lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 8 Nov 2007 17:16:11 +0300
From:	Anton Vorontsov <avorontsov@...mvista.com>
To:	Kim Phillips <kim.phillips@...escale.com>
Cc:	Li Yang <leoli@...escale.com>,
	Kumar Gala <galak@...nel.crashing.org>, netdev@...r.kernel.org,
	linuxppc-dev@...abs.org, paulus@...ba.org, jgarzik@...ox.com
Subject: Re: [PATCH 0/5] fixups for mpc8360 rev. 2.1 erratum #2 (RGMII Timing)

On Mon, Nov 05, 2007 at 12:15:30PM -0600, Kim Phillips wrote:
> Hello all,
> 
> the following patches fix RGMII timing for rev. 2.1 of the mpc8360,
> according to erratum #2 (erratum text included below).  Basically the
> most intrusive part is the addition of two new RGMII Internal Delay
> modes; one for TX delay only, and the other for RX delay only (i.e, not
> both at the same time).
> 
> Please review, and since this affects both netdev and powerpc trees,
> one maintainer should ack them for the other to push upstream (i.e,
> Kumar acks them, and Leo picks them up to go through netdev or the
> other way around; either way is fine with me).  I'm hoping they're
> trivial enough to go in 2.6.24.
> 
> Depending on how the review goes, a follow-on patch to u-boot will be
> sent out that fixes up the phy-connection-type in the device tree (from
> "rgmii-id" to "rgmii-rxid" iff on mpc8360rev2.1).

I've upgraded CPU to rev2.1, board rev0.3.

Applied 5/5 patches onto paulus/powerpc.git at e403149c92a. Here is
the results:

If I use -rxid, then geth not able to transmit anything.
With -txid geth not able to receive anything.

With just -id everything works fine though...


Maybe there should be another condition, in addition to cpu rev2.1?

> Thanks,
> 
> Kim
> 
> mpc8360 rev 2.1 erratum #2:
> -----------
> Recommended AC timings for chip 8360Rev2.1 UCC ETH RGMII  when working
> with Rev Pilot MDS for proper RGMII operation:
> 
> IMMR_BASE + 0x14A8[4:5] = 11 (clk delay for UCC 2)
> IMMR_BASE + 0x14A8[18:19] = 11 (clk delay for UCC 1)
> IMMR_BASE + 0x14AC[20:27] = 10101010 (data delay for both UCC's)
> 
> The Phy (Marvell 88e1111) should be configured NOT to work with RGMII
> delay for TxD.

Thanks,

-- 
Anton Vorontsov
email: cbou@...l.ru
backup email: ya-cbou@...dex.ru
irc://irc.freenode.net/bd2
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists