| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200708102105.l7AL5OpY008986@imap1.linux-foundation.org>
Date: Fri, 10 Aug 2007 14:05:24 -0700
From: akpm@...ux-foundation.org
To: jeff@...zik.org
Cc: netdev@...r.kernel.org, akpm@...ux-foundation.org, rjw@...k.pl,
grundler@...isc-linux.org, kyle@...artin.ca
Subject: [patch 14/18] uli526x: add suspend and resume routines
From: Rafael J. Wysocki <rjw@...k.pl>
Add suspend/resume support to the uli526x network driver (tested on x86_64,
with "Ethernet controller: ALi Corporation M5263 Ethernet Controller, rev 40").
This patch is based on the suspend/resume code in the tg3 driver.
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
Acked-by: Grant Grundler <grundler@...isc-linux.org>
Cc: Kyle McMartin <kyle@...artin.ca>
Signed-off-by: Andrew Morton <akpm@...ux-foundation.org>
---
drivers/net/tulip/uli526x.c | 109 ++++++++++++++++++++++++++++++++--
1 files changed, 103 insertions(+), 6 deletions(-)
diff -puN drivers/net/tulip/uli526x.c~uli526x-add-suspend-and-resume-routines drivers/net/tulip/uli526x.c
--- a/drivers/net/tulip/uli526x.c~uli526x-add-suspend-and-resume-routines
+++ a/drivers/net/tulip/uli526x.c
@@ -1110,19 +1110,15 @@ static void uli526x_timer(unsigned long
/*
- * Dynamic reset the ULI526X board
* Stop ULI526X board
* Free Tx/Rx allocated memory
- * Reset ULI526X board
- * Re-initialize ULI526X board
+ * Init system variable
*/
-static void uli526x_dynamic_reset(struct net_device *dev)
+static void uli526x_reset_prepare(struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
- ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
-
/* Sopt MAC controller */
db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
update_cr6(db->cr6_data, dev->base_addr);
@@ -1141,6 +1137,22 @@ static void uli526x_dynamic_reset(struct
db->link_failed = 1;
db->init=1;
db->wait_reset = 0;
+}
+
+
+/*
+ * Dynamic reset the ULI526X board
+ * Stop ULI526X board
+ * Free Tx/Rx allocated memory
+ * Reset ULI526X board
+ * Re-initialize ULI526X board
+ */
+
+static void uli526x_dynamic_reset(struct net_device *dev)
+{
+ ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
+
+ uli526x_reset_prepare(dev);
/* Re-initialize ULI526X board */
uli526x_init(dev);
@@ -1150,6 +1162,89 @@ static void uli526x_dynamic_reset(struct
}
+#ifdef CONFIG_PM_SLEEP
+
+/*
+ * Suspend the interface.
+ */
+
+static int uli526x_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ pci_power_t power_state;
+ int err;
+
+ ULI526X_DBUG(0, "uli526x_suspend", 0);
+
+ if (!(dev && netdev_priv(dev)))
+ return 0;
+
+ pci_save_state(pdev);
+
+ if (!netif_running(dev))
+ return 0;
+
+ netif_device_detach(dev);
+ uli526x_reset_prepare(dev);
+
+ power_state = pci_choose_state(pdev, state);
+ pci_enable_wake(pdev, power_state, 0);
+ err = pci_set_power_state(pdev, power_state);
+ if (err) {
+ netif_device_attach(dev);
+ /* Re-initialize ULI526X board */
+ uli526x_init(dev);
+ /* Restart upper layer interface */
+ netif_wake_queue(dev);
+ }
+
+ return err;
+}
+
+/*
+ * Resume the interface.
+ */
+
+static int uli526x_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct uli526x_board_info *db = netdev_priv(dev);
+ int err;
+
+ ULI526X_DBUG(0, "uli526x_resume", 0);
+
+ if (!(dev && db))
+ return 0;
+
+ pci_restore_state(pdev);
+
+ if (!netif_running(dev))
+ return 0;
+
+ err = pci_set_power_state(pdev, PCI_D0);
+ if (err) {
+ printk(KERN_WARNING "%s: Could not put device into D0\n",
+ dev->name);
+ return err;
+ }
+
+ netif_device_attach(dev);
+ /* Re-initialize ULI526X board */
+ uli526x_init(dev);
+ /* Restart upper layer interface */
+ netif_wake_queue(dev);
+
+ return 0;
+}
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define uli526x_suspend NULL
+#define uli526x_resume NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
+
/*
* free all allocated rx buffer
*/
@@ -1689,6 +1784,8 @@ static struct pci_driver uli526x_driver
.id_table = uli526x_pci_tbl,
.probe = uli526x_init_one,
.remove = __devexit_p(uli526x_remove_one),
+ .suspend = uli526x_suspend,
+ .resume = uli526x_resume,
};
MODULE_AUTHOR("Peer Chen, peer.chen@....com.tw");
_
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists