[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <200709191238.00183.jbe@pengutronix.de>
Date: Wed, 19 Sep 2007 12:37:59 +0200
From: Juergen Beisert <jbe@...gutronix.de>
To: linuxppc-embedded@...abs.org
Cc: "Pedro Luis D. L." <carcadiz@...mail.com>,
Jon Smirl <jonsmirl@...il.com>,
Domen Puncer <domen@...erock.org>, netdev@...r.kernel.org
Subject: Re: [PATCH] phy: export phy_mii_ioctl
Pedro,
On Wednesday 19 September 2007 10:54, Pedro Luis D. L. wrote:
> I´m also working with a Phytec pcm030, but I can´t get it booted...
> Which kernel are you using?
> I tried to apply the 7 bestcomm patches from Sylvain and patch over these
> with this new ones that Domen released. The base kernel I´m using is
> 2.6.22.6 from kernel.org.
> Although I used the patch that creates pcm030.c in arch/platforms/52xx/ and
> compiled using this file, it gets halted at booting time.
>
> Bytes transferred = 5091 (13e3 hex)
> ## Booting image at 00500000 ...
> Image Name: Linux-2.6.22.6
> Created: 2007-09-19 8:53:02 UTC
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 1196911 Bytes = 1.1 MB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... OK
> Booting using flat device tree at 0x400000
>
> (No more output and boot is halted)
Check your oftree! Most of the time this behaviour means its a wrong oftree in
use.
Juergen
--
Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
Handelsregister: Amtsgericht Hildesheim, HRA 2686
Vertretung Sued/Muenchen, Germany
Phone: +49-8766-939 228 | Fax: +49-5121-206917-9
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists