| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <11896151802410-git-send-email-Emilian.Medve@Freescale.com>
Date: Wed, 12 Sep 2007 11:39:40 -0500
From: Emil Medve <Emilian.Medve@...escale.com>
To: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
i2c@...sensors.org, linux-omap-open-source@...ux.omap.com
Cc: Emil Medve <Emilian.Medve@...escale.com>
Subject: [PATCH v3] Make the pr_*() family of macros in kernel.h complete
Other/Some pr_*() macros are already defined in kernel.h, but pr_err() was defined
multiple times in several other places
Signed-off-by: Emil Medve <Emilian.Medve@...escale.com>
---
I'm writing a driver and I've been using the pr_*() macros from kernel.h and I
was surprised not to find there pr_err() but defined multiple times (in four
different files). I didn't want to define it yet one more time so I did this
cleanup
As per community request/suggestion, I added the rest of the missing pr_*()
macros to complete the family. The names of the macros are based on the KERN_*
loglevel names and are macthing the naming convention of the dev_*() print
macros from device.h. The macros are defined in the ascending order of the
loglevel
This patch is against Linus' tree (577107e8e4cf9f6f4f5ef8350ac9a8faa6c3796d)
linux-2.6> scripts/checkpatch.pl 0001-Make-the-pr_-family-of-macros-in-kernel.h-complet.patch
Your patch has no obvious style problems and is ready for submission.
drivers/i2c/chips/menelaus.c | 10 ++++------
drivers/net/spider_net.h | 3 ---
drivers/video/omap/lcd_h3.c | 6 ++----
drivers/video/omap/lcd_inn1610.c | 6 ++----
include/linux/kernel.h | 22 +++++++++++++++++-----
5 files changed, 25 insertions(+), 22 deletions(-)
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index d9c92c5..66436ba 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -49,8 +49,6 @@
#define DRIVER_NAME "menelaus"
-#define pr_err(fmt, arg...) printk(KERN_ERR DRIVER_NAME ": ", ## arg);
-
#define MENELAUS_I2C_ADDRESS 0x72
#define MENELAUS_REV 0x01
@@ -155,7 +153,7 @@ static int menelaus_write_reg(int reg, u8 value)
int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
if (val < 0) {
- pr_err("write error");
+ pr_err(DRIVER_NAME ": write error");
return val;
}
@@ -167,7 +165,7 @@ static int menelaus_read_reg(int reg)
int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
if (val < 0)
- pr_err("read error");
+ pr_err(DRIVER_NAME ": read error");
return val;
}
@@ -1177,7 +1175,7 @@ static int menelaus_probe(struct i2c_client *client)
/* If a true probe check the device */
rev = menelaus_read_reg(MENELAUS_REV);
if (rev < 0) {
- pr_err("device not found");
+ pr_err(DRIVER_NAME ": device not found");
err = -ENODEV;
goto fail1;
}
@@ -1258,7 +1256,7 @@ static int __init menelaus_init(void)
res = i2c_add_driver(&menelaus_i2c_driver);
if (res < 0) {
- pr_err("driver registration failed\n");
+ pr_err(DRIVER_NAME ": driver registration failed\n");
return res;
}
diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index dbbdb8c..c67b11d 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -493,7 +493,4 @@ struct spider_net_card {
struct spider_net_descr darray[0];
};
-#define pr_err(fmt,arg...) \
- printk(KERN_ERR fmt ,##arg)
-
#endif
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 51807b4..c604d93 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -28,8 +28,6 @@
#define MODULE_NAME "omapfb-lcd_h3"
-#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
-
static int h3_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
{
return 0;
@@ -48,7 +46,7 @@ static int h3_panel_enable(struct lcd_panel *panel)
if (!r)
r = tps65010_set_gpio_out_value(GPIO2, HIGH);
if (r)
- pr_err("Unable to turn on LCD panel\n");
+ pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");
return r;
}
@@ -62,7 +60,7 @@ static void h3_panel_disable(struct lcd_panel *panel)
if (!r)
tps65010_set_gpio_out_value(GPIO2, LOW);
if (r)
- pr_err("Unable to turn off LCD panel\n");
+ pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
}
static unsigned long h3_panel_get_caps(struct lcd_panel *panel)
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 95604ca..5ef119c 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -27,20 +27,18 @@
#define MODULE_NAME "omapfb-lcd_h3"
-#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
-
static int innovator1610_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
int r = 0;
if (omap_request_gpio(14)) {
- pr_err("can't request GPIO 14\n");
+ pr_err(MODULE_NAME ": can't request GPIO 14\n");
r = -1;
goto exit;
}
if (omap_request_gpio(15)) {
- pr_err("can't request GPIO 15\n");
+ pr_err(MODULE_NAME ": can't request GPIO 15\n");
omap_free_gpio(14);
r = -1;
goto exit;
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 47160fe..166a822 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -230,10 +230,25 @@ extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
const void *buf, size_t len);
#define hex_asc(x) "0123456789abcdef"[x]
+#define pr_emerg(fmt, arg...) \
+ printk(KERN_EMERG fmt, ##arg)
+#define pr_alert(fmt, arg...) \
+ printk(KERN_ALERT fmt, ##arg)
+#define pr_crit(fmt, arg...) \
+ printk(KERN_CRIT fmt, ##arg)
+#define pr_err(fmt, arg...) \
+ printk(KERN_ERR fmt, ##arg)
+#define pr_warning(fmt, arg...) \
+ printk(KERN_WARNING fmt, ##arg)
+#define pr_notice(fmt, arg...) \
+ printk(KERN_NOTICE fmt, ##arg)
+#define pr_info(fmt, arg...) \
+ printk(KERN_INFO fmt, ##arg)
+
#ifdef DEBUG
/* If you are writing a driver, please use dev_dbg instead */
-#define pr_debug(fmt,arg...) \
- printk(KERN_DEBUG fmt,##arg)
+#define pr_debug(fmt, arg...) \
+ printk(KERN_DEBUG fmt, ##arg)
#else
static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char * fmt, ...)
{
@@ -241,9 +256,6 @@ static inline int __attribute__ ((format (printf, 1, 2))) pr_debug(const char *
}
#endif
-#define pr_info(fmt,arg...) \
- printk(KERN_INFO fmt,##arg)
-
/*
* Display an IP address in readable format.
*/
--
1.5.3.GIT
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists