| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 25 Oct 2007 13:58:03 -0700
From: Auke Kok <auke-jan.h.kok@...el.com>
To: jeff@...zik.org
Cc: netdev@...r.kernel.org, auke-jan.h.kok@...el.com
Subject: [PATCH 4/4] e1000e: Remove legacy jumbo frame receive code
The legacy jumbo frame receive code is no longer needed since all
hardware can do packet split and we're no longer offering a bypass
kernel config option to disable packet split. Remove the unused code.
Signed-off-by: Auke Kok <auke-jan.h.kok@...el.com>
---
drivers/net/e1000e/e1000.h | 1
drivers/net/e1000e/netdev.c | 282 -------------------------------------------
2 files changed, 1 insertions(+), 282 deletions(-)
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 811eada..473f78d 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -122,7 +122,6 @@ struct e1000_buffer {
u16 next_to_watch;
};
/* RX */
- struct page *page;
/* arrays of page information for packet split */
struct e1000_ps_page *ps_pages;
};
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 03fcc70..4fd2e23 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -333,94 +333,6 @@ no_buffers:
}
/**
- * e1000_alloc_rx_buffers_jumbo - Replace used jumbo receive buffers
- *
- * @adapter: address of board private structure
- * @cleaned_count: number of buffers to allocate this pass
- **/
-static void e1000_alloc_rx_buffers_jumbo(struct e1000_adapter *adapter,
- int cleaned_count)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_rx_desc *rx_desc;
- struct e1000_buffer *buffer_info;
- struct sk_buff *skb;
- unsigned int i;
- unsigned int bufsz = 256 -
- 16 /*for skb_reserve */ -
- NET_IP_ALIGN;
-
- i = rx_ring->next_to_use;
- buffer_info = &rx_ring->buffer_info[i];
-
- while (cleaned_count--) {
- skb = buffer_info->skb;
- if (skb) {
- skb_trim(skb, 0);
- goto check_page;
- }
-
- skb = netdev_alloc_skb(netdev, bufsz);
- if (!skb) {
- /* Better luck next round */
- adapter->alloc_rx_buff_failed++;
- break;
- }
-
- /* Make buffer alignment 2 beyond a 16 byte boundary
- * this will result in a 16 byte aligned IP header after
- * the 14 byte MAC header is removed
- */
- skb_reserve(skb, NET_IP_ALIGN);
-
- buffer_info->skb = skb;
-check_page:
- /* allocate a new page if necessary */
- if (!buffer_info->page) {
- buffer_info->page = alloc_page(GFP_ATOMIC);
- if (!buffer_info->page) {
- adapter->alloc_rx_buff_failed++;
- break;
- }
- }
-
- if (!buffer_info->dma)
- buffer_info->dma = pci_map_page(pdev,
- buffer_info->page, 0,
- PAGE_SIZE,
- PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(buffer_info->dma)) {
- dev_err(&adapter->pdev->dev, "RX DMA page map failed\n");
- adapter->rx_dma_failed++;
- break;
- }
-
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
-
- i++;
- if (i == rx_ring->count)
- i = 0;
- buffer_info = &rx_ring->buffer_info[i];
- }
-
- if (rx_ring->next_to_use != i) {
- rx_ring->next_to_use = i;
- if (i-- == 0)
- i = (rx_ring->count - 1);
-
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
- writel(i, adapter->hw.hw_addr + rx_ring->tail);
- }
-}
-
-/**
* e1000_clean_rx_irq - Send received data up the network stack; legacy
* @adapter: board private structure
*
@@ -549,15 +461,6 @@ next_desc:
return cleaned;
}
-static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
- u16 length)
-{
- bi->page = NULL;
- skb->len += length;
- skb->data_len += length;
- skb->truesize += length;
-}
-
static void e1000_put_txbuf(struct e1000_adapter *adapter,
struct e1000_buffer *buffer_info)
{
@@ -694,174 +597,6 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
}
/**
- * e1000_clean_rx_irq_jumbo - Send received data up the network stack; legacy
- * @adapter: board private structure
- *
- * the return value indicates whether actual cleaning was done, there
- * is no guarantee that everything was cleaned
- **/
-static bool e1000_clean_rx_irq_jumbo(struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_rx_desc *rx_desc, *next_rxd;
- struct e1000_buffer *buffer_info, *next_buffer;
- u32 length;
- unsigned int i;
- int cleaned_count = 0;
- bool cleaned = 0;
- unsigned int total_rx_bytes = 0, total_rx_packets = 0;
-
- i = rx_ring->next_to_clean;
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- buffer_info = &rx_ring->buffer_info[i];
-
- while (rx_desc->status & E1000_RXD_STAT_DD) {
- struct sk_buff *skb;
- u8 status;
-
- if (*work_done >= work_to_do)
- break;
- (*work_done)++;
-
- status = rx_desc->status;
- skb = buffer_info->skb;
- buffer_info->skb = NULL;
-
- i++;
- if (i == rx_ring->count)
- i = 0;
- next_rxd = E1000_RX_DESC(*rx_ring, i);
- prefetch(next_rxd);
-
- next_buffer = &rx_ring->buffer_info[i];
-
- cleaned = 1;
- cleaned_count++;
- pci_unmap_page(pdev,
- buffer_info->dma,
- PAGE_SIZE,
- PCI_DMA_FROMDEVICE);
- buffer_info->dma = 0;
-
- length = le16_to_cpu(rx_desc->length);
-
- /* errors is only valid for DD + EOP descriptors */
- if ((status & E1000_RXD_STAT_EOP) &&
- (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
- /* recycle both page and skb */
- buffer_info->skb = skb;
- /* an error means any chain goes out the window too */
- if (rx_ring->rx_skb_top)
- dev_kfree_skb(rx_ring->rx_skb_top);
- rx_ring->rx_skb_top = NULL;
- goto next_desc;
- }
-
-#define rxtop rx_ring->rx_skb_top
- if (!(status & E1000_RXD_STAT_EOP)) {
- /* this descriptor is only the beginning (or middle) */
- if (!rxtop) {
- /* this is the beginning of a chain */
- rxtop = skb;
- skb_fill_page_desc(rxtop, 0, buffer_info->page,
- 0, length);
- } else {
- /* this is the middle of a chain */
- skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->page, 0,
- length);
- /* re-use the skb, only consumed the page */
- buffer_info->skb = skb;
- }
- e1000_consume_page(buffer_info, rxtop, length);
- goto next_desc;
- } else {
- if (rxtop) {
- /* end of the chain */
- skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->page, 0, length);
- /* re-use the current skb, we only consumed the
- * page */
- buffer_info->skb = skb;
- skb = rxtop;
- rxtop = NULL;
- e1000_consume_page(buffer_info, skb, length);
- } else {
- /* no chain, got EOP, this buf is the packet
- * copybreak to save the put_page/alloc_page */
- if (length <= copybreak &&
- skb_tailroom(skb) >= length) {
- u8 *vaddr;
- vaddr = kmap_atomic(buffer_info->page,
- KM_SKB_DATA_SOFTIRQ);
- memcpy(skb_tail_pointer(skb),
- vaddr, length);
- kunmap_atomic(vaddr,
- KM_SKB_DATA_SOFTIRQ);
- /* re-use the page, so don't erase
- * buffer_info->page */
- skb_put(skb, length);
- } else {
- skb_fill_page_desc(skb, 0,
- buffer_info->page, 0,
- length);
- e1000_consume_page(buffer_info, skb,
- length);
- }
- }
- }
-
- /* Receive Checksum Offload XXX recompute due to CRC strip? */
- e1000_rx_checksum(adapter,
- (u32)(status) |
- ((u32)(rx_desc->errors) << 24),
- le16_to_cpu(rx_desc->csum), skb);
-
- pskb_trim(skb, skb->len - 4);
-
- /* probably a little skewed due to removing CRC */
- total_rx_bytes += skb->len;
- total_rx_packets++;
-
- /* eth type trans needs skb->data to point to something */
- if (!pskb_may_pull(skb, ETH_HLEN)) {
- ndev_err(netdev, "__pskb_pull_tail failed.\n");
- dev_kfree_skb(skb);
- goto next_desc;
- }
-
- e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
-
-next_desc:
- rx_desc->status = 0;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
- adapter->alloc_rx_buf(adapter, cleaned_count);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- buffer_info = next_buffer;
- }
- rx_ring->next_to_clean = i;
-
- cleaned_count = e1000_desc_unused(rx_ring);
- if (cleaned_count)
- adapter->alloc_rx_buf(adapter, cleaned_count);
-
- adapter->total_rx_packets += total_rx_packets;
- adapter->total_rx_bytes += total_rx_bytes;
- return cleaned;
-}
-
-/**
* e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
* @adapter: board private structure
*
@@ -1043,9 +778,6 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
pci_unmap_single(pdev, buffer_info->dma,
adapter->rx_buffer_len,
PCI_DMA_FROMDEVICE);
- else if (adapter->clean_rx == e1000_clean_rx_irq_jumbo)
- pci_unmap_page(pdev, buffer_info->dma,
- PAGE_SIZE, PCI_DMA_FROMDEVICE);
else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
pci_unmap_single(pdev, buffer_info->dma,
adapter->rx_ps_bsize0,
@@ -1053,11 +785,6 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
buffer_info->dma = 0;
}
- if (buffer_info->page) {
- put_page(buffer_info->page);
- buffer_info->page = NULL;
- }
-
if (buffer_info->skb) {
dev_kfree_skb(buffer_info->skb);
buffer_info->skb = NULL;
@@ -2072,11 +1799,6 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
sizeof(union e1000_rx_desc_packet_split);
adapter->clean_rx = e1000_clean_rx_irq_ps;
adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
- } else if (adapter->netdev->mtu > ETH_FRAME_LEN + VLAN_HLEN + 4) {
- rdlen = rx_ring->count *
- sizeof(struct e1000_rx_desc);
- adapter->clean_rx = e1000_clean_rx_irq_jumbo;
- adapter->alloc_rx_buf = e1000_alloc_rx_buffers_jumbo;
} else {
rdlen = rx_ring->count *
sizeof(struct e1000_rx_desc);
@@ -3623,9 +3345,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
* means we reserve 2 more, this pushes us to allocate from the next
* larger slab size.
- * i.e. RXBUFFER_2048 --> size-4096 slab
- * however with the new *_jumbo* routines, jumbo receives will use
- * fragmented skbs */
+ * i.e. RXBUFFER_2048 --> size-4096 slab */
if (max_frame <= 256)
adapter->rx_buffer_len = 256;
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists