(hw, PHY_CONTROL, data);
if (ret_val)
@@ -453,7 +453,7 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
if (phy->wait_for_link) {
hw_dbg(hw, "Waiting for forced speed/duplex link on IFE phy.\n");
- ret_val = e1000_phy_has_link_generic(hw,
+ ret_val = e1000e_phy_has_link_generic(hw,
PHY_FORCE_LIMIT,
100000,
&link);
@@ -464,7 +464,7 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
hw_dbg(hw, "Link taking longer than expected.\n");
/* Try once more */
- ret_val = e1000_phy_has_link_generic(hw,
+ ret_val = e1000e_phy_has_link_generic(hw,
PHY_FORCE_LIMIT,
100000,
&link);
@@ -492,7 +492,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
u16 loop = E1000_ICH8_LAN_INIT_TIMEOUT;
u16 word_addr, reg_data, reg_addr, phy_page = 0;
- ret_val = e1000_phy_hw_reset_generic(hw);
+ ret_val = e1000e_phy_hw_reset_generic(hw);
if (ret_val)
return ret_val;
@@ -604,7 +604,7 @@ static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw)
u16 data;
bool link;
- ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
if (ret_val)
return ret_val;
@@ -658,7 +658,7 @@ static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw)
return e1000_get_phy_info_ife_ich8lan(hw);
break;
case e1000_phy_igp_3:
- return e1000_get_phy_info_igp(hw);
+ return e1000e_get_phy_info_igp(hw);
break;
default:
break;
@@ -735,7 +735,7 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
* any PHY registers */
if ((hw->mac.type == e1000_ich8lan) &&
(hw->phy.type == e1000_phy_igp_3))
- e1000_gig_downshift_workaround_ich8lan(hw);
+ e1000e_gig_downshift_workaround_ich8lan(hw);
/* When LPLU is enabled, we should disable SmartSpeed */
ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
@@ -845,7 +845,7 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
* any PHY registers */
if ((hw->mac.type == e1000_ich8lan) &&
(hw->phy.type == e1000_phy_igp_3))
- e1000_gig_downshift_workaround_ich8lan(hw);
+ e1000e_gig_downshift_workaround_ich8lan(hw);
/* When LPLU is enabled, we should disable SmartSpeed */
ret_val = e1e_rphy(hw,
@@ -1166,7 +1166,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
s32 ret_val;
u16 data;
- ret_val = e1000_update_nvm_checksum_generic(hw);
+ ret_val = e1000e_update_nvm_checksum_generic(hw);
if (ret_val)
return ret_val;;
@@ -1275,7 +1275,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
/* Reload the EEPROM, or else modifications will not appear
* until after the next adapter reset.
*/
- e1000_reload_nvm(hw);
+ e1000e_reload_nvm(hw);
msleep(10);
return ret_val;
@@ -1308,12 +1308,12 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
ret_val = e1000_write_nvm(hw, 0x19, 1, &data);
if (ret_val)
return ret_val;
- ret_val = e1000_update_nvm_checksum(hw);
+ ret_val = e1000e_update_nvm_checksum(hw);
if (ret_val)
return ret_val;
}
- return e1000_validate_nvm_checksum_generic(hw);
+ return e1000e_validate_nvm_checksum_generic(hw);
}
/**
@@ -1583,7 +1583,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
struct e1000_bus_info *bus = &hw->bus;
s32 ret_val;
- ret_val = e1000_get_bus_info_pcie(hw);
+ ret_val = e1000e_get_bus_info_pcie(hw);
/* ICH devices are "PCI Express"-ish. They have
* a configuration space, but do not contain
@@ -1611,7 +1611,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
/* Prevent the PCI-E bus from sticking if there is no TLP connection
* on the last TLP read/write transaction when MAC is reset.
*/
- ret_val = e1000_disable_pcie_master(hw);
+ ret_val = e1000e_disable_pcie_master(hw);
if (ret_val) {
hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
}
@@ -1651,7 +1651,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
ew32(CTRL, (ctrl | E1000_CTRL_RST));
msleep(20);
- ret_val = e1000_get_auto_rd_done(hw);
+ ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val) {
/*
* When auto config read does not complete, do not
@@ -1693,14 +1693,14 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
e1000_initialize_hw_bits_ich8lan(hw);
/* Initialize identification LED */
- ret_val = e1000_id_led_init(hw);
+ ret_val = e1000e_id_led_init(hw);
if (ret_val) {
hw_dbg(hw, "Error initializing identification LED\n");
return ret_val;
}
/* Setup the receive address. */
- e1000_init_rx_addrs(hw, mac->rar_entry_count);
+ e1000e_init_rx_addrs(hw, mac->rar_entry_count);
/* Zero out the Multicast HASH table */
hw_dbg(hw, "Zeroing the MTA\n");
@@ -1730,7 +1730,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
snoop = PCIE_ICH8_SNOOP_ALL;
else
snoop = (u32) ~(PCIE_NO_SNOOP_ALL);
- e1000_set_pcie_no_snoop(hw, snoop);
+ e1000e_set_pcie_no_snoop(hw, snoop);
ctrl_ext = er32(CTRL_EXT);
ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
@@ -1831,7 +1831,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
ew32(FCTTV, mac->fc_pause_time);
- return e1000_set_fc_watermarks(hw);
+ return e1000e_set_fc_watermarks(hw);
}
/**
@@ -1856,24 +1856,24 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
/* Set the mac to wait the maximum time between each iteration
* and increase the max iterations when polling the phy;
* this fixes erroneous timeouts at 10Mbps. */
- ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
+ ret_val = e1000e_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
if (ret_val)
return ret_val;
- ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data);
+ ret_val = e1000e_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data);
if (ret_val)
return ret_val;
reg_data |= 0x3F;
- ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data);
+ ret_val = e1000e_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data);
if (ret_val)
return ret_val;
if (hw->phy.type == e1000_phy_igp_3) {
- ret_val = e1000_copper_link_setup_igp(hw);
+ ret_val = e1000e_copper_link_setup_igp(hw);
if (ret_val)
return ret_val;
}
- return e1000_setup_copper_link(hw);
+ return e1000e_setup_copper_link(hw);
}
/**
@@ -1891,7 +1891,7 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
{
s32 ret_val;
- ret_val = e1000_get_speed_and_duplex_copper(hw, speed, duplex);
+ ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex);
if (ret_val)
return ret_val;
@@ -1933,7 +1933,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
/* Make sure link is up before proceeding. If not just return.
* Attempting this while link is negotiating fouled up link
* stability */
- ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
if (!link)
return 0;
@@ -1963,7 +1963,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
/* Call gig speed drop workaround on Giga disable before accessing
* any PHY registers */
- e1000_gig_downshift_workaround_ich8lan(hw);
+ e1000e_gig_downshift_workaround_ich8lan(hw);
/* unable to acquire PCS lock */
return -E1000_ERR_PHY;
@@ -1977,7 +1977,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
* If ICH8, set the current Kumeran workaround state (enabled - TRUE
* /disabled - FALSE).
**/
-void e1000_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
bool state)
{
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
@@ -2000,7 +2000,7 @@ void e1000_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
* 3) read it back
* Continue if successful, else issue LCD reset and repeat
**/
-void e1000_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
+void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
{
u32 reg;
u16 data;
@@ -2020,7 +2020,7 @@ void e1000_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
/* Call gig speed drop workaround on Giga disable before
* accessing any PHY registers */
if (hw->mac.type == e1000_ich8lan)
- e1000_gig_downshift_workaround_ich8lan(hw);
+ e1000e_gig_downshift_workaround_ich8lan(hw);
/* Write VR power-down enable */
e1e_rphy(hw, IGP3_VR_CTRL, &data);
@@ -2041,7 +2041,7 @@ void e1000_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
}
/**
- * e1000_gig_downshift_workaround_ich8lan - WoL from S5 stops working
+ * e1000e_gig_downshift_workaround_ich8lan - WoL from S5 stops working
* @hw: pointer to the HW structure
*
* Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC),
@@ -2050,7 +2050,7 @@ void e1000_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
* 2) Clear Kumeran Near-end loopback
* Should only be called for ICH8[m] devices with IGP_3 Phy.
**/
-void e1000_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
+void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
{
s32 ret_val;
u16 reg_data;
@@ -2059,17 +2059,17 @@ void e1000_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
(hw->phy.type != e1000_phy_igp_3))
return;
- ret_val = e1000_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
+ ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
®_data);
if (ret_val)
return;
reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK;
- ret_val = e1000_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
+ ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
reg_data);
if (ret_val)
return;
reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK;
- ret_val = e1000_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
+ ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
reg_data);
}
@@ -2131,7 +2131,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
{
u32 temp;
- e1000_clear_hw_cntrs_base(hw);
+ e1000e_clear_hw_cntrs_base(hw);
temp = er32(ALGNERRC);
temp = er32(RXERRC);
@@ -2151,14 +2151,14 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
static struct e1000_mac_operations ich8_mac_ops = {
.mng_mode_enab = E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT,
- .check_for_link = e1000_check_for_copper_link,
+ .check_for_link = e1000e_check_for_copper_link,
.cleanup_led = e1000_cleanup_led_ich8lan,
.clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
.get_bus_info = e1000_get_bus_info_ich8lan,
.get_link_up_info = e1000_get_link_up_info_ich8lan,
.led_on = e1000_led_on_ich8lan,
.led_off = e1000_led_off_ich8lan,
- .mc_addr_list_update = e1000_mc_addr_list_update_generic,
+ .mc_addr_list_update = e1000e_mc_addr_list_update_generic,
.reset_hw = e1000_reset_hw_ich8lan,
.init_hw = e1000_init_hw_ich8lan,
.setup_link = e1000_setup_link_ich8lan,
@@ -2170,15 +2170,15 @@ static struct e1000_phy_operations ich8_phy_ops = {
.check_reset_block = e1000_check_reset_block_ich8lan,
.commit_phy = NULL,
.force_speed_duplex = e1000_phy_force_speed_duplex_ich8lan,
- .get_cfg_done = e1000_get_cfg_done,
- .get_cable_length = e1000_get_cable_length_igp_2,
+ .get_cfg_done = e1000e_get_cfg_done,
+ .get_cable_length = e1000e_get_cable_length_igp_2,
.get_phy_info = e1000_get_phy_info_ich8lan,
- .read_phy_reg = e1000_read_phy_reg_igp,
+ .read_phy_reg = e1000e_read_phy_reg_igp,
.release_phy = e1000_release_swflag_ich8lan,
.reset_phy = e1000_phy_hw_reset_ich8lan,
.set_d0_lplu_state = e1000_set_d0_lplu_state_ich8lan,
.set_d3_lplu_state = e1000_set_d3_lplu_state_ich8lan,
- .write_phy_reg = e1000_write_phy_reg_igp,
+ .write_phy_reg = e1000e_write_phy_reg_igp,
};
static struct e1000_nvm_operations ich8_nvm_ops = {
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index c92ea77..a04c1e4 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -47,14 +47,14 @@ enum e1000_mng_mode {
* Technology signature */
/**
- * e1000_get_bus_info_pcie - Get PCIe bus information
+ * e1000e_get_bus_info_pcie - Get PCIe bus information
* @hw: pointer to the HW structure
*
* Determines and stores the system bus information for a particular
* network interface. The following bus information is determined and stored:
* bus speed, bus width, type (PCIe), and PCIe function.
**/
-s32 e1000_get_bus_info_pcie(struct e1000_hw *hw)
+s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
{
struct e1000_bus_info *bus = &hw->bus;
struct e1000_adapter *adapter = hw->adapter;
@@ -87,7 +87,7 @@ s32 e1000_get_bus_info_pcie(struct e1000_hw *hw)
}
/**
- * e1000_write_vfta - Write value to VLAN filter table
+ * e1000e_write_vfta - Write value to VLAN filter table
* @hw: pointer to the HW structure
* @offset: register offset in VLAN filter table
* @value: register value written to VLAN filter table
@@ -95,14 +95,14 @@ s32 e1000_get_bus_info_pcie(struct e1000_hw *hw)
* Writes value at the given offset in the register array which stores
* the VLAN filter table.
**/
-void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+void e1000e_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
{
E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value);
e1e_flush();
}
/**
- * e1000_init_rx_addrs - Initialize receive address's
+ * e1000e_init_rx_addrs - Initialize receive address's
* @hw: pointer to the HW structure
* @rar_count: receive address registers
*
@@ -110,14 +110,14 @@ void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
* register to the devices MAC address and clearing all the other receive
* address registers to 0.
**/
-void e1000_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
+void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
{
u32 i;
/* Setup the receive address */
hw_dbg(hw, "Programming MAC Address into RAR[0]\n");
- e1000_rar_set(hw, hw->mac.addr, 0);
+ e1000e_rar_set(hw, hw->mac.addr, 0);
/* Zero out the other (rar_entry_count - 1) receive addresses */
hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1);
@@ -130,7 +130,7 @@ void e1000_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
}
/**
- * e1000_rar_set - Set receive address register
+ * e1000e_rar_set - Set receive address register
* @hw: pointer to the HW structure
* @addr: pointer to the receive address
* @index: receive address array register
@@ -138,7 +138,7 @@ void e1000_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
* Sets the receive address array register at index to the address passed
* in by addr.
**/
-void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
{
u32 rar_low, rar_high;
@@ -260,7 +260,7 @@ static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
}
/**
- * e1000_mc_addr_list_update_generic - Update Multicast addresses
+ * e1000e_mc_addr_list_update_generic - Update Multicast addresses
* @hw: pointer to the HW structure
* @mc_addr_list: array of multicast addresses to program
* @mc_addr_count: number of multicast addresses to program
@@ -272,7 +272,7 @@ static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
* The parameter rar_count will usually be hw->mac.rar_entry_count
* unless there are workarounds that change this.
**/
-void e1000_mc_addr_list_update_generic(struct e1000_hw *hw,
+void e1000e_mc_addr_list_update_generic(struct e1000_hw *hw,
u8 *mc_addr_list, u32 mc_addr_count,
u32 rar_used_count, u32 rar_count)
{
@@ -285,7 +285,7 @@ void e1000_mc_addr_list_update_generic(struct e1000_hw *hw,
*/
for (i = rar_used_count; i < rar_count; i++) {
if (mc_addr_count) {
- e1000_rar_set(hw, mc_addr_list, i);
+ e1000e_rar_set(hw, mc_addr_list, i);
mc_addr_count--;
mc_addr_list += ETH_ALEN;
} else {
@@ -313,12 +313,12 @@ void e1000_mc_addr_list_update_generic(struct e1000_hw *hw,
}
/**
- * e1000_clear_hw_cntrs_base - Clear base hardware counters
+ * e1000e_clear_hw_cntrs_base - Clear base hardware counters
* @hw: pointer to the HW structure
*
* Clears the base hardware counters by reading the counter registers.
**/
-void e1000_clear_hw_cntrs_base(struct e1000_hw *hw)
+void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
{
u32 temp;
@@ -362,14 +362,14 @@ void e1000_clear_hw_cntrs_base(struct e1000_hw *hw)
}
/**
- * e1000_check_for_copper_link - Check for link (Copper)
+ * e1000e_check_for_copper_link - Check for link (Copper)
* @hw: pointer to the HW structure
*
* Checks to see of the link status of the hardware has changed. If a
* change in link status has been detected, then we read the PHY registers
* to get the current speed/duplex if link exists.
**/
-s32 e1000_check_for_copper_link(struct e1000_hw *hw)
+s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
@@ -387,7 +387,7 @@ s32 e1000_check_for_copper_link(struct e1000_hw *hw)
* link. If so, then we want to get the current speed/duplex
* of the PHY.
*/
- ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
if (ret_val)
return ret_val;
@@ -398,7 +398,7 @@ s32 e1000_check_for_copper_link(struct e1000_hw *hw)
/* Check if there was DownShift, must be checked
* immediately after link-up */
- e1000_check_downshift(hw);
+ e1000e_check_downshift(hw);
/* If we are forcing speed/duplex, then we simply return since
* we have already determined whether we have link or not.
@@ -412,14 +412,14 @@ s32 e1000_check_for_copper_link(struct e1000_hw *hw)
* of MAC speed/duplex configuration. So we only need to
* configure Collision Distance in the MAC.
*/
- e1000_config_collision_dist(hw);
+ e1000e_config_collision_dist(hw);
/* Configure Flow Control now that Auto-Neg has completed.
* First, we need to restore the desired flow control
* settings because we may have had to re-autoneg with a
* different link partner.
*/
- ret_val = e1000_config_fc_after_link_up(hw);
+ ret_val = e1000e_config_fc_after_link_up(hw);
if (ret_val) {
hw_dbg(hw, "Error configuring flow control\n");
}
@@ -428,13 +428,13 @@ s32 e1000_check_for_copper_link(struct e1000_hw *hw)
}
/**
- * e1000_check_for_fiber_link - Check for link (Fiber)
+ * e1000e_check_for_fiber_link - Check for link (Fiber)
* @hw: pointer to the HW structure
*
* Checks for link up on the hardware. If link is not up and we have
* a signal, then we need to force link up.
**/
-s32 e1000_check_for_fiber_link(struct e1000_hw *hw)
+s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
u32 rxcw;
@@ -471,7 +471,7 @@ s32 e1000_check_for_fiber_link(struct e1000_hw *hw)
ew32(CTRL, ctrl);
/* Configure Flow Control after forcing link up. */
- ret_val = e1000_config_fc_after_link_up(hw);
+ ret_val = e1000e_config_fc_after_link_up(hw);
if (ret_val) {
hw_dbg(hw, "Error configuring flow control\n");
return ret_val;
@@ -493,13 +493,13 @@ s32 e1000_check_for_fiber_link(struct e1000_hw *hw)
}
/**
- * e1000_check_for_serdes_link - Check for link (Serdes)
+ * e1000e_check_for_serdes_link - Check for link (Serdes)
* @hw: pointer to the HW structure
*
* Checks for link up on the hardware. If link is not up and we have
* a signal, then we need to force link up.
**/
-s32 e1000_check_for_serdes_link(struct e1000_hw *hw)
+s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
u32 rxcw;
@@ -534,7 +534,7 @@ s32 e1000_check_for_serdes_link(struct e1000_hw *hw)
ew32(CTRL, ctrl);
/* Configure Flow Control after forcing link up. */
- ret_val = e1000_config_fc_after_link_up(hw);
+ ret_val = e1000e_config_fc_after_link_up(hw);
if (ret_val) {
hw_dbg(hw, "Error configuring flow control\n");
return ret_val;
@@ -619,7 +619,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
}
/**
- * e1000_setup_link - Setup flow control and link settings
+ * e1000e_setup_link - Setup flow control and link settings
* @hw: pointer to the HW structure
*
* Determines which flow control settings to use, then configures flow
@@ -628,7 +628,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
* should be established. Assumes the hardware has previously been reset
* and the transmitter and receiver are not enabled.
**/
-s32 e1000_setup_link(struct e1000_hw *hw)
+s32 e1000e_setup_link(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
@@ -668,7 +668,7 @@ s32 e1000_setup_link(struct e1000_hw *hw)
ew32(FCTTV, mac->fc_pause_time);
- return e1000_set_fc_watermarks(hw);
+ return e1000e_set_fc_watermarks(hw);
}
/**
@@ -786,13 +786,13 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
}
/**
- * e1000_setup_fiber_serdes_link - Setup link for fiber/serdes
+ * e1000e_setup_fiber_serdes_link - Setup link for fiber/serdes
* @hw: pointer to the HW structure
*
* Configures collision distance and flow control for fiber and serdes
* links. Upon successful setup, poll for link.
**/
-s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
+s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
{
u32 ctrl;
s32 ret_val;
@@ -802,7 +802,7 @@ s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
/* Take the link out of reset */
ctrl &= ~E1000_CTRL_LRST;
- e1000_config_collision_dist(hw);
+ e1000e_config_collision_dist(hw);
ret_val = e1000_commit_fc_settings_generic(hw);
if (ret_val)
@@ -835,14 +835,14 @@ s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
}
/**
- * e1000_config_collision_dist - Configure collision distance
+ * e1000e_config_collision_dist - Configure collision distance
* @hw: pointer to the HW structure
*
* Configures the collision distance to the default value and is used
* during link setup. Currently no func pointer exists and all
* implementations are handled in the generic version of this function.
**/
-void e1000_config_collision_dist(struct e1000_hw *hw)
+void e1000e_config_collision_dist(struct e1000_hw *hw)
{
u32 tctl;
@@ -856,14 +856,14 @@ void e1000_config_collision_dist(struct e1000_hw *hw)
}
/**
- * e1000_set_fc_watermarks - Set flow control high/low watermarks
+ * e1000e_set_fc_watermarks - Set flow control high/low watermarks
* @hw: pointer to the HW structure
*
* Sets the flow control high/low threshold (watermark) registers. If
* flow control XON frame transmission is enabled, then set XON frame
* tansmission as well.
**/
-s32 e1000_set_fc_watermarks(struct e1000_hw *hw)
+s32 e1000e_set_fc_watermarks(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
u32 fcrtl = 0, fcrth = 0;
@@ -890,7 +890,7 @@ s32 e1000_set_fc_watermarks(struct e1000_hw *hw)
}
/**
- * e1000_force_mac_fc - Force the MAC's flow control settings
+ * e1000e_force_mac_fc - Force the MAC's flow control settings
* @hw: pointer to the HW structure
*
* Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the
@@ -899,7 +899,7 @@ s32 e1000_set_fc_watermarks(struct e1000_hw *hw)
* autonegotiation is managed by the PHY rather than the MAC. Software must
* also configure these bits when link is forced on a fiber connection.
**/
-s32 e1000_force_mac_fc(struct e1000_hw *hw)
+s32 e1000e_force_mac_fc(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
u32 ctrl;
@@ -951,7 +951,7 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw)
}
/**
- * e1000_config_fc_after_link_up - Configures flow control after link
+ * e1000e_config_fc_after_link_up - Configures flow control after link
* @hw: pointer to the HW structure
*
* Checks the status of auto-negotiation after link up to ensure that the
@@ -960,7 +960,7 @@ s32 e1000_force_mac_fc(struct e1000_hw *hw)
* and did not fail, then we configure flow control based on our link
* partner.
**/
-s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
+s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
s32 ret_val = 0;
@@ -974,10 +974,10 @@ s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
if (mac->autoneg_failed) {
if (hw->media_type == e1000_media_type_fiber ||
hw->media_type == e1000_media_type_internal_serdes)
- ret_val = e1000_force_mac_fc(hw);
+ ret_val = e1000e_force_mac_fc(hw);
} else {
if (hw->media_type == e1000_media_type_copper)
- ret_val = e1000_force_mac_fc(hw);
+ ret_val = e1000e_force_mac_fc(hw);
}
if (ret_val) {
@@ -1147,7 +1147,7 @@ s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
/* Now we call a subroutine to actually force the MAC
* controller to use the correct flow control settings.
*/
- ret_val = e1000_force_mac_fc(hw);
+ ret_val = e1000e_force_mac_fc(hw);
if (ret_val) {
hw_dbg(hw, "Error forcing flow control settings\n");
return ret_val;
@@ -1158,7 +1158,7 @@ s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
}
/**
- * e1000_get_speed_and_duplex_copper - Retreive current speed/duplex
+ * e1000e_get_speed_and_duplex_copper - Retreive current speed/duplex
* @hw: pointer to the HW structure
* @speed: stores the current speed
* @duplex: stores the current duplex
@@ -1166,7 +1166,7 @@ s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
* Read the status register for the current speed/duplex and store the current
* speed and duplex for copper connections.
**/
-s32 e1000_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex)
{
u32 status;
@@ -1194,7 +1194,7 @@ s32 e1000_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dupl
}
/**
- * e1000_get_speed_and_duplex_fiber_serdes - Retreive current speed/duplex
+ * e1000e_get_speed_and_duplex_fiber_serdes - Retreive current speed/duplex
* @hw: pointer to the HW structure
* @speed: stores the current speed
* @duplex: stores the current duplex
@@ -1202,7 +1202,7 @@ s32 e1000_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dupl
* Sets the speed and duplex to gigabit full duplex (the only possible option)
* for fiber/serdes links.
**/
-s32 e1000_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex)
{
*speed = SPEED_1000;
*duplex = FULL_DUPLEX;
@@ -1211,12 +1211,12 @@ s32 e1000_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16
}
/**
- * e1000_get_hw_semaphore - Acquire hardware semaphore
+ * e1000e_get_hw_semaphore - Acquire hardware semaphore
* @hw: pointer to the HW structure
*
* Acquire the HW semaphore to access the PHY or NVM
**/
-s32 e1000_get_hw_semaphore(struct e1000_hw *hw)
+s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
{
u32 swsm;
s32 timeout = hw->nvm.word_size + 1;
@@ -1251,7 +1251,7 @@ s32 e1000_get_hw_semaphore(struct e1000_hw *hw)
if (i == timeout) {
/* Release semaphores */
- e1000_put_hw_semaphore(hw);
+ e1000e_put_hw_semaphore(hw);
hw_dbg(hw, "Driver can't access the NVM\n");
return -E1000_ERR_NVM;
}
@@ -1260,12 +1260,12 @@ s32 e1000_get_hw_semaphore(struct e1000_hw *hw)
}
/**
- * e1000_put_hw_semaphore - Release hardware semaphore
+ * e1000e_put_hw_semaphore - Release hardware semaphore
* @hw: pointer to the HW structure
*
* Release hardware semaphore used to access the PHY or NVM
**/
-void e1000_put_hw_semaphore(struct e1000_hw *hw)
+void e1000e_put_hw_semaphore(struct e1000_hw *hw)
{
u32 swsm;
@@ -1275,12 +1275,12 @@ void e1000_put_hw_semaphore(struct e1000_hw *hw)
}
/**
- * e1000_get_auto_rd_done - Check for auto read completion
+ * e1000e_get_auto_rd_done - Check for auto read completion
* @hw: pointer to the HW structure
*
* Check EEPROM for Auto Read done bit.
**/
-s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
+s32 e1000e_get_auto_rd_done(struct e1000_hw *hw)
{
s32 i = 0;
@@ -1300,14 +1300,14 @@ s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
}
/**
- * e1000_valid_led_default - Verify a valid default LED config
+ * e1000e_valid_led_default - Verify a valid default LED config
* @hw: pointer to the HW structure
* @data: pointer to the NVM (EEPROM)
*
* Read the EEPROM for the current default LED configuration. If the
* LED configuration is not valid, set to a valid LED configuration.
**/
-s32 e1000_valid_led_default(struct e1000_hw *hw, u16 *data)
+s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data)
{
s32 ret_val;
@@ -1324,11 +1324,11 @@ s32 e1000_valid_led_default(struct e1000_hw *hw, u16 *data)
}
/**
- * e1000_id_led_init -
+ * e1000e_id_led_init -
* @hw: pointer to the HW structure
*
**/
-s32 e1000_id_led_init(struct e1000_hw *hw)
+s32 e1000e_id_led_init(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
s32 ret_val;
@@ -1388,25 +1388,25 @@ s32 e1000_id_led_init(struct e1000_hw *hw)
}
/**
- * e1000_cleanup_led_generic - Set LED config to default operation
+ * e1000e_cleanup_led_generic - Set LED config to default operation
* @hw: pointer to the HW structure
*
* Remove the current LED configuration and set the LED configuration
* to the default value, saved from the EEPROM.
**/
-s32 e1000_cleanup_led_generic(struct e1000_hw *hw)
+s32 e1000e_cleanup_led_generic(struct e1000_hw *hw)
{
ew32(LEDCTL, hw->mac.ledctl_default);
return 0;
}
/**
- * e1000_blink_led - Blink LED
+ * e1000e_blink_led - Blink LED
* @hw: pointer to the HW structure
*
* Blink the led's which are set to be on.
**/
-s32 e1000_blink_led(struct e1000_hw *hw)
+s32 e1000e_blink_led(struct e1000_hw *hw)
{
u32 ledctl_blink = 0;
u32 i;
@@ -1432,12 +1432,12 @@ s32 e1000_blink_led(struct e1000_hw *hw)
}
/**
- * e1000_led_on_generic - Turn LED on
+ * e1000e_led_on_generic - Turn LED on
* @hw: pointer to the HW structure
*
* Turn LED on.
**/
-s32 e1000_led_on_generic(struct e1000_hw *hw)
+s32 e1000e_led_on_generic(struct e1000_hw *hw)
{
u32 ctrl;
@@ -1459,12 +1459,12 @@ s32 e1000_led_on_generic(struct e1000_hw *hw)
}
/**
- * e1000_led_off_generic - Turn LED off
+ * e1000e_led_off_generic - Turn LED off
* @hw: pointer to the HW structure
*
* Turn LED off.
**/
-s32 e1000_led_off_generic(struct e1000_hw *hw)
+s32 e1000e_led_off_generic(struct e1000_hw *hw)
{
u32 ctrl;
@@ -1486,13 +1486,13 @@ s32 e1000_led_off_generic(struct e1000_hw *hw)
}
/**
- * e1000_set_pcie_no_snoop - Set PCI-express capabilities
+ * e1000e_set_pcie_no_snoop - Set PCI-express capabilities
* @hw: pointer to the HW structure
* @no_snoop: bitmap of snoop events
*
* Set the PCI-express register to snoop for events enabled in 'no_snoop'.
**/
-void e1000_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop)
+void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop)
{
u32 gcr;
@@ -1505,7 +1505,7 @@ void e1000_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop)
}
/**
- * e1000_disable_pcie_master - Disables PCI-express master access
+ * e1000e_disable_pcie_master - Disables PCI-express master access
* @hw: pointer to the HW structure
*
* Returns 0 if successful, else returns -10
@@ -1515,7 +1515,7 @@ void e1000_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop)
* Disables PCI-Express master access and verifies there are no pending
* requests.
**/
-s32 e1000_disable_pcie_master(struct e1000_hw *hw)
+s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
{
u32 ctrl;
s32 timeout = MASTER_DISABLE_TIMEOUT;
@@ -1541,12 +1541,12 @@ s32 e1000_disable_pcie_master(struct e1000_hw *hw)
}
/**
- * e1000_reset_adaptive - Reset Adaptive Interframe Spacing
+ * e1000e_reset_adaptive - Reset Adaptive Interframe Spacing
* @hw: pointer to the HW structure
*
* Reset the Adaptive Interframe Spacing throttle to default values.
**/
-void e1000_reset_adaptive(struct e1000_hw *hw)
+void e1000e_reset_adaptive(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
@@ -1561,13 +1561,13 @@ void e1000_reset_adaptive(struct e1000_hw *hw)
}
/**
- * e1000_update_adaptive - Update Adaptive Interframe Spacing
+ * e1000e_update_adaptive - Update Adaptive Interframe Spacing
* @hw: pointer to the HW structure
*
* Update the Adaptive Interframe Spacing Throttle value based on the
* time between transmitted packets and time between collisions.
**/
-void e1000_update_adaptive(struct e1000_hw *hw)
+void e1000e_update_adaptive(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
@@ -1704,14 +1704,14 @@ static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
}
/**
- * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ * e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion
* @hw: pointer to the HW structure
* @ee_reg: EEPROM flag for polling
*
* Polls the EEPROM status bit for either read or write completion based
* upon the value of 'ee_reg'.
**/
-s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
+s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
{
u32 attempts = 100000;
u32 i, reg = 0;
@@ -1732,14 +1732,14 @@ s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
}
/**
- * e1000_acquire_nvm - Generic request for access to EEPROM
+ * e1000e_acquire_nvm - Generic request for access to EEPROM
* @hw: pointer to the HW structure
*
* Set the EEPROM access request bit and wait for EEPROM access grant bit.
* Return successful if access grant bit set, else clear the request for
* EEPROM access and return -E1000_ERR_NVM (-1).
**/
-s32 e1000_acquire_nvm(struct e1000_hw *hw)
+s32 e1000e_acquire_nvm(struct e1000_hw *hw)
{
u32 eecd = er32(EECD);
s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
@@ -1808,12 +1808,12 @@ static void e1000_stop_nvm(struct e1000_hw *hw)
}
/**
- * e1000_release_nvm - Release exclusive access to EEPROM
+ * e1000e_release_nvm - Release exclusive access to EEPROM
* @hw: pointer to the HW structure
*
* Stop any current commands to the EEPROM and clear the EEPROM request bit.
**/
-void e1000_release_nvm(struct e1000_hw *hw)
+void e1000e_release_nvm(struct e1000_hw *hw)
{
u32 eecd;
@@ -1870,7 +1870,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
}
/**
- * e1000_read_nvm_spi - Read EEPROM's using SPI
+ * e1000e_read_nvm_spi - Read EEPROM's using SPI
* @hw: pointer to the HW structure
* @offset: offset of word in the EEPROM to read
* @words: number of words to read
@@ -1878,7 +1878,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
*
* Reads a 16 bit word from the EEPROM.
**/
-s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+s32 e1000e_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
struct e1000_nvm_info *nvm = &hw->nvm;
u32 i = 0;
@@ -1926,7 +1926,7 @@ s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
}
/**
- * e1000_read_nvm_eerd - Reads EEPROM using EERD register
+ * e1000e_read_nvm_eerd - Reads EEPROM using EERD register
* @hw: pointer to the HW structure
* @offset: offset of word in the EEPROM to read
* @words: number of words to read
@@ -1934,7 +1934,7 @@ s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
*
* Reads a 16 bit word from the EEPROM using the EERD register.
**/
-s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
struct e1000_nvm_info *nvm = &hw->nvm;
u32 i, eerd = 0;
@@ -1953,7 +1953,7 @@ s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
E1000_NVM_RW_REG_START;
ew32(EERD, eerd);
- ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
+ ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
if (ret_val)
break;
@@ -1965,7 +1965,7 @@ s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
}
/**
- * e1000_write_nvm_spi - Write to EEPROM using SPI
+ * e1000e_write_nvm_spi - Write to EEPROM using SPI
* @hw: pointer to the HW structure
* @offset: offset within the EEPROM to be written to
* @words: number of words to write
@@ -1973,10 +1973,10 @@ s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
*
* Writes data to EEPROM at offset using SPI interface.
*
- * If e1000_update_nvm_checksum is not called after this function , the
+ * If e1000e_update_nvm_checksum is not called after this function , the
* EEPROM will most likley contain an invalid checksum.
**/
-s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
struct e1000_nvm_info *nvm = &hw->nvm;
s32 ret_val;
@@ -2042,14 +2042,14 @@ s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
}
/**
- * e1000_read_mac_addr - Read device MAC address
+ * e1000e_read_mac_addr - Read device MAC address
* @hw: pointer to the HW structure
*
* Reads the device MAC address from the EEPROM and stores the value.
* Since devices with two ports use the same EEPROM, we increment the
* last bit in the MAC address for the second port.
**/
-s32 e1000_read_mac_addr(struct e1000_hw *hw)
+s32 e1000e_read_mac_addr(struct e1000_hw *hw)
{
s32 ret_val;
u16 offset, nvm_data, i;
@@ -2076,13 +2076,13 @@ s32 e1000_read_mac_addr(struct e1000_hw *hw)
}
/**
- * e1000_validate_nvm_checksum_generic - Validate EEPROM checksum
+ * e1000e_validate_nvm_checksum_generic - Validate EEPROM checksum
* @hw: pointer to the HW structure
*
* Calculates the EEPROM checksum by reading/adding each word of the EEPROM
* and then verifies that the sum of the EEPROM is equal to 0xBABA.
**/
-s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw)
+s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw)
{
s32 ret_val;
u16 checksum = 0;
@@ -2106,14 +2106,14 @@ s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw)
}
/**
- * e1000_update_nvm_checksum_generic - Update EEPROM checksum
+ * e1000e_update_nvm_checksum_generic - Update EEPROM checksum
* @hw: pointer to the HW structure
*
* Updates the EEPROM checksum by reading/adding each word of the EEPROM
* up to the checksum. Then calculates the EEPROM checksum and writes the
* value to the EEPROM.
**/
-s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw)
+s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
{
s32 ret_val;
u16 checksum = 0;
@@ -2136,13 +2136,13 @@ s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw)
}
/**
- * e1000_reload_nvm - Reloads EEPROM
+ * e1000e_reload_nvm - Reloads EEPROM
* @hw: pointer to the HW structure
*
* Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
* extended control register.
**/
-void e1000_reload_nvm(struct e1000_hw *hw)
+void e1000e_reload_nvm(struct e1000_hw *hw)
{
u32 ctrl_ext;
@@ -2213,13 +2213,13 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
}
/**
- * e1000_check_mng_mode - check managament mode
+ * e1000e_check_mng_mode - check managament mode
* @hw: pointer to the HW structure
*
* Reads the firmware semaphore register and returns true (>0) if
* manageability is enabled, else false (0).
**/
-bool e1000_check_mng_mode(struct e1000_hw *hw)
+bool e1000e_check_mng_mode(struct e1000_hw *hw)
{
u32 fwsm = er32(FWSM);
@@ -2227,13 +2227,13 @@ bool e1000_check_mng_mode(struct e1000_hw *hw)
}
/**
- * e1000_enable_tx_pkt_filtering - Enable packet filtering on TX
+ * e1000e_enable_tx_pkt_filtering - Enable packet filtering on TX
* @hw: pointer to the HW structure
*
* Enables packet filtering on transmit packets if manageability is enabled
* and host interface is enabled.
**/
-bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
+bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
{
struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
u32 *buffer = (u32 *)&hw->mng_cookie;
@@ -2242,7 +2242,7 @@ bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
u8 i, len;
/* No manageability, no filtering */
- if (!e1000_check_mng_mode(hw)) {
+ if (!e1000e_check_mng_mode(hw)) {
hw->mac.tx_pkt_filtering = 0;
return 0;
}
@@ -2383,14 +2383,14 @@ static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
}
/**
- * e1000_mng_write_dhcp_info - Writes DHCP info to host interface
+ * e1000e_mng_write_dhcp_info - Writes DHCP info to host interface
* @hw: pointer to the HW structure
* @buffer: pointer to the host interface
* @length: size of the buffer
*
* Writes the DHCP information to the host interface.
**/
-s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
+s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
{
struct e1000_host_mng_command_header hdr;
s32 ret_val;
@@ -2426,12 +2426,12 @@ s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
}
/**
- * e1000_enable_mng_pass_thru - Enable processing of ARP's
+ * e1000e_enable_mng_pass_thru - Enable processing of ARP's
* @hw: pointer to the HW structure
*
* Verifies the hardware needs to allow ARPs to be processed by the host.
**/
-bool e1000_enable_mng_pass_thru(struct e1000_hw *hw)
+bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
{
u32 manc;
u32 fwsm, factps;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 01a9a4f..d711e14 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -47,8 +47,8 @@
#include "e1000.h"
#define DRV_VERSION "0.2.0"
-char e1000_driver_name[] = "e1000e";
-const char e1000_driver_version[] = DRV_VERSION;
+char e1000e_driver_name[] = "e1000e";
+const char e1000e_driver_version[] = DRV_VERSION;
static const struct e1000_info *e1000_info_tbl[] = {
[board_82571] = &e1000_82571_info,
@@ -64,7 +64,7 @@ static const struct e1000_info *e1000_info_tbl[] = {
* e1000_get_hw_dev_name - return device name string
* used by hardware layer to print debugging information
**/
-char *e1000_get_hw_dev_name(struct e1000_hw *hw)
+char *e1000e_get_hw_dev_name(struct e1000_hw *hw)
{
struct e1000_adapter *adapter = hw->back;
struct net_device *netdev = adapter->netdev;
@@ -1108,7 +1108,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
* disconnect (LSC) before accessing any PHY registers */
if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
(!(er32(STATUS) & E1000_STATUS_LU)))
- e1000_gig_downshift_workaround_ich8lan(hw);
+ e1000e_gig_downshift_workaround_ich8lan(hw);
/* 80003ES2LAN workaround-- For packet buffer work-around on
* link down event; disable receives here in the ISR and reset
@@ -1169,7 +1169,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
* disconnect (LSC) before accessing any PHY registers */
if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
(!(er32(STATUS) & E1000_STATUS_LU)))
- e1000_gig_downshift_workaround_ich8lan(hw);
+ e1000e_gig_downshift_workaround_ich8lan(hw);
/* 80003ES2LAN workaround--
* For packet buffer work-around on link down event;
@@ -1352,12 +1352,12 @@ static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
}
/**
- * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
+ * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
* @adapter: board private structure
*
* Return 0 on success, negative on failure
**/
-int e1000_setup_tx_resources(struct e1000_adapter *adapter)
+int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
{
struct e1000_ring *tx_ring = adapter->tx_ring;
int err = -ENOMEM, size;
@@ -1389,12 +1389,12 @@ err:
}
/**
- * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
+ * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
* @adapter: board private structure
*
* Returns 0 on success, negative on failure
**/
-int e1000_setup_rx_resources(struct e1000_adapter *adapter)
+int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
{
struct e1000_ring *rx_ring = adapter->rx_ring;
int size, desc_len, err = -ENOMEM;
@@ -1464,12 +1464,12 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
}
/**
- * e1000_free_tx_resources - Free Tx Resources per Queue
+ * e1000e_free_tx_resources - Free Tx Resources per Queue
* @adapter: board private structure
*
* Free all transmit software resources
**/
-void e1000_free_tx_resources(struct e1000_adapter *adapter)
+void e1000e_free_tx_resources(struct e1000_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
struct e1000_ring *tx_ring = adapter->tx_ring;
@@ -1484,13 +1484,13 @@ void e1000_free_tx_resources(struct e1000_adapter *adapter)
}
/**
- * e1000_free_rx_resources - Free Rx Resources
+ * e1000e_free_rx_resources - Free Rx Resources
* @adapter: board private structure
*
* Free all receive software resources
**/
-void e1000_free_rx_resources(struct e1000_adapter *adapter)
+void e1000e_free_rx_resources(struct e1000_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
struct e1000_ring *rx_ring = adapter->rx_ring;
@@ -1693,7 +1693,7 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
index = (vid >> 5) & 0x7F;
vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
vfta |= (1 << (vid & 0x1F));
- e1000_write_vfta(hw, index, vfta);
+ e1000e_write_vfta(hw, index, vfta);
}
static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
@@ -1718,7 +1718,7 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
index = (vid >> 5) & 0x7F;
vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
vfta &= ~(1 << (vid & 0x1F));
- e1000_write_vfta(hw, index, vfta);
+ e1000e_write_vfta(hw, index, vfta);
}
static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
@@ -1904,7 +1904,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
ew32(TARC1, tarc);
}
- e1000_config_collision_dist(hw);
+ e1000e_config_collision_dist(hw);
/* Setup Transmit Descriptor Settings for eop descriptor */
adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
@@ -2237,14 +2237,14 @@ static void e1000_configure(struct e1000_adapter *adapter)
}
/**
- * e1000_power_up_phy - restore link in case the phy was powered down
+ * e1000e_power_up_phy - restore link in case the phy was powered down
* @adapter: address of board private structure
*
* The phy may be powered down to save power and turn off link when the
* driver is unloaded and wake on lan is not enabled (among others)
- * *** this routine MUST be followed by a call to e1000_reset ***
+ * *** this routine MUST be followed by a call to e1000e_reset ***
**/
-void e1000_power_up_phy(struct e1000_adapter *adapter)
+void e1000e_power_up_phy(struct e1000_adapter *adapter)
{
u16 mii_reg = 0;
@@ -2280,7 +2280,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
return;
/* reset is blocked because of a SoL/IDER session */
- if (e1000_check_mng_mode(hw) ||
+ if (e1000e_check_mng_mode(hw) ||
e1000_check_reset_block(hw))
return;
@@ -2296,14 +2296,14 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
}
/**
- * e1000_reset - bring the hardware into a known good state
+ * e1000e_reset - bring the hardware into a known good state
*
* This function boots the hardware and enables some settings that
* require a configuration cycle of the hardware - those cannot be
* set/changed during runtime. After reset the device needs to be
* properly configured for rx, tx etc.
*/
-void e1000_reset(struct e1000_adapter *adapter)
+void e1000e_reset(struct e1000_adapter *adapter)
{
struct e1000_mac_info *mac = &adapter->hw.mac;
struct e1000_hw *hw = &adapter->hw;
@@ -2388,7 +2388,7 @@ void e1000_reset(struct e1000_adapter *adapter)
/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
ew32(VET, ETH_P_8021Q);
- e1000_reset_adaptive(hw);
+ e1000e_reset_adaptive(hw);
e1000_get_phy_info(hw);
if (!(adapter->flags & FLAG_SMART_POWER_DOWN)) {
@@ -2404,7 +2404,7 @@ void e1000_reset(struct e1000_adapter *adapter)
e1000_release_manageability(adapter);
}
-int e1000_up(struct e1000_adapter *adapter)
+int e1000e_up(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
@@ -2421,7 +2421,7 @@ int e1000_up(struct e1000_adapter *adapter)
return 0;
}
-void e1000_down(struct e1000_adapter *adapter)
+void e1000e_down(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
struct e1000_hw *hw = &adapter->hw;
@@ -2457,7 +2457,7 @@ void e1000_down(struct e1000_adapter *adapter)
adapter->link_speed = 0;
adapter->link_duplex = 0;
- e1000_reset(adapter);
+ e1000e_reset(adapter);
e1000_clean_tx_ring(adapter);
e1000_clean_rx_ring(adapter);
@@ -2467,13 +2467,13 @@ void e1000_down(struct e1000_adapter *adapter)
*/
}
-void e1000_reinit_locked(struct e1000_adapter *adapter)
+void e1000e_reinit_locked(struct e1000_adapter *adapter)
{
might_sleep();
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
msleep(1);
- e1000_down(adapter);
- e1000_up(adapter);
+ e1000e_down(adapter);
+ e1000e_up(adapter);
clear_bit(__E1000_RESETTING, &adapter->state);
}
@@ -2544,16 +2544,16 @@ static int e1000_open(struct net_device *netdev)
return -EBUSY;
/* allocate transmit descriptors */
- err = e1000_setup_tx_resources(adapter);
+ err = e1000e_setup_tx_resources(adapter);
if (err)
goto err_setup_tx;
/* allocate receive descriptors */
- err = e1000_setup_rx_resources(adapter);
+ err = e1000e_setup_rx_resources(adapter);
if (err)
goto err_setup_rx;
- e1000_power_up_phy(adapter);
+ e1000e_power_up_phy(adapter);
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
if ((adapter->hw.mng_cookie.status &
@@ -2563,7 +2563,7 @@ static int e1000_open(struct net_device *netdev)
/* If AMT is enabled, let the firmware know that the network
* interface is now open */
if ((adapter->flags & FLAG_HAS_AMT) &&
- e1000_check_mng_mode(&adapter->hw))
+ e1000e_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
/* before we allocate an interrupt, we must be ready to handle it.
@@ -2576,7 +2576,7 @@ static int e1000_open(struct net_device *netdev)
if (err)
goto err_req_irq;
- /* From here on the code is the same as e1000_up() */
+ /* From here on the code is the same as e1000e_up() */
clear_bit(__E1000_DOWN, &adapter->state);
netif_poll_enable(netdev);
@@ -2591,11 +2591,11 @@ static int e1000_open(struct net_device *netdev)
err_req_irq:
e1000_release_hw_control(adapter);
e1000_power_down_phy(adapter);
- e1000_free_rx_resources(adapter);
+ e1000e_free_rx_resources(adapter);
err_setup_rx:
- e1000_free_tx_resources(adapter);
+ e1000e_free_tx_resources(adapter);
err_setup_tx:
- e1000_reset(adapter);
+ e1000e_reset(adapter);
return err;
}
@@ -2616,12 +2616,12 @@ static int e1000_close(struct net_device *netdev)
struct e1000_adapter *adapter = netdev_priv(netdev);
WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
- e1000_down(adapter);
+ e1000e_down(adapter);
e1000_power_down_phy(adapter);
e1000_free_irq(adapter);
- e1000_free_tx_resources(adapter);
- e1000_free_rx_resources(adapter);
+ e1000e_free_tx_resources(adapter);
+ e1000e_free_rx_resources(adapter);
/* kill manageability vlan ID if supported, but not if a vlan with
* the same ID is registered on the host OS (let 8021q kill it) */
@@ -2634,7 +2634,7 @@ static int e1000_close(struct net_device *netdev)
/* If AMT is enabled, let the firmware know that the network
* interface is now closed */
if ((adapter->flags & FLAG_HAS_AMT) &&
- e1000_check_mng_mode(&adapter->hw))
+ e1000e_check_mng_mode(&adapter->hw))
e1000_release_hw_control(adapter);
return 0;
@@ -2657,11 +2657,11 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
- e1000_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
+ e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
/* activate the work around */
- e1000_set_laa_state_82571(&adapter->hw, 1);
+ e1000e_set_laa_state_82571(&adapter->hw, 1);
/* Hold a copy of the LAA in RAR[14] This is done so that
* between the time RAR[0] gets clobbered and the time it
@@ -2669,7 +2669,7 @@ static int e1000_set_mac(struct net_device *netdev, void *p)
* of the RARs and no incoming packets directed to this port
* are dropped. Eventually the LAA will be in RAR[0] and
* RAR[14] */
- e1000_rar_set(&adapter->hw,
+ e1000e_rar_set(&adapter->hw,
adapter->hw.mac.addr,
adapter->hw.mac.rar_entry_count - 1);
}
@@ -2686,10 +2686,10 @@ static void e1000_update_phy_info(unsigned long data)
}
/**
- * e1000_update_stats - Update the board statistics counters
+ * e1000e_update_stats - Update the board statistics counters
* @adapter: board private structure
**/
-void e1000_update_stats(struct e1000_adapter *adapter)
+void e1000e_update_stats(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
struct pci_dev *pdev = adapter->pdev;
@@ -2903,7 +2903,7 @@ static void e1000_watchdog_task(struct work_struct *work)
"Gigabit has been disabled, downgrading speed\n");
}
- if ((e1000_enable_tx_pkt_filtering(hw)) &&
+ if ((e1000e_enable_tx_pkt_filtering(hw)) &&
(adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
e1000_update_mng_vlan(adapter);
@@ -3005,7 +3005,7 @@ static void e1000_watchdog_task(struct work_struct *work)
}
link_up:
- e1000_update_stats(adapter);
+ e1000e_update_stats(adapter);
mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
adapter->tpt_old = adapter->stats.tpt;
@@ -3017,7 +3017,7 @@ link_up:
adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
adapter->gotcl_old = adapter->stats.gotcl;
- e1000_update_adaptive(&adapter->hw);
+ e1000e_update_adaptive(&adapter->hw);
if (!netif_carrier_ok(netdev)) {
tx_pending = (e1000_desc_unused(tx_ring) + 1 <
@@ -3040,8 +3040,8 @@ link_up:
/* With 82571 controllers, LAA may be overwritten due to controller
* reset from the other port. Set the appropriate LAA in RAR[0] */
- if (e1000_get_laa_state_82571(hw))
- e1000_rar_set(hw, adapter->hw.mac.addr, 0);
+ if (e1000e_get_laa_state_82571(hw))
+ e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
/* Reset the timer */
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -3358,7 +3358,7 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
offset = (u8 *)udp + 8 - skb->data;
length = skb->len - offset;
- return e1000_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
+ return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
}
return 0;
@@ -3540,7 +3540,7 @@ static void e1000_reset_task(struct work_struct *work)
struct e1000_adapter *adapter;
adapter = container_of(work, struct e1000_adapter, reset_task);
- e1000_reinit_locked(adapter);
+ e1000e_reinit_locked(adapter);
}
/**
@@ -3596,10 +3596,10 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
msleep(1);
- /* e1000_down has a dependency on max_frame_size */
+ /* e1000e_down has a dependency on max_frame_size */
adapter->hw.mac.max_frame_size = max_frame;
if (netif_running(netdev))
- e1000_down(adapter);
+ e1000e_down(adapter);
/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
* means we reserve 2 more, this pushes us to allocate from the next
@@ -3630,9 +3630,9 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
netdev->mtu = new_mtu;
if (netif_running(netdev))
- e1000_up(adapter);
+ e1000e_up(adapter);
else
- e1000_reset(adapter);
+ e1000e_reset(adapter);
clear_bit(__E1000_RESETTING, &adapter->state);
@@ -3696,7 +3696,7 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
if (netif_running(netdev)) {
WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
- e1000_down(adapter);
+ e1000e_down(adapter);
e1000_free_irq(adapter);
}
@@ -3737,7 +3737,7 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
}
/* Allow time for pending master requests to run */
- e1000_disable_pcie_master(&adapter->hw);
+ e1000e_disable_pcie_master(&adapter->hw);
ew32(WUC, E1000_WUC_PME_EN);
ew32(WUFC, wufc);
@@ -3759,7 +3759,7 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
}
if (adapter->hw.phy.type == e1000_phy_igp_3)
- e1000_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
+ e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
@@ -3800,21 +3800,21 @@ static int e1000_resume(struct pci_dev *pdev)
return err;
}
- e1000_power_up_phy(adapter);
- e1000_reset(adapter);
+ e1000e_power_up_phy(adapter);
+ e1000e_reset(adapter);
ew32(WUS, ~0);
e1000_init_manageability(adapter);
if (netif_running(netdev))
- e1000_up(adapter);
+ e1000e_up(adapter);
netif_device_attach(netdev);
/* If the controller has AMT, do not set DRV_LOAD until the interface
* is up. For all other cases, let the f/w know that the h/w is now
* under the control of the driver. */
- if (!(adapter->flags & FLAG_HAS_AMT) || !e1000_check_mng_mode(&adapter->hw))
+ if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
return 0;
@@ -3862,7 +3862,7 @@ static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
netif_device_detach(netdev);
if (netif_running(netdev))
- e1000_down(adapter);
+ e1000e_down(adapter);
pci_disable_device(pdev);
/* Request a slot slot reset. */
@@ -3892,7 +3892,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
- e1000_reset(adapter);
+ e1000e_reset(adapter);
ew32(WUS, ~0);
return PCI_ERS_RESULT_RECOVERED;
@@ -3914,7 +3914,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
e1000_init_manageability(adapter);
if (netif_running(netdev)) {
- if (e1000_up(adapter)) {
+ if (e1000e_up(adapter)) {
dev_err(&pdev->dev,
"can't bring device back up after reset\n");
return;
@@ -3927,7 +3927,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
* is up. For all other cases, let the f/w know that the h/w is now
* under the control of the driver. */
if (!(adapter->flags & FLAG_HAS_AMT) ||
- !e1000_check_mng_mode(&adapter->hw))
+ !e1000e_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
}
@@ -4001,7 +4001,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
}
- err = pci_request_regions(pdev, e1000_driver_name);
+ err = pci_request_regions(pdev, e1000e_driver_name);
if (err)
goto err_pci_reg;
@@ -4053,7 +4053,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
netdev->set_mac_address = &e1000_set_mac;
netdev->change_mtu = &e1000_change_mtu;
netdev->do_ioctl = &e1000_ioctl;
- e1000_set_ethtool_ops(netdev);
+ e1000e_set_ethtool_ops(netdev);
netdev->tx_timeout = &e1000_tx_timeout;
netdev->watchdog_timeo = 5 * HZ;
netdev->poll = &e1000_clean;
@@ -4119,7 +4119,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
* it. */
netdev->features |= NETIF_F_LLTX;
- if (e1000_enable_mng_pass_thru(&adapter->hw))
+ if (e1000e_enable_mng_pass_thru(&adapter->hw))
adapter->flags |= FLAG_MNG_PT_ENABLED;
/* before reading the NVM, reset the controller to
@@ -4141,7 +4141,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
/* copy the MAC address out of the NVM */
- if (e1000_read_mac_addr(&adapter->hw))
+ if (e1000e_read_mac_addr(&adapter->hw))
ndev_err(netdev, "NVM Read Error while reading MAC address\n");
memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
@@ -4168,7 +4168,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
INIT_WORK(&adapter->reset_task, e1000_reset_task);
INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
- e1000_check_options(adapter);
+ e1000e_check_options(adapter);
/* Initialize link parameters. User can change them with ethtool */
adapter->hw.mac.autoneg = 1;
@@ -4214,13 +4214,13 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->wol = adapter->eeprom_wol;
/* reset the hardware with the new settings */
- e1000_reset(adapter);
+ e1000e_reset(adapter);
/* If the controller has AMT, do not set DRV_LOAD until the interface
* is up. For all other cases, let the f/w know that the h/w is now
* under the control of the driver. */
if (!(adapter->flags & FLAG_HAS_AMT) ||
- !e1000_check_mng_mode(&adapter->hw))
+ !e1000e_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
/* tell the stack to leave us alone until e1000_open() is called */
@@ -4315,7 +4315,7 @@ static struct pci_error_handlers e1000_err_handler = {
.resume = e1000_io_resume,
};
-static struct pci_device_id e1000e_pci_tbl[] = {
+static struct pci_device_id e1000_pci_tbl[] = {
/*
* Support for 82571/2/3, es2lan and ich8 will be phased in
* stepwise.
@@ -4358,12 +4358,12 @@ static struct pci_device_id e1000e_pci_tbl[] = {
{ } /* terminate list */
};
-MODULE_DEVICE_TABLE(pci, e1000e_pci_tbl);
+MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
/* PCI Device API Driver */
static struct pci_driver e1000_driver = {
- .name = e1000_driver_name,
- .id_table = e1000e_pci_tbl,
+ .name = e1000e_driver_name,
+ .id_table = e1000_pci_tbl,
.probe = e1000_probe,
.remove = __devexit_p(e1000_remove),
#ifdef CONFIG_PM
@@ -4381,17 +4381,17 @@ static struct pci_driver e1000_driver = {
* e1000_init_module is the first routine called when the driver is
* loaded. All it does is register with the PCI subsystem.
**/
-static int __init e1000e_init_module(void)
+static int __init e1000_init_module(void)
{
int ret;
printk(KERN_INFO "Intel(R) PRO/1000 Network Driver - %s\n",
- e1000_driver_version);
+ e1000e_driver_version);
printk(KERN_INFO "Copyright (c) 1999-2007 Intel Corporation.\n");
ret = pci_register_driver(&e1000_driver);
return ret;
}
-module_init(e1000e_init_module);
+module_init(e1000_init_module);
/**
* e1000_exit_module - Driver Exit Cleanup Routine
@@ -4399,11 +4399,11 @@ module_init(e1000e_init_module);
* e1000_exit_module is called just before the driver is removed
* from memory.
**/
-static void __exit e1000e_exit_module(void)
+static void __exit e1000_exit_module(void)
{
pci_unregister_driver(&e1000_driver);
}
-module_exit(e1000e_exit_module);
+module_exit(e1000_exit_module);
MODULE_AUTHOR("Intel Corporation, <linux.nics@...el.com>");
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 9a70d22..e4e655e 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -192,7 +192,7 @@ static int __devinit e1000_validate_option(int *value,
}
/**
- * e1000_check_options - Range Checking for Command Line Parameters
+ * e1000e_check_options - Range Checking for Command Line Parameters
* @adapter: board private structure
*
* This routine checks all command line parameters for valid user
@@ -200,7 +200,7 @@ static int __devinit e1000_validate_option(int *value,
* value exists, a default value is used. The final value is stored
* in a variable in the adapter structure.
**/
-void __devinit e1000_check_options(struct e1000_adapter *adapter)
+void __devinit e1000e_check_options(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
@@ -371,11 +371,11 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
int kmrn_lock_loss = KumeranLockLoss[bd];
e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
if (hw->mac.type == e1000_ich8lan)
- e1000_set_kmrn_lock_loss_workaround_ich8lan(hw,
+ e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
kmrn_lock_loss);
} else {
if (hw->mac.type == e1000_ich8lan)
- e1000_set_kmrn_lock_loss_workaround_ich8lan(hw,
+ e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
opt.def);
}
}
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index c9304d8..1efb47a 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -53,14 +53,14 @@ static const u16 e1000_igp_2_cable_length_table[] =
sizeof(e1000_igp_2_cable_length_table[0]))
/**
- * e1000_check_reset_block_generic - Check if PHY reset is blocked
+ * e1000e_check_reset_block_generic - Check if PHY reset is blocked
* @hw: pointer to the HW structure
*
* Read the PHY management control register and check whether a PHY reset
* is blocked. If a reset is not blocked return 0, otherwise
* return E1000_BLK_PHY_RESET (12).
**/
-s32 e1000_check_reset_block_generic(struct e1000_hw *hw)
+s32 e1000e_check_reset_block_generic(struct e1000_hw *hw)
{
u32 manc;
@@ -71,13 +71,13 @@ s32 e1000_check_reset_block_generic(struct e1000_hw *hw)
}
/**
- * e1000_get_phy_id - Retrieve the PHY ID and revision
+ * e1000e_get_phy_id - Retrieve the PHY ID and revision
* @hw: pointer to the HW structure
*
* Reads the PHY registers and stores the PHY ID and possibly the PHY
* revision in the hardware structure.
**/
-s32 e1000_get_phy_id(struct e1000_hw *hw)
+s32 e1000e_get_phy_id(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -100,12 +100,12 @@ s32 e1000_get_phy_id(struct e1000_hw *hw)
}
/**
- * e1000_phy_reset_dsp - Reset PHY DSP
+ * e1000e_phy_reset_dsp - Reset PHY DSP
* @hw: pointer to the HW structure
*
* Reset the digital signal processor.
**/
-s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
+s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
{
s32 ret_val;
@@ -210,7 +210,7 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
}
/**
- * e1000_read_phy_reg_m88 - Read m88 PHY register
+ * e1000e_read_phy_reg_m88 - Read m88 PHY register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
@@ -219,7 +219,7 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
* and storing the retrieved information in data. Release any acquired
* semaphores before exiting.
**/
-s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
{
s32 ret_val;
@@ -237,7 +237,7 @@ s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
}
/**
- * e1000_write_phy_reg_m88 - Write m88 PHY register
+ * e1000e_write_phy_reg_m88 - Write m88 PHY register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
@@ -245,7 +245,7 @@ s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
* Acquires semaphore, if necessary, then writes the data to PHY register
* at the offset. Release any acquired semaphores before exiting.
**/
-s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
+s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
{
s32 ret_val;
@@ -263,7 +263,7 @@ s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
}
/**
- * e1000_read_phy_reg_igp - Read igp PHY register
+ * e1000e_read_phy_reg_igp - Read igp PHY register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
@@ -272,7 +272,7 @@ s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
* and storing the retrieved information in data. Release any acquired
* semaphores before exiting.
**/
-s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
{
s32 ret_val;
@@ -300,7 +300,7 @@ s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
}
/**
- * e1000_write_phy_reg_igp - Write igp PHY register
+ * e1000e_write_phy_reg_igp - Write igp PHY register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
@@ -308,7 +308,7 @@ s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
* Acquires semaphore, if necessary, then writes the data to PHY register
* at the offset. Release any acquired semaphores before exiting.
**/
-s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
{
s32 ret_val;
@@ -336,7 +336,7 @@ s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
}
/**
- * e1000_read_kmrn_reg - Read kumeran register
+ * e1000e_read_kmrn_reg - Read kumeran register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
@@ -345,7 +345,7 @@ s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
* using the kumeran interface. The information retrieved is stored in data.
* Release any acquired semaphores before exiting.
**/
-s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
{
u32 kmrnctrlsta;
s32 ret_val;
@@ -369,7 +369,7 @@ s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
}
/**
- * e1000_write_kmrn_reg - Write kumeran register
+ * e1000e_write_kmrn_reg - Write kumeran register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
@@ -378,7 +378,7 @@ s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
* at the offset using the kumeran interface. Release any acquired semaphores
* before exiting.
**/
-s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
+s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
{
u32 kmrnctrlsta;
s32 ret_val;
@@ -398,13 +398,13 @@ s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
}
/**
- * e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link
+ * e1000e_copper_link_setup_m88 - Setup m88 PHY's for copper link
* @hw: pointer to the HW structure
*
* Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock
* and downshift values are set also.
**/
-s32 e1000_copper_link_setup_m88(struct e1000_hw *hw)
+s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -484,7 +484,7 @@ s32 e1000_copper_link_setup_m88(struct e1000_hw *hw)
}
/* Commit the changes. */
- ret_val = e1000_commit_phy(hw);
+ ret_val = e1000e_commit_phy(hw);
if (ret_val)
hw_dbg(hw, "Error committing the PHY changes\n");
@@ -492,13 +492,13 @@ s32 e1000_copper_link_setup_m88(struct e1000_hw *hw)
}
/**
- * e1000_copper_link_setup_igp - Setup igp PHY's for copper link
+ * e1000e_copper_link_setup_igp - Setup igp PHY's for copper link
* @hw: pointer to the HW structure
*
* Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
* igp PHY's.
**/
-s32 e1000_copper_link_setup_igp(struct e1000_hw *hw)
+s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -715,7 +715,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
/* Since there really isn't a way to advertise that we are
* capable of RX Pause ONLY, we will advertise that we
* support both symmetric and asymmetric RX PAUSE. Later
- * (in e1000_config_fc_after_link_up) we will disable the
+ * (in e1000e_config_fc_after_link_up) we will disable the
* hw's ability to send PAUSE frames.
*/
mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
@@ -816,7 +816,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
}
/**
- * e1000_setup_copper_link - Configure copper link settings
+ * e1000e_setup_copper_link - Configure copper link settings
* @hw: pointer to the HW structure
*
* Calls the appropriate function to configure the link for auto-neg or forced
@@ -824,7 +824,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
* to configure collision distance and flow control are called. If link is
* not established, we return -E1000_ERR_PHY (-2).
**/
-s32 e1000_setup_copper_link(struct e1000_hw *hw)
+s32 e1000e_setup_copper_link(struct e1000_hw *hw)
{
s32 ret_val;
bool link;
@@ -849,7 +849,7 @@ s32 e1000_setup_copper_link(struct e1000_hw *hw)
/* Check link status. Wait up to 100 microseconds for link to become
* valid.
*/
- ret_val = e1000_phy_has_link_generic(hw,
+ ret_val = e1000e_phy_has_link_generic(hw,
COPPER_LINK_UP_LIMIT,
10,
&link);
@@ -858,8 +858,8 @@ s32 e1000_setup_copper_link(struct e1000_hw *hw)
if (link) {
hw_dbg(hw, "Valid link established!!!\n");
- e1000_config_collision_dist(hw);
- ret_val = e1000_config_fc_after_link_up(hw);
+ e1000e_config_collision_dist(hw);
+ ret_val = e1000e_config_fc_after_link_up(hw);
} else {
hw_dbg(hw, "Unable to establish link!!!\n");
}
@@ -868,14 +868,14 @@ s32 e1000_setup_copper_link(struct e1000_hw *hw)
}
/**
- * e1000_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
+ * e1000e_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
* @hw: pointer to the HW structure
*
* Calls the PHY setup function to force speed and duplex. Clears the
* auto-crossover to force MDI manually. Waits for link and returns
* successful if link up is successful, else -E1000_ERR_PHY (-2).
**/
-s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw)
+s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -886,7 +886,7 @@ s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- e1000_phy_force_speed_duplex_setup(hw, &phy_data);
+ e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
if (ret_val)
@@ -913,7 +913,7 @@ s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw)
if (phy->wait_for_link) {
hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n");
- ret_val = e1000_phy_has_link_generic(hw,
+ ret_val = e1000e_phy_has_link_generic(hw,
PHY_FORCE_LIMIT,
100000,
&link);
@@ -924,7 +924,7 @@ s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw)
hw_dbg(hw, "Link taking longer than expected.\n");
/* Try once more */
- ret_val = e1000_phy_has_link_generic(hw,
+ ret_val = e1000e_phy_has_link_generic(hw,
PHY_FORCE_LIMIT,
100000,
&link);
@@ -936,7 +936,7 @@ s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw)
}
/**
- * e1000_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
+ * e1000e_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
* @hw: pointer to the HW structure
*
* Calls the PHY setup function to force speed and duplex. Clears the
@@ -945,7 +945,7 @@ s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw)
* After reset, TX_CLK and CRS on TX must be set. Return successful upon
* successful completion, else return corresponding error code.
**/
-s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw)
+s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -970,7 +970,7 @@ s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw)
if (ret_val)
return ret_val;
- e1000_phy_force_speed_duplex_setup(hw, &phy_data);
+ e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
/* Reset the phy to commit changes. */
phy_data |= MII_CR_RESET;
@@ -984,7 +984,7 @@ s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw)
if (phy->wait_for_link) {
hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n");
- ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
100000, &link);
if (ret_val)
return ret_val;
@@ -996,13 +996,13 @@ s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw)
ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT, 0x001d);
if (ret_val)
return ret_val;
- ret_val = e1000_phy_reset_dsp(hw);
+ ret_val = e1000e_phy_reset_dsp(hw);
if (ret_val)
return ret_val;
}
/* Try once more */
- ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
100000, &link);
if (ret_val)
return ret_val;
@@ -1035,7 +1035,7 @@ s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw)
}
/**
- * e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
+ * e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
* @hw: pointer to the HW structure
* @phy_ctrl: pointer to current value of PHY_CONTROL
*
@@ -1046,7 +1046,7 @@ s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw)
* caller must write to the PHY_CONTROL register for these settings to
* take affect.
**/
-void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
+void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
{
struct e1000_mac_info *mac = &hw->mac;
u32 ctrl;
@@ -1089,13 +1089,13 @@ void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
hw_dbg(hw, "Forcing 10mb\n");
}
- e1000_config_collision_dist(hw);
+ e1000e_config_collision_dist(hw);
ew32(CTRL, ctrl);
}
/**
- * e1000_set_d3_lplu_state - Sets low power link up state for D3
+ * e1000e_set_d3_lplu_state - Sets low power link up state for D3
* @hw: pointer to the HW structure
* @active: boolean used to enable/disable lplu
*
@@ -1108,7 +1108,7 @@ void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
* During driver activity, SmartSpeed should be enabled so performance is
* maintained.
**/
-s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -1173,14 +1173,14 @@ s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
}
/**
- * e1000_check_downshift - Checks whether a downshift in speed occured
+ * e1000e_check_downshift - Checks whether a downshift in speed occured
* @hw: pointer to the HW structure
*
* Success returns 0, Failure returns 1
*
* A downshift is detected by querying the PHY link health.
**/
-s32 e1000_check_downshift(struct e1000_hw *hw)
+s32 e1000e_check_downshift(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -1310,7 +1310,7 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw)
}
/**
- * e1000_phy_has_link_generic - Polls PHY for link
+ * e1000e_phy_has_link_generic - Polls PHY for link
* @hw: pointer to the HW structure
* @iterations: number of times to poll for link
* @usec_interval: delay between polling attempts
@@ -1318,7 +1318,7 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw)
*
* Polls the PHY status register for link, 'iterations' number of times.
**/
-s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
+s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
u32 usec_interval, bool *success)
{
s32 ret_val;
@@ -1349,7 +1349,7 @@ s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
}
/**
- * e1000_get_cable_length_m88 - Determine cable length for m88 PHY
+ * e1000e_get_cable_length_m88 - Determine cable length for m88 PHY
* @hw: pointer to the HW structure
*
* Reads the PHY specific status register to retrieve the cable length
@@ -1363,7 +1363,7 @@ s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
* 3 110 - 140 meters
* 4 > 140 meters
**/
-s32 e1000_get_cable_length_m88(struct e1000_hw *hw)
+s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -1384,7 +1384,7 @@ s32 e1000_get_cable_length_m88(struct e1000_hw *hw)
}
/**
- * e1000_get_cable_length_igp_2 - Determine cable length for igp2 PHY
+ * e1000e_get_cable_length_igp_2 - Determine cable length for igp2 PHY
* @hw: pointer to the HW structure
*
* The automatic gain control (agc) normalizes the amplitude of the
@@ -1394,7 +1394,7 @@ s32 e1000_get_cable_length_m88(struct e1000_hw *hw)
* into a lookup table to obtain the approximate cable length
* for each channel.
**/
-s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw)
+s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -1451,7 +1451,7 @@ s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw)
}
/**
- * e1000_get_phy_info_m88 - Retrieve PHY information
+ * e1000e_get_phy_info_m88 - Retrieve PHY information
* @hw: pointer to the HW structure
*
* Valid for only copper links. Read the PHY status register (sticky read)
@@ -1460,7 +1460,7 @@ s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw)
* special status register to determine MDI/MDIx and current speed. If
* speed is 1000, then determine cable length, local and remote receiver.
**/
-s32 e1000_get_phy_info_m88(struct e1000_hw *hw)
+s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -1472,7 +1472,7 @@ s32 e1000_get_phy_info_m88(struct e1000_hw *hw)
return -E1000_ERR_CONFIG;
}
- ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
if (ret_val)
return ret_val;
@@ -1525,7 +1525,7 @@ s32 e1000_get_phy_info_m88(struct e1000_hw *hw)
}
/**
- * e1000_get_phy_info_igp - Retrieve igp PHY information
+ * e1000e_get_phy_info_igp - Retrieve igp PHY information
* @hw: pointer to the HW structure
*
* Read PHY status to determine if link is up. If link is up, then
@@ -1533,14 +1533,14 @@ s32 e1000_get_phy_info_m88(struct e1000_hw *hw)
* PHY port status to determine MDI/MDIx and speed. Based on the speed,
* determine on the cable length, local and remote receiver.
**/
-s32 e1000_get_phy_info_igp(struct e1000_hw *hw)
+s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
u16 data;
bool link;
- ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
if (ret_val)
return ret_val;
@@ -1588,13 +1588,13 @@ s32 e1000_get_phy_info_igp(struct e1000_hw *hw)
}
/**
- * e1000_phy_sw_reset - PHY software reset
+ * e1000e_phy_sw_reset - PHY software reset
* @hw: pointer to the HW structure
*
* Does a software reset of the PHY by reading the PHY control register and
* setting/write the control register reset bit to the PHY.
**/
-s32 e1000_phy_sw_reset(struct e1000_hw *hw)
+s32 e1000e_phy_sw_reset(struct e1000_hw *hw)
{
s32 ret_val;
u16 phy_ctrl;
@@ -1614,7 +1614,7 @@ s32 e1000_phy_sw_reset(struct e1000_hw *hw)
}
/**
- * e1000_phy_hw_reset_generic - PHY hardware reset
+ * e1000e_phy_hw_reset_generic - PHY hardware reset
* @hw: pointer to the HW structure
*
* Verify the reset block is not blocking us from resetting. Acquire
@@ -1622,7 +1622,7 @@ s32 e1000_phy_sw_reset(struct e1000_hw *hw)
* bit in the PHY. Wait the appropriate delay time for the device to
* reset and relase the semaphore (if necessary).
**/
-s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw)
+s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
@@ -1653,13 +1653,13 @@ s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw)
}
/**
- * e1000_get_cfg_done - Generic configuration done
+ * e1000e_get_cfg_done - Generic configuration done
* @hw: pointer to the HW structure
*
* Generic function to wait 10 milli-seconds for configuration to complete
* and return success.
**/
-s32 e1000_get_cfg_done(struct e1000_hw *hw)
+s32 e1000e_get_cfg_done(struct e1000_hw *hw)
{
mdelay(10);
return 0;
@@ -1698,12 +1698,12 @@ static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
}
/**
- * e1000_get_phy_type_from_id - Get PHY type from id
+ * e1000e_get_phy_type_from_id - Get PHY type from id
* @phy_id: phy_id read from the phy
*
* Returns the phy type from the id.
**/
-enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id)
+enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
{
enum e1000_phy_type phy_type = e1000_phy_unknown;
@@ -1736,13 +1736,13 @@ enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id)
}
/**
- * e1000_commit_phy - Soft PHY reset
+ * e1000e_commit_phy - Soft PHY reset
* @hw: pointer to the HW structure
*
* Performs a soft PHY reset on those that apply. This is a function pointer
* entry point called by drivers.
**/
-s32 e1000_commit_phy(struct e1000_hw *hw)
+s32 e1000e_commit_phy(struct e1000_hw *hw)
{
if (hw->phy.ops.commit_phy)
return hw->phy.ops.commit_phy(hw);
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists