[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <46EE5FA1.3080501@gmail.com>
Date: Mon, 17 Sep 2007 13:06:09 +0200
From: Jiri Slaby <jirislaby@...il.com>
To: Auke Kok <auke-jan.h.kok@...el.com>
CC: akpm@...ux-foundation.org, davem@...emloft.net,
netdev@...r.kernel.org, e1000-devel@...ts.sourceforge.net,
jirislaby@...il.com, Robert.Olsson@...a.slu.se, jeff@...zik.org
Subject: Re: [PATCH] [-MM, FIX V4] e1000e: incorporate napi_struct changes
from net-2.6.24.git
On 12/23/-28158 08:59 PM, Auke Kok wrote:
> This incorporates the new napi_struct changes into e1000e. Included
> bugfix for ifdown hang from Krishna Kumar for e1000.
>
> Disabling polling is no longer needed at init time, so remove
> napi_disable() call from _probe().
>
> This also fixes an endless polling loop where the driver signalled
> "polling done" improperly back to the stack.
>
> Signed-off-by: Auke Kok <auke-jan.h.kok@...el.com>
> ---
>
> drivers/net/e1000e/e1000.h | 2 ++
> drivers/net/e1000e/netdev.c | 40 ++++++++++++++++------------------------
> 2 files changed, 18 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
> index c57e35a..d2499bb 100644
> --- a/drivers/net/e1000e/e1000.h
> +++ b/drivers/net/e1000e/e1000.h
> @@ -187,6 +187,8 @@ struct e1000_adapter {
> struct e1000_ring *tx_ring /* One per active queue */
> ____cacheline_aligned_in_smp;
>
> + struct napi_struct napi;
> +
> unsigned long tx_queue_len;
> unsigned int restart_queue;
> u32 txd_cmd;
> diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
> index 372da46..eeb40cc 100644
> --- a/drivers/net/e1000e/netdev.c
> +++ b/drivers/net/e1000e/netdev.c
> @@ -1149,12 +1149,12 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
> mod_timer(&adapter->watchdog_timer, jiffies + 1);
> }
>
> - if (netif_rx_schedule_prep(netdev)) {
> + if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
> adapter->total_tx_bytes = 0;
> adapter->total_tx_packets = 0;
> adapter->total_rx_bytes = 0;
> adapter->total_rx_packets = 0;
> - __netif_rx_schedule(netdev);
> + __netif_rx_schedule(netdev, &adapter->napi);
> } else {
> atomic_dec(&adapter->irq_sem);
> }
> @@ -1212,12 +1212,12 @@ static irqreturn_t e1000_intr(int irq, void *data)
> mod_timer(&adapter->watchdog_timer, jiffies + 1);
> }
>
> - if (netif_rx_schedule_prep(netdev)) {
> + if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
> adapter->total_tx_bytes = 0;
> adapter->total_tx_packets = 0;
> adapter->total_rx_bytes = 0;
> adapter->total_rx_packets = 0;
> - __netif_rx_schedule(netdev);
> + __netif_rx_schedule(netdev, &adapter->napi);
> } else {
> atomic_dec(&adapter->irq_sem);
> }
> @@ -1662,10 +1662,10 @@ set_itr_now:
> * e1000_clean - NAPI Rx polling callback
> * @adapter: board private structure
> **/
> -static int e1000_clean(struct net_device *poll_dev, int *budget)
> +static int e1000_clean(struct napi_struct *napi, int budget)
> {
> - struct e1000_adapter *adapter;
> - int work_to_do = min(*budget, poll_dev->quota);
> + struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
> + struct net_device *poll_dev = adapter->netdev;
> int tx_cleaned = 0, work_done = 0;
>
> /* Must NOT use netdev_priv macro here. */
> @@ -1684,25 +1684,19 @@ static int e1000_clean(struct net_device *poll_dev, int *budget)
> spin_unlock(&adapter->tx_queue_lock);
> }
>
> - adapter->clean_rx(adapter, &work_done, work_to_do);
> - *budget -= work_done;
> - poll_dev->quota -= work_done;
> + adapter->clean_rx(adapter, &work_done, budget);
>
> /* If no Tx and not enough Rx work done, exit the polling mode */
> - if ((!tx_cleaned && (work_done == 0)) ||
> + if ((!tx_cleaned && (work_done < budget)) ||
Hi,
sorry to say that, but this change since last your patch changes nothing on my
machine (ksoftirq spinning at 100 % of CPU usage), I have some traces for you if
it helps:
SysRq : Show Regs
CPU 0:
Modules linked in: floppy sr_mod ehci_hcd cdrom rtc_cmos rtc_core usbhid rtc_lib
Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.23-rc4-mm1_64 #24
RIP: 0010:[<ffffffff803b4ea3>] [<ffffffff803b4ea3>] e1000_clean_rx_irq+0x273/0x320
RSP: 0000:ffffffff80703e18 EFLAGS: 00000202
RAX: ffff8100032b0700 RBX: ffffffff80703ea8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff810003097f60
RBP: ffffffff80703d90 R08: ffff810002b85340 R09: 0000000000000002
R10: 0000000000000002 R11: ffff8100032b0700 R12: ffffffff8020c1f1
R13: ffffffff80703d90 R14: ffff810004eac020 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff806ad000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00000000445d9978 CR3: 0000000004c49000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<IRQ> [<ffffffff803b4e86>] e1000_clean_rx_irq+0x256/0x320
[<ffffffff803b3059>] e1000_clean+0x109/0x250
[<ffffffff80250a43>] hrtimer_run_queues+0x33/0x1b0
[<ffffffff8046d777>] net_rx_action+0xd7/0x190
[<ffffffff8023dc54>] __do_softirq+0x74/0xf0
[<ffffffff8020ce6c>] call_softirq+0x1c/0x30
<EOI> [<ffffffff8020eecd>] do_softirq+0x3d/0x90
[<ffffffff8023d932>] ksoftirqd+0x72/0x100
[<ffffffff8023d8c0>] ksoftirqd+0x0/0x100
[<ffffffff8024dbbd>] kthread+0x4d/0x80
[<ffffffff8020caf8>] child_rip+0xa/0x12
[<ffffffff8024db70>] kthread+0x0/0x80
[<ffffffff8020caee>] child_rip+0x0/0x12
SysRq : Show Regs
CPU 0:
Modules linked in: floppy sr_mod ehci_hcd cdrom rtc_cmos rtc_core usbhid rtc_lib
Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.23-rc4-mm1_64 #24
RIP: 0010:[<ffffffff804cd3f8>] [<ffffffff804cd3f8>] _spin_trylock+0x8/0x20
RSP: 0000:ffffffff80703ea8 EFLAGS: 00000246
RAX: 0000000000000001 RBX: ffffffff80703ea8 RCX: ffffffff80703f28
RDX: ffff8100032b0888 RSI: 0000000000000040 RDI: ffff8100032b0850
RBP: ffffffff80703e20 R08: ffff810002b85340 R09: 0000000000000002
R10: 0000000000000002 R11: ffff8100032b0700 R12: ffffffff8020c1f1
R13: ffffffff80703e20 R14: 0000000000000040 R15: ffff8100032b0700
FS: 0000000000000000(0000) GS:ffffffff806ad000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00000000445d9978 CR3: 0000000004c49000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<IRQ> [<ffffffff803b302d>] e1000_clean+0xdd/0x250
[<ffffffff80250a43>] hrtimer_run_queues+0x33/0x1b0
[<ffffffff8046d777>] net_rx_action+0xd7/0x190
[<ffffffff8023dc54>] __do_softirq+0x74/0xf0
[<ffffffff8020ce6c>] call_softirq+0x1c/0x30
<EOI> [<ffffffff8020eecd>] do_softirq+0x3d/0x90
[<ffffffff8023d932>] ksoftirqd+0x72/0x100
[<ffffffff8023d8c0>] ksoftirqd+0x0/0x100
[<ffffffff8024dbbd>] kthread+0x4d/0x80
[<ffffffff8020caf8>] child_rip+0xa/0x12
[<ffffffff8024db70>] kthread+0x0/0x80
[<ffffffff8020caee>] child_rip+0x0/0x12
regards,
--
Jiri Slaby (jirislaby@...il.com)
Faculty of Informatics, Masaryk University
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists