| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20071213210707.BF80.MOKUNO@sm.sony.co.jp>
Date: Thu, 13 Dec 2007 21:07:22 +0900
From: Masakazu Mokuno <mokuno@...sony.co.jp>
To: netdev@...r.kernel.org
Cc: "Linux/PPC Development" <linuxppc-dev@...abs.org>
Subject: [PATCH 2/6] PS3: gelic: Add endianness macros
PS3: gelic: Add endianness macros
Mark the members of the structure for DMA descriptor proper endian
and use appropriate accessor macros.
As gelic driver works only on PS3, all these macros will be
expanded null.
Signed-off-by: Masakazu Mokuno <mokuno@...sony.co.jp>
---
drivers/net/ps3_gelic_net.c | 70 ++++++++++++++++++++++++--------------------
drivers/net/ps3_gelic_net.h | 16 +++++-----
2 files changed, 47 insertions(+), 39 deletions(-)
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -98,7 +98,7 @@ gelic_net_get_descr_status(struct gelic_
{
u32 cmd_status;
- cmd_status = descr->dmac_cmd_status;
+ cmd_status = be32_to_cpu(descr->dmac_cmd_status);
cmd_status >>= GELIC_NET_DESCR_IND_PROC_SHIFT;
return cmd_status;
}
@@ -117,13 +117,13 @@ static void gelic_net_set_descr_status(s
u32 cmd_status;
/* read the status */
- cmd_status = descr->dmac_cmd_status;
+ cmd_status = be32_to_cpu(descr->dmac_cmd_status);
/* clean the upper 4 bits */
cmd_status &= GELIC_NET_DESCR_IND_PROC_MASKO;
/* add the status to it */
cmd_status |= ((u32)status) << GELIC_NET_DESCR_IND_PROC_SHIFT;
/* and write it back */
- descr->dmac_cmd_status = cmd_status;
+ descr->dmac_cmd_status = cpu_to_be32(cmd_status);
/*
* dma_cmd_status field is used to indicate whether the descriptor
* is valid or not.
@@ -193,7 +193,7 @@ static int gelic_net_init_chain(struct g
/* chain bus addr of hw descriptor */
descr = start_descr;
for (i = 0; i < no; i++, descr++) {
- descr->next_descr_addr = descr->next->bus_addr;
+ descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
}
chain->head = start_descr;
@@ -245,7 +245,7 @@ static int gelic_net_prepare_rx_descr(st
"%s:allocate skb failed !!\n", __func__);
return -ENOMEM;
}
- descr->buf_size = bufsize;
+ descr->buf_size = cpu_to_be32(bufsize);
descr->dmac_cmd_status = 0;
descr->result_size = 0;
descr->valid_size = 0;
@@ -256,9 +256,10 @@ static int gelic_net_prepare_rx_descr(st
if (offset)
skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
/* io-mmu-map the skb */
- descr->buf_addr = dma_map_single(ctodev(card), descr->skb->data,
- GELIC_NET_MAX_MTU,
- DMA_FROM_DEVICE);
+ descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card),
+ descr->skb->data,
+ GELIC_NET_MAX_MTU,
+ DMA_FROM_DEVICE));
if (!descr->buf_addr) {
dev_kfree_skb_any(descr->skb);
descr->skb = NULL;
@@ -284,7 +285,7 @@ static void gelic_net_release_rx_chain(s
do {
if (descr->skb) {
dma_unmap_single(ctodev(card),
- descr->buf_addr,
+ be32_to_cpu(descr->buf_addr),
descr->skb->len,
DMA_FROM_DEVICE);
descr->buf_addr = 0;
@@ -353,10 +354,11 @@ static void gelic_net_release_tx_descr(s
{
struct sk_buff *skb = descr->skb;
- BUG_ON(!(descr->data_status & (1 << GELIC_NET_TXDESC_TAIL)));
+ BUG_ON(!(be32_to_cpu(descr->data_status) &
+ (1 << GELIC_NET_TXDESC_TAIL)));
- dma_unmap_single(ctodev(card), descr->buf_addr, skb->len,
- DMA_TO_DEVICE);
+ dma_unmap_single(ctodev(card),
+ be32_to_cpu(descr->buf_addr), skb->len, DMA_TO_DEVICE);
dev_kfree_skb_any(skb);
descr->buf_addr = 0;
@@ -610,28 +612,29 @@ static void gelic_net_set_txdescr_cmdsta
struct sk_buff *skb)
{
if (skb->ip_summed != CHECKSUM_PARTIAL)
- descr->dmac_cmd_status = GELIC_NET_DMAC_CMDSTAT_NOCS |
- GELIC_NET_DMAC_CMDSTAT_END_FRAME;
+ descr->dmac_cmd_status =
+ cpu_to_be32(GELIC_NET_DMAC_CMDSTAT_NOCS |
+ GELIC_NET_DMAC_CMDSTAT_END_FRAME);
else {
/* is packet ip?
* if yes: tcp? udp? */
if (skb->protocol == htons(ETH_P_IP)) {
if (ip_hdr(skb)->protocol == IPPROTO_TCP)
descr->dmac_cmd_status =
- GELIC_NET_DMAC_CMDSTAT_TCPCS |
- GELIC_NET_DMAC_CMDSTAT_END_FRAME;
+ cpu_to_be32(GELIC_NET_DMAC_CMDSTAT_TCPCS |
+ GELIC_NET_DMAC_CMDSTAT_END_FRAME);
else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
descr->dmac_cmd_status =
- GELIC_NET_DMAC_CMDSTAT_UDPCS |
- GELIC_NET_DMAC_CMDSTAT_END_FRAME;
+ cpu_to_be32(GELIC_NET_DMAC_CMDSTAT_UDPCS |
+ GELIC_NET_DMAC_CMDSTAT_END_FRAME);
else /*
* the stack should checksum non-tcp and non-udp
* packets on his own: NETIF_F_IP_CSUM
*/
descr->dmac_cmd_status =
- GELIC_NET_DMAC_CMDSTAT_NOCS |
- GELIC_NET_DMAC_CMDSTAT_END_FRAME;
+ cpu_to_be32(GELIC_NET_DMAC_CMDSTAT_NOCS |
+ GELIC_NET_DMAC_CMDSTAT_END_FRAME);
}
}
}
@@ -694,8 +697,8 @@ static int gelic_net_prepare_tx_descr_v(
return -ENOMEM;
}
- descr->buf_addr = buf;
- descr->buf_size = skb->len;
+ descr->buf_addr = cpu_to_be32(buf);
+ descr->buf_size = cpu_to_be32(skb->len);
descr->skb = skb;
descr->data_status = 0;
descr->next_descr_addr = 0; /* terminate hw descr */
@@ -774,7 +777,7 @@ static int gelic_net_xmit(struct sk_buff
* link this prepared descriptor to previous one
* to achieve high performance
*/
- descr->prev->next_descr_addr = descr->bus_addr;
+ descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
/*
* as hardware descriptor is modified in the above lines,
* ensure that the hardware sees it
@@ -814,19 +817,23 @@ static void gelic_net_pass_skb_up(struct
struct net_device *netdev;
u32 data_status, data_error;
- data_status = descr->data_status;
- data_error = descr->data_error;
+ data_status = be32_to_cpu(descr->data_status);
+ data_error = be32_to_cpu(descr->data_error);
netdev = card->netdev;
/* unmap skb buffer */
skb = descr->skb;
- dma_unmap_single(ctodev(card), descr->buf_addr, GELIC_NET_MAX_MTU,
+ dma_unmap_single(ctodev(card),
+ be32_to_cpu(descr->buf_addr), GELIC_NET_MAX_MTU,
DMA_FROM_DEVICE);
- skb_put(skb, descr->valid_size? descr->valid_size : descr->result_size);
+ skb_put(skb, descr->valid_size ?
+ be32_to_cpu(descr->valid_size) :
+ be32_to_cpu(descr->result_size));
if (!descr->valid_size)
dev_info(ctodev(card), "buffer full %x %x %x\n",
- descr->result_size, descr->buf_size,
- descr->dmac_cmd_status);
+ be32_to_cpu(descr->result_size),
+ be32_to_cpu(descr->buf_size),
+ be32_to_cpu(descr->dmac_cmd_status));
descr->skb = NULL;
/*
@@ -873,7 +880,8 @@ static int gelic_net_decode_one_descr(st
status = gelic_net_get_descr_status(descr);
/* is this descriptor terminated with next_descr == NULL? */
dmac_chain_ended =
- descr->dmac_cmd_status & GELIC_NET_DMAC_CMDSTAT_RXDCEIS;
+ be32_to_cpu(descr->dmac_cmd_status) &
+ GELIC_NET_DMAC_CMDSTAT_RXDCEIS;
if (status == GELIC_NET_DESCR_CARDOWNED)
return 0;
@@ -940,7 +948,7 @@ refill:
/*
* Set this descriptor the end of the chain.
*/
- descr->prev->next_descr_addr = descr->bus_addr;
+ descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
/*
* If dmac chain was met, DMAC stopped.
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ps3_gelic_net.h
@@ -169,14 +169,14 @@ enum gelic_net_descr_status {
#define GELIC_NET_DESCR_SIZE (32)
struct gelic_net_descr {
/* as defined by the hardware */
- u32 buf_addr;
- u32 buf_size;
- u32 next_descr_addr;
- u32 dmac_cmd_status;
- u32 result_size;
- u32 valid_size; /* all zeroes for tx */
- u32 data_status;
- u32 data_error; /* all zeroes for tx */
+ __be32 buf_addr;
+ __be32 buf_size;
+ __be32 next_descr_addr;
+ __be32 dmac_cmd_status;
+ __be32 result_size;
+ __be32 valid_size; /* all zeroes for tx */
+ __be32 data_status;
+ __be32 data_error; /* all zeroes for tx */
/* used in the driver */
struct sk_buff *skb;
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists