| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 29 Oct 2007 10:46:19 -0700
From: Auke Kok <auke-jan.h.kok@...el.com>
To: jeff@...zik.org
Cc: netdev@...r.kernel.org, shemminger@...ux-foundation.org
Subject: [PATCH 3/4] e1000: sparse warnings fixes
From: Stephen Hemminger <shemminger@...ux-foundation.org>
Fix sparse warnings and problems from e1000 driver.
Added a sparse fix for the module param array index
-- Auke
Signed-off-by: Stephen Hemminger <shemminger@...ux-foundation.org>
Signed-off-by: Auke Kok <auke-jan.h.kok@...el.com>
---
drivers/net/e1000/e1000.h | 8 ++++++++
drivers/net/e1000/e1000_ethtool.c | 29 ++++++++++++-----------------
drivers/net/e1000/e1000_hw.c | 4 ++--
drivers/net/e1000/e1000_main.c | 7 ++-----
drivers/net/e1000/e1000_param.c | 23 ++++++++++++-----------
5 files changed, 36 insertions(+), 35 deletions(-)
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 781ed99..3b84028 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -351,4 +351,12 @@ enum e1000_state_t {
__E1000_DOWN
};
+extern char e1000_driver_name[];
+extern const char e1000_driver_version[];
+
+extern void e1000_power_up_phy(struct e1000_adapter *);
+extern void e1000_set_ethtool_ops(struct net_device *netdev);
+extern void e1000_check_options(struct e1000_adapter *adapter);
+
+
#endif /* _E1000_H_ */
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 6c9a643..667f18b 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -32,9 +32,6 @@
#include <asm/uaccess.h>
-extern char e1000_driver_name[];
-extern char e1000_driver_version[];
-
extern int e1000_up(struct e1000_adapter *adapter);
extern void e1000_down(struct e1000_adapter *adapter);
extern void e1000_reinit_locked(struct e1000_adapter *adapter);
@@ -733,16 +730,16 @@ err_setup:
#define REG_PATTERN_TEST(R, M, W) \
{ \
- uint32_t pat, value; \
- uint32_t test[] = \
+ uint32_t pat, val; \
+ const uint32_t test[] = \
{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
- for (pat = 0; pat < ARRAY_SIZE(test); pat++) { \
+ for (pat = 0; pat < ARRAY_SIZE(test); pat++) { \
E1000_WRITE_REG(&adapter->hw, R, (test[pat] & W)); \
- value = E1000_READ_REG(&adapter->hw, R); \
- if (value != (test[pat] & W & M)) { \
+ val = E1000_READ_REG(&adapter->hw, R); \
+ if (val != (test[pat] & W & M)) { \
DPRINTK(DRV, ERR, "pattern test reg %04X failed: got " \
"0x%08X expected 0x%08X\n", \
- E1000_##R, value, (test[pat] & W & M)); \
+ E1000_##R, val, (test[pat] & W & M)); \
*data = (adapter->hw.mac_type < e1000_82543) ? \
E1000_82542_##R : E1000_##R; \
return 1; \
@@ -752,12 +749,12 @@ err_setup:
#define REG_SET_AND_CHECK(R, M, W) \
{ \
- uint32_t value; \
+ uint32_t val; \
E1000_WRITE_REG(&adapter->hw, R, W & M); \
- value = E1000_READ_REG(&adapter->hw, R); \
- if ((W & M) != (value & M)) { \
+ val = E1000_READ_REG(&adapter->hw, R); \
+ if ((W & M) != (val & M)) { \
DPRINTK(DRV, ERR, "set/check reg %04X test failed: got 0x%08X "\
- "expected 0x%08X\n", E1000_##R, (value & M), (W & M)); \
+ "expected 0x%08X\n", E1000_##R, (val & M), (W & M)); \
*data = (adapter->hw.mac_type < e1000_82543) ? \
E1000_82542_##R : E1000_##R; \
return 1; \
@@ -1621,8 +1618,6 @@ e1000_get_sset_count(struct net_device *netdev, int sset)
}
}
-extern void e1000_power_up_phy(struct e1000_adapter *);
-
static void
e1000_diag_test(struct net_device *netdev,
struct ethtool_test *eth_test, uint64_t *data)
@@ -1859,8 +1854,8 @@ e1000_phys_id(struct net_device *netdev, uint32_t data)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- if (!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
- data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
+ if (!data)
+ data = INT_MAX;
if (adapter->hw.mac_type < e1000_82571) {
if (!adapter->blink_timer.function) {
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 8fa0fe4..7c6888c 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -8607,7 +8607,7 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
DEBUGFUNC("e1000_read_ich8_data");
- if (size < 1 || size > 2 || data == 0x0 ||
+ if (size < 1 || size > 2 || data == NULL ||
index > ICH_FLASH_LINEAR_ADDR_MASK)
return error;
@@ -8841,7 +8841,7 @@ e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
* amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the
* bank size may be 4, 8 or 64 KBytes
*****************************************************************************/
-int32_t
+static int32_t
e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank)
{
union ich8_hws_flash_status hsfsts;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index f1ce348..72deff0 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -37,8 +37,8 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
#define DRIVERNAPI "-NAPI"
#endif
#define DRV_VERSION "7.3.20-k2"DRIVERNAPI
-char e1000_driver_version[] = DRV_VERSION;
-static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
+const char e1000_driver_version[] = DRV_VERSION;
+static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
/* e1000_pci_tbl - PCI Device ID Table
*
@@ -188,7 +188,6 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
int cmd);
-void e1000_set_ethtool_ops(struct net_device *netdev);
static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
static void e1000_tx_timeout(struct net_device *dev);
@@ -213,8 +212,6 @@ static void e1000_shutdown(struct pci_dev *pdev);
static void e1000_netpoll (struct net_device *netdev);
#endif
-extern void e1000_check_options(struct e1000_adapter *adapter);
-
#define COPYBREAK_DEFAULT 256
static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
module_param(copybreak, uint, 0644);
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index f485874..e6565ce 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -46,7 +46,7 @@
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
#define E1000_PARAM(X, desc) \
static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
- static int num_##X = 0; \
+ static unsigned int num_##X; \
module_param_array_named(X, X, int, &num_##X, 0); \
MODULE_PARM_DESC(X, desc);
@@ -198,9 +198,9 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
struct e1000_option {
enum { enable_option, range_option, list_option } type;
- char *name;
- char *err;
- int def;
+ const char *name;
+ const char *err;
+ int def;
union {
struct { /* range_option info */
int min;
@@ -214,8 +214,9 @@ struct e1000_option {
};
static int __devinit
-e1000_validate_option(int *value, struct e1000_option *opt,
- struct e1000_adapter *adapter)
+e1000_validate_option(unsigned int *value,
+ const struct e1000_option *opt,
+ struct e1000_adapter *adapter)
{
if (*value == OPTION_UNSET) {
*value = opt->def;
@@ -348,7 +349,7 @@ e1000_check_options(struct e1000_adapter *adapter)
};
if (num_XsumRX > bd) {
- int rx_csum = XsumRX[bd];
+ unsigned int rx_csum = XsumRX[bd];
e1000_validate_option(&rx_csum, &opt, adapter);
adapter->rx_csum = rx_csum;
} else {
@@ -374,7 +375,7 @@ e1000_check_options(struct e1000_adapter *adapter)
};
if (num_FlowControl > bd) {
- int fc = FlowControl[bd];
+ unsigned int fc = FlowControl[bd];
e1000_validate_option(&fc, &opt, adapter);
adapter->hw.fc = adapter->hw.original_fc = fc;
} else {
@@ -506,7 +507,7 @@ e1000_check_options(struct e1000_adapter *adapter)
};
if (num_SmartPowerDownEnable > bd) {
- int spd = SmartPowerDownEnable[bd];
+ unsigned int spd = SmartPowerDownEnable[bd];
e1000_validate_option(&spd, &opt, adapter);
adapter->smart_power_down = spd;
} else {
@@ -522,7 +523,7 @@ e1000_check_options(struct e1000_adapter *adapter)
};
if (num_KumeranLockLoss > bd) {
- int kmrn_lock_loss = KumeranLockLoss[bd];
+ unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
} else {
@@ -581,7 +582,7 @@ e1000_check_fiber_options(struct e1000_adapter *adapter)
static void __devinit
e1000_check_copper_options(struct e1000_adapter *adapter)
{
- int speed, dplx, an;
+ unsigned int speed, dplx, an;
int bd = adapter->bd_number;
{ /* Speed */
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists