| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <598D5675D34BE349929AF5EDE9B03E270155578C@az33exm24.fsl.freescale.net>
Date: Fri, 14 Sep 2007 06:27:04 -0700
From: "Medve Emilian-EMMEDVE1" <Emilian.Medve@...escale.com>
To: <akpm@...ux-foundation.org>
Cc: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
<i2c@...sensors.org>, <linux-omap-open-source@...ux.omap.com>
Subject: RE: [PATCH v3] Make the pr_*() family of macros in kernel.h complete
Hello Andrew,
I realize this e-mail might be nuisance and time waster for you but I'm
in need of advice. I apologize in advance for any commonsense cultural
conventions I'm breaking.
I sent the below patch to four e-mail lists and it lead to orthogonal
conversations about how the entire kernel logging system/mechanisms need
to be re-written and thus such incremental improvements as these get out
of focus...
In this case I started needing pr_err() and discovered that is defined
already four times but not with global visibility as some other pr_*()
from kernel.h (a subset of the entire family). I chose not to define it
yet the fifth time but clean up the existing definitions and complete
the family. For some reason it didn't go through even though I had some
positive feedback. Now it seems I'm encouraged to really define the
pr_err() for the fifth time... Not quite sure what to do...
Cheers,
Emil.
> -----Original Message-----
> From: Medve Emilian-EMMEDVE1
> Sent: Wednesday, September 12, 2007 11:40 AM
> To: linux-kernel@...r.kernel.org; netdev@...r.kernel.org;
> i2c@...sensors.org; linux-omap-open-source@...ux.omap.com
> Cc: Medve Emilian-EMMEDVE1
> Subject: [PATCH v3] Make the pr_*() family of macros in
> kernel.h complete
>
> Other/Some pr_*() macros are already defined in kernel.h, but
> pr_err() was defined
> multiple times in several other places
>
> Signed-off-by: Emil Medve <Emilian.Medve@...escale.com>
> ---
>
> I'm writing a driver and I've been using the pr_*() macros
> from kernel.h and I
> was surprised not to find there pr_err() but defined multiple
> times (in four
> different files). I didn't want to define it yet one more
> time so I did this
> cleanup
>
> As per community request/suggestion, I added the rest of the
> missing pr_*()
> macros to complete the family. The names of the macros are
> based on the KERN_*
> loglevel names and are macthing the naming convention of the
> dev_*() print
> macros from device.h. The macros are defined in the ascending
> order of the
> loglevel
>
> This patch is against Linus' tree
> (577107e8e4cf9f6f4f5ef8350ac9a8faa6c3796d)
>
> linux-2.6> scripts/checkpatch.pl
> 0001-Make-the-pr_-family-of-macros-in-kernel.h-complet.patch
> Your patch has no obvious style problems and is ready for submission.
>
> drivers/i2c/chips/menelaus.c | 10 ++++------
> drivers/net/spider_net.h | 3 ---
> drivers/video/omap/lcd_h3.c | 6 ++----
> drivers/video/omap/lcd_inn1610.c | 6 ++----
> include/linux/kernel.h | 22 +++++++++++++++++-----
> 5 files changed, 25 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/i2c/chips/menelaus.c
> b/drivers/i2c/chips/menelaus.c
> index d9c92c5..66436ba 100644
> --- a/drivers/i2c/chips/menelaus.c
> +++ b/drivers/i2c/chips/menelaus.c
> @@ -49,8 +49,6 @@
>
> #define DRIVER_NAME "menelaus"
>
> -#define pr_err(fmt, arg...) printk(KERN_ERR DRIVER_NAME ":
> ", ## arg);
> -
> #define MENELAUS_I2C_ADDRESS 0x72
>
> #define MENELAUS_REV 0x01
> @@ -155,7 +153,7 @@ static int menelaus_write_reg(int reg, u8 value)
> int val =
> i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
>
> if (val < 0) {
> - pr_err("write error");
> + pr_err(DRIVER_NAME ": write error");
> return val;
> }
>
> @@ -167,7 +165,7 @@ static int menelaus_read_reg(int reg)
> int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
>
> if (val < 0)
> - pr_err("read error");
> + pr_err(DRIVER_NAME ": read error");
>
> return val;
> }
> @@ -1177,7 +1175,7 @@ static int menelaus_probe(struct
> i2c_client *client)
> /* If a true probe check the device */
> rev = menelaus_read_reg(MENELAUS_REV);
> if (rev < 0) {
> - pr_err("device not found");
> + pr_err(DRIVER_NAME ": device not found");
> err = -ENODEV;
> goto fail1;
> }
> @@ -1258,7 +1256,7 @@ static int __init menelaus_init(void)
>
> res = i2c_add_driver(&menelaus_i2c_driver);
> if (res < 0) {
> - pr_err("driver registration failed\n");
> + pr_err(DRIVER_NAME ": driver registration failed\n");
> return res;
> }
>
> diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
> index dbbdb8c..c67b11d 100644
> --- a/drivers/net/spider_net.h
> +++ b/drivers/net/spider_net.h
> @@ -493,7 +493,4 @@ struct spider_net_card {
> struct spider_net_descr darray[0];
> };
>
> -#define pr_err(fmt,arg...) \
> - printk(KERN_ERR fmt ,##arg)
> -
> #endif
> diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
> index 51807b4..c604d93 100644
> --- a/drivers/video/omap/lcd_h3.c
> +++ b/drivers/video/omap/lcd_h3.c
> @@ -28,8 +28,6 @@
>
> #define MODULE_NAME "omapfb-lcd_h3"
>
> -#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ":
> " fmt, ## args)
> -
> static int h3_panel_init(struct lcd_panel *panel, struct
> omapfb_device *fbdev)
> {
> return 0;
> @@ -48,7 +46,7 @@ static int h3_panel_enable(struct lcd_panel *panel)
> if (!r)
> r = tps65010_set_gpio_out_value(GPIO2, HIGH);
> if (r)
> - pr_err("Unable to turn on LCD panel\n");
> + pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");
>
> return r;
> }
> @@ -62,7 +60,7 @@ static void h3_panel_disable(struct
> lcd_panel *panel)
> if (!r)
> tps65010_set_gpio_out_value(GPIO2, LOW);
> if (r)
> - pr_err("Unable to turn off LCD panel\n");
> + pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
> }
>
> static unsigned long h3_panel_get_caps(struct lcd_panel *panel)
> diff --git a/drivers/video/omap/lcd_inn1610.c
> b/drivers/video/omap/lcd_inn1610.c
> index 95604ca..5ef119c 100644
> --- a/drivers/video/omap/lcd_inn1610.c
> +++ b/drivers/video/omap/lcd_inn1610.c
> @@ -27,20 +27,18 @@
>
> #define MODULE_NAME "omapfb-lcd_h3"
>
> -#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ":
> " fmt, ## args)
> -
> static int innovator1610_panel_init(struct lcd_panel *panel,
> struct omapfb_device *fbdev)
> {
> int r = 0;
>
> if (omap_request_gpio(14)) {
> - pr_err("can't request GPIO 14\n");
> + pr_err(MODULE_NAME ": can't request GPIO 14\n");
> r = -1;
> goto exit;
> }
> if (omap_request_gpio(15)) {
> - pr_err("can't request GPIO 15\n");
> + pr_err(MODULE_NAME ": can't request GPIO 15\n");
> omap_free_gpio(14);
> r = -1;
> goto exit;
> diff --git a/include/linux/kernel.h b/include/linux/kernel.h
> index 47160fe..166a822 100644
> --- a/include/linux/kernel.h
> +++ b/include/linux/kernel.h
> @@ -230,10 +230,25 @@ extern void print_hex_dump_bytes(const
> char *prefix_str, int prefix_type,
> const void *buf, size_t len);
> #define hex_asc(x) "0123456789abcdef"[x]
>
> +#define pr_emerg(fmt, arg...) \
> + printk(KERN_EMERG fmt, ##arg)
> +#define pr_alert(fmt, arg...) \
> + printk(KERN_ALERT fmt, ##arg)
> +#define pr_crit(fmt, arg...) \
> + printk(KERN_CRIT fmt, ##arg)
> +#define pr_err(fmt, arg...) \
> + printk(KERN_ERR fmt, ##arg)
> +#define pr_warning(fmt, arg...) \
> + printk(KERN_WARNING fmt, ##arg)
> +#define pr_notice(fmt, arg...) \
> + printk(KERN_NOTICE fmt, ##arg)
> +#define pr_info(fmt, arg...) \
> + printk(KERN_INFO fmt, ##arg)
> +
> #ifdef DEBUG
> /* If you are writing a driver, please use dev_dbg instead */
> -#define pr_debug(fmt,arg...) \
> - printk(KERN_DEBUG fmt,##arg)
> +#define pr_debug(fmt, arg...) \
> + printk(KERN_DEBUG fmt, ##arg)
> #else
> static inline int __attribute__ ((format (printf, 1, 2)))
> pr_debug(const char * fmt, ...)
> {
> @@ -241,9 +256,6 @@ static inline int __attribute__ ((format
> (printf, 1, 2))) pr_debug(const char *
> }
> #endif
>
> -#define pr_info(fmt,arg...) \
> - printk(KERN_INFO fmt,##arg)
> -
> /*
> * Display an IP address in readable format.
> */
> --
> 1.5.3.GIT
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists