Linux version 2.6.23-rc5-amd64 (Debian 2.6.23~rc5-1~experimental.1~snapshot.9462) (waldi@debian.org) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14+1)) #1 SMP Thu Sep 6 06:18:52 UTC 2007 Command line: root=/dev/sda6 ro quiet vga=791 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ef90000 (usable) BIOS-e820: 000000007ef90000 - 000000007ef9e000 (ACPI data) BIOS-e820: 000000007ef9e000 - 000000007efe0000 (ACPI NVS) BIOS-e820: 000000007efe0000 - 000000007f000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 158) 0 entries of 3200 used Entering add_active_range(0, 256, 520080) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000FAD70, 0024 (r2 ACPIAM) ACPI: XSDT 7EF90100, 006C (r1 NEC 5000730 MSFT 97) ACPI: FACP 7EF90290, 00F4 (r3 MSTEST OEMFACP 5000730 MSFT 97) ACPI: DSDT 7EF905C0, 9C85 (r1 A0579 A0579000 0 INTL 20060113) ACPI: FACS 7EF9E000, 0040 ACPI: APIC 7EF90390, 006C (r1 MSTEST OEMAPIC 5000730 MSFT 97) ACPI: MCFG 7EF90400, 003C (r1 MSTEST OEMMCFG 5000730 MSFT 97) ACPI: SLIC 7EF90440, 0176 (r1 NEC 5000730 MSFT 97) ACPI: OEMB 7EF9E040, 007B (r1 MSTEST AMI_OEM 5000730 MSFT 97) ACPI: HPET 7EF9A250, 0038 (r1 MSTEST OEMHPET 5000730 MSFT 97) ACPI: GSCI 7EF9E0C0, 2024 (r1 MSTEST GMCHSCI 5000730 MSFT 97) ACPI: SSDT 7EFA00F0, 01BF (r1 AMI CPU1PM 1 INTL 20060113) ACPI: SSDT 7EFA02B0, 0133 (r1 AMI CPU2PM 1 INTL 20060113) No NUMA configuration found Faking a node at 0000000000000000-000000007ef90000 Entering add_active_range(0, 0, 158) 0 entries of 3200 used Entering add_active_range(0, 256, 520080) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007ef90000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 158 0: 256 -> 520080 On node 0 totalpages: 519982 DMA zone: 56 pages used for memmap DMA zone: 1044 pages reserved DMA zone: 2898 pages, LIFO batch:0 DMA32 zone: 7054 pages used for memmap DMA32 zone: 508930 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a202 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7f000000:7fe00000) SMP: Allowing 4 CPUs, 2 hotplug CPUs PERCPU: Allocating 35176 bytes of per cpu data Built 1 zonelists in Node order. Total pages: 511828 Policy zone: DMA32 Kernel command line: root=/dev/sda6 ro quiet vga=791 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 time.c: Detected 2399.997 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2041096k/2080320k available (2066k kernel code, 38832k reserved, 977k data, 304k init) Calibrating delay using timer specific routine.. 4803.34 BogoMIPS (lpj=9606690) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 16666629 Detected 16.666 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4800.03 BogoMIPS (lpj=9600060) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - CD, should be C4 [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: ACPI device : hid PNP0A08 pnp: ACPI device : hid PNP0C01 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0700 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0103 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0F03 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C01 pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:01' and the driver 'system' pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved pnp: match found with the PnP device '00:08' and the driver 'system' pnp: 00:08: ioport range 0x290-0x297 has been reserved pnp: match found with the PnP device '00:09' and the driver 'system' pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved pnp: 00:09: iomem range 0xff9fa000-0xff9fafff has been reserved pnp: 00:09: iomem range 0xfff00000-0xfffffffe could not be reserved pnp: match found with the PnP device '00:0b' and the driver 'system' pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved pnp: match found with the PnP device '00:0e' and the driver 'system' pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved pnp: match found with the PnP device '00:0f' and the driver 'system' pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0f: iomem range 0xc0000-0xcffff has been reserved pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0f: iomem range 0x100000-0x7effffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 8000-afff MEM window: ff700000-ff7fffff PREFETCH window: bfe00000-dfdfffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: dfe00000-dfefffff PCI: Bridge: 0000:00:1c.4 IO window: b000-bfff MEM window: ff800000-ff8fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: c000-cfff MEM window: ff900000-ff9fffff PREFETCH window: 80000000-800fffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5950k freed audit: initializing netlink socket (disabled) audit(1189181505.780:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000b00000, using 3072k, total 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:06' and the driver 'serial' 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:0c' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:0d' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 304k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI Exception (processor_core-0797): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0797): AE_NOT_FOUND, Processor Device is not present [20070126] USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered Floppy drive(s): fd0 is 1.44M SCSI subsystem initialized libata version 2.21 loaded. FDC 0 is a post-1991 82077 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Unable to reserve mem region #1:4000@ff9f8000 for device 0000:04:04.0 skge 0000:04:04.0: cannot obtain PCI resources ACPI: PCI interrupt for device 0000:04:04.0 disabled skge: probe of 0000:04:04.0 failed with error -16 ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 21 (level, low) -> IRQ 21 firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.10 ahci 0000:00:1f.2: version 2.3 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 firewire_core: created new fw device fw0 (0 config rom retries, S400) ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 cmd 0xffffc20000ac2900 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1276 ata2: SATA max UDMA/133 cmd 0xffffc20000ac2980 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1276 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 cmd 0xffffc20000ac2b00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1276 ata6: SATA max UDMA/133 cmd 0xffffc20000ac2b80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1276 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7 ata1.00: 781422768 sectors, multi 0: LBA48 NCQ (not used) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H30N, 1.01, max UDMA/100 ata2.00: configured for UDMA/100 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H30N 1.01 PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xffaff000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part PCI: Setting latency timer of device 0000:02:00.0 to 64 scsi6 : ahci scsi7 : ahci ata7: SATA max UDMA/133 cmd 0xffffc20000ac4100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 ata8: SATA max UDMA/133 cmd 0xffffc20000ac4180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffafec00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk JMB363: IDE controller at PCI slot 0000:02:00.1 PCI: Enabling device 0000:02:00.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17 JMB363: chipset revision 2 JMB363: 100% native mode on irq 17 PCI: Setting latency timer of device 0000:02:00.1 to 64 ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 hdb: WDC WD400BB-00AUA1, ATA DISK drive hdb: selected mode 0x45 ide0 at 0xbc00-0xbc07,0xb882 on irq 17 Probing IDE interface ide1... hdb: max request size: 128KiB hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdb: cache flushes not supported hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 > kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input1 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... Linux video capture interface: v2.00 PCI: Enabling device 0000:00:1f.3 (0001 -> 0003) ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18 logips2pp: Detected unknown logitech mouse model 95 saa7146: register extension 'dvb'. ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 22 saa7146: found saa7146 @ mem ffffc20000ace800 (revision 1, irq 22) (0x13c2,0x0003). DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X) adapter has MAC addr = 00:d0:5c:22:68:cc dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622 dvb-ttpci: firmware @ card 0 supports CI link layer interface input: ImExPS/2 Logitech Explorer Mouse as /class/input/input4 dvb-ttpci: adac type set to 0 @ card 0 saa7146_vv: saa7146 (0): registered device video0 [v4l2] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2] DVB: registering frontend 0 (ST STV0299 DVB-S)... input: DVB on-card IR receiver as /class/input/input5 dvb-ttpci: found av7110-0. EXT3 FS on sda6, internal journal device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 10 lo: Disabled Privacy Extensions pnp: the driver 'parport_pc' has been registered lp: driver loaded but no devices found ppdev: user-space parallel port driver [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.28.0 20060524 on minor 0 [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs