| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20070910063626.2300.75144.sendpatchset@clockwork.opensource.se>
Date: Mon, 10 Sep 2007 15:36:26 +0900
From: Magnus Damm <magnus.damm@...il.com>
To: netdev@...r.kernel.org
Cc: Magnus Damm <magnus.damm@...il.com>, lethal@...ux-sh.org,
jgarzik@...ox.com, ben-linux@...ff.org
Subject: sh: add support for ax88796 and 93cx6 to highlander boards
sh: add support for ax88796 and 93cx6 to highlander boards
This patch adds eeprom support to the ax88796 driver together with a platform
device for highlander boards. The 93cx6 driver is hooked up to the ax88796
driver and is used to read out the mac address from the on board eeprom. The
pin configuration used to connect the eeprom to the ax88796 is the same one
as pointed out by the ax88796 datasheet. So it's likely that we can reuse
this code for other boards as well.
Signed-off-by: Magnus Damm <damm@...l.co.jp>
---
arch/sh/boards/renesas/r7780rp/setup.c | 40 ++++++++++++++++++++++++++
drivers/net/Kconfig | 9 +++++
drivers/net/ax88796.c | 49 ++++++++++++++++++++++++++++++++
include/linux/eeprom_93cx6.h | 3 +
include/net/ax88796.h | 1
5 files changed, 100 insertions(+), 2 deletions(-)
--- 0004/arch/sh/boards/renesas/r7780rp/setup.c
+++ work/arch/sh/boards/renesas/r7780rp/setup.c 2007-09-06 15:35:49.000000000 +0900
@@ -21,6 +21,7 @@
#include <asm/clock.h>
#include <asm/heartbeat.h>
#include <asm/io.h>
+#include <net/ax88796.h>
static struct resource r8a66597_usb_host_resources[] = {
[0] = {
@@ -136,11 +137,50 @@ static struct platform_device heartbeat_
.resource = heartbeat_resources,
};
+static struct ax_plat_data ax88796_platdata = {
+ .flags = AXFLG_HAS_93CX6,
+ .wordlength = 2,
+ .dcr_val = 0x1,
+ .rcr_val = 0x40,
+};
+
+static struct resource ax88796_resources[] = {
+ {
+#ifdef CONFIG_SH_R7780RP
+ .start = 0xa5800400,
+ .end = 0xa5800400 + (0x20 * 0x2) - 1,
+#else
+ .start = 0xa4100400,
+ .end = 0xa4100400 + (0x20 * 0x2) - 1,
+#endif
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_AX88796,
+ .end = IRQ_AX88796,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ax88796_device = {
+ .name = "ax88796",
+ .id = 0,
+
+ .dev = {
+ .platform_data = &ax88796_platdata,
+ },
+
+ .num_resources = ARRAY_SIZE(ax88796_resources),
+ .resource = ax88796_resources,
+};
+
+
static struct platform_device *r7780rp_devices[] __initdata = {
&r8a66597_usb_host_device,
&m66592_usb_peripheral_device,
&cf_ide_device,
&heartbeat_device,
+ &ax88796_device,
};
static int __init r7780rp_devices_setup(void)
--- 0001/drivers/net/Kconfig
+++ work/drivers/net/Kconfig 2007-09-06 15:35:41.000000000 +0900
@@ -218,13 +218,20 @@ source "drivers/net/arm/Kconfig"
config AX88796
tristate "ASIX AX88796 NE2000 clone support"
- depends on ARM || MIPS
+ depends on ARM || MIPS || SUPERH
select CRC32
select MII
help
AX88796 driver, using platform bus to provide
chip detection and resources
+config AX88796_93CX6
+ bool "ASIX AX88796 external 93CX6 eeprom support"
+ depends on AX88796
+ select EEPROM_93CX6
+ help
+ Select this if your platform comes with an external 93CX6 eeprom.
+
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on PPC_PMAC && PPC32
--- 0001/drivers/net/ax88796.c
+++ work/drivers/net/ax88796.c 2007-09-06 15:35:41.000000000 +0900
@@ -24,6 +24,7 @@
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
+#include <linux/eeprom_93cx6.h>
#include <net/ax88796.h>
@@ -582,6 +583,37 @@ static const struct ethtool_ops ax_ethto
.get_link = ax_get_link,
};
+#ifdef CONFIG_AX88796_93CX6
+static void ax_eeprom_register_read(struct eeprom_93cx6 *eeprom)
+{
+ struct ei_device *ei_local = eeprom->data;
+ u8 reg = ei_inb(ei_local->mem + AX_MEMR);
+
+ eeprom->reg_data_in = reg & AX_MEMR_EEI;
+ eeprom->reg_data_out = reg & AX_MEMR_EEO; /* Input pin */
+ eeprom->reg_data_clock = reg & AX_MEMR_EECLK;
+ eeprom->reg_chip_select = reg & AX_MEMR_EECS;
+}
+
+static void ax_eeprom_register_write(struct eeprom_93cx6 *eeprom)
+{
+ struct ei_device *ei_local = eeprom->data;
+ u8 reg = ei_inb(ei_local->mem + AX_MEMR);
+
+ reg &= ~(AX_MEMR_EEI | AX_MEMR_EECLK | AX_MEMR_EECS);
+
+ if (eeprom->reg_data_in)
+ reg |= AX_MEMR_EEI;
+ if (eeprom->reg_data_clock)
+ reg |= AX_MEMR_EECLK;
+ if (eeprom->reg_chip_select)
+ reg |= AX_MEMR_EECS;
+
+ ei_outb(reg, ei_local->mem + AX_MEMR);
+ udelay(10);
+}
+#endif
+
/* setup code */
static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
@@ -640,6 +672,23 @@ static int ax_init_dev(struct net_device
memcpy(dev->dev_addr, SA_prom, 6);
}
+#ifdef CONFIG_AX88796_93CX6
+ if (first_init && ax->plat->flags & AXFLG_HAS_93CX6) {
+ unsigned char mac_addr[6];
+ struct eeprom_93cx6 eeprom;
+
+ eeprom.data = ei_local;
+ eeprom.register_read = ax_eeprom_register_read;
+ eeprom.register_write = ax_eeprom_register_write;
+ eeprom.width = PCI_EEPROM_WIDTH_93C56;
+
+ eeprom_93cx6_multiread(&eeprom, 0,
+ (__le16 __force *)mac_addr,
+ sizeof(mac_addr) >> 1);
+
+ memcpy(dev->dev_addr, mac_addr, 6);
+ }
+#endif
if (ax->plat->wordlength == 2) {
/* We must set the 8390 for word mode. */
ei_outb(ax->plat->dcr_val, ei_local->mem + EN0_DCFG);
--- 0001/include/linux/eeprom_93cx6.h
+++ work/include/linux/eeprom_93cx6.h 2007-09-06 15:35:41.000000000 +0900
@@ -21,13 +21,14 @@
/*
Module: eeprom_93cx6
Abstract: EEPROM reader datastructures for 93cx6 chipsets.
- Supported chipsets: 93c46 & 93c66.
+ Supported chipsets: 93c46, 93c56 and 93c66.
*/
/*
* EEPROM operation defines.
*/
#define PCI_EEPROM_WIDTH_93C46 6
+#define PCI_EEPROM_WIDTH_93C56 8
#define PCI_EEPROM_WIDTH_93C66 8
#define PCI_EEPROM_WIDTH_OPCODE 3
#define PCI_EEPROM_WRITE_OPCODE 0x05
--- 0001/include/net/ax88796.h
+++ work/include/net/ax88796.h 2007-09-06 15:35:41.000000000 +0900
@@ -14,6 +14,7 @@
#define AXFLG_HAS_EEPROM (1<<0)
#define AXFLG_MAC_FROMDEV (1<<1) /* device already has MAC */
+#define AXFLG_HAS_93CX6 (1<<2) /* use eeprom_93cx6 driver */
struct ax_plat_data {
unsigned int flags;
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists