| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1197920414.7518.45.camel@flash>
Date: 17 Dec 2007 11:40:15 -0800
From: Ramkrishna Vepa <ram.vepa@...erion.com>
To: netdev@...r.kernel.org, jgarzik@...ox.com
Cc: support@...erion.com
Subject: [PATCH 2.6.25 2/2]S2io: Fixes to enable multiple transmit fifos
Multiple transmit fifo initialization -
- Assigned equal scheduling priority for all configured FIFO's.
- Modularized transmit traffic interrupt initialization since it is executed in
s2io_card_up and s2io_link. Enable continuous tx interrupt when link is UP
and vice verse.
- Enable transmit interrupts for all configured transmit fifos.
- Fixed typo errors.
Signed-off-by: Surjit Reang <surjit.reang@...erion.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@...erion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@...erion.com>
---
diff -Nurp 2-0-26-15-1/drivers/net/s2io.c 2-0-26-15-2/drivers/net/s2io.c
--- 2-0-26-15-1/drivers/net/s2io.c 2007-12-17 22:10:50.000000000 +0530
+++ 2-0-26-15-2/drivers/net/s2io.c 2007-12-17 22:52:13.000000000 +0530
@@ -84,7 +84,7 @@
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.26.15-1"
+#define DRV_VERSION "2.0.26.15-2"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
@@ -1079,8 +1079,67 @@ static int s2io_print_pci_mode(struct s2
}
/**
+ * init_tti - Initialization transmit traffic interrupt scheme
+ * @nic: device private variable
+ * @link: link status (UP/DOWN) used to enable/disable continuous
+ * transmit interrupts
+ * Description: The function configures transmit traffic interrupts
+ * Return Value: SUCCESS on success and
+ * '-1' on failure
+ */
+
+int init_tti(struct s2io_nic *nic, int link)
+{
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
+ register u64 val64 = 0;
+ int i;
+ struct config_param *config;
+
+ config = &nic->config;
+
+ for (i = 0; i < config->tx_fifo_num; i++) {
+ /*
+ * TTI Initialization. Default Tx timer gets us about
+ * 250 interrupts per sec. Continuous interrupts are enabled
+ * by default.
+ */
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ int count = (nic->config.bus_speed * 125)/2;
+ val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
+ } else
+ val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
+
+ val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
+ TTI_DATA1_MEM_TX_URNG_B(0x10) |
+ TTI_DATA1_MEM_TX_URNG_C(0x30) |
+ TTI_DATA1_MEM_TX_TIMER_AC_EN;
+
+ if (use_continuous_tx_intrs && (link == LINK_UP))
+ val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
+ writeq(val64, &bar0->tti_data1_mem);
+
+ val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
+ TTI_DATA2_MEM_TX_UFC_B(0x20) |
+ TTI_DATA2_MEM_TX_UFC_C(0x40) |
+ TTI_DATA2_MEM_TX_UFC_D(0x80);
+
+ writeq(val64, &bar0->tti_data2_mem);
+
+ val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD |
+ TTI_CMD_MEM_OFFSET(i);
+ writeq(val64, &bar0->tti_command_mem);
+
+ if (wait_for_cmd_complete(&bar0->tti_command_mem,
+ TTI_CMD_MEM_STROBE_NEW_CMD, S2IO_BIT_RESET) != SUCCESS)
+ return FAILURE;
+ }
+
+ return SUCCESS;
+}
+
+/**
* init_nic - Initialization of hardware
- * @nic: device peivate variable
+ * @nic: device private variable
* Description: The function sequentially configures every block
* of the H/W from their reset values.
* Return Value: SUCCESS on success and
@@ -1185,9 +1244,9 @@ static int init_nic(struct s2io_nic *nic
for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
val64 |=
- vBIT(config->tx_cfg[i].fifo_len - 1, ((i * 32) + 19),
+ vBIT(config->tx_cfg[i].fifo_len - 1, ((j * 32) + 19),
13) | vBIT(config->tx_cfg[i].fifo_priority,
- ((i * 32) + 5), 3);
+ ((j * 32) + 5), 3);
if (i == (config->tx_fifo_num - 1)) {
if (i % 2 == 0)
@@ -1198,17 +1257,25 @@ static int init_nic(struct s2io_nic *nic
case 1:
writeq(val64, &bar0->tx_fifo_partition_0);
val64 = 0;
+ j = 0;
break;
case 3:
writeq(val64, &bar0->tx_fifo_partition_1);
val64 = 0;
+ j = 0;
break;
case 5:
writeq(val64, &bar0->tx_fifo_partition_2);
val64 = 0;
+ j = 0;
break;
case 7:
writeq(val64, &bar0->tx_fifo_partition_3);
+ val64 = 0;
+ j = 0;
+ break;
+ default:
+ j++;
break;
}
}
@@ -1294,11 +1361,11 @@ static int init_nic(struct s2io_nic *nic
/*
* Filling Tx round robin registers
- * as per the number of FIFOs
+ * as per the number of FIFOs for equal scheduling priority
*/
switch (config->tx_fifo_num) {
case 1:
- val64 = 0x0000000000000000ULL;
+ val64 = 0x0;
writeq(val64, &bar0->tx_w_round_robin_0);
writeq(val64, &bar0->tx_w_round_robin_1);
writeq(val64, &bar0->tx_w_round_robin_2);
@@ -1306,87 +1373,78 @@ static int init_nic(struct s2io_nic *nic
writeq(val64, &bar0->tx_w_round_robin_4);
break;
case 2:
- val64 = 0x0000010000010000ULL;
+ val64 = 0x0001000100010001ULL;
writeq(val64, &bar0->tx_w_round_robin_0);
- val64 = 0x0100000100000100ULL;
writeq(val64, &bar0->tx_w_round_robin_1);
- val64 = 0x0001000001000001ULL;
writeq(val64, &bar0->tx_w_round_robin_2);
- val64 = 0x0000010000010000ULL;
writeq(val64, &bar0->tx_w_round_robin_3);
- val64 = 0x0100000000000000ULL;
+ val64 = 0x0001000100000000ULL;
writeq(val64, &bar0->tx_w_round_robin_4);
break;
case 3:
- val64 = 0x0001000102000001ULL;
+ val64 = 0x0001020001020001ULL;
writeq(val64, &bar0->tx_w_round_robin_0);
- val64 = 0x0001020000010001ULL;
+ val64 = 0x0200010200010200ULL;
writeq(val64, &bar0->tx_w_round_robin_1);
- val64 = 0x0200000100010200ULL;
+ val64 = 0x0102000102000102ULL;
writeq(val64, &bar0->tx_w_round_robin_2);
- val64 = 0x0001000102000001ULL;
+ val64 = 0x0001020001020001ULL;
writeq(val64, &bar0->tx_w_round_robin_3);
- val64 = 0x0001020000000000ULL;
+ val64 = 0x0200010200000000ULL;
writeq(val64, &bar0->tx_w_round_robin_4);
break;
case 4:
- val64 = 0x0001020300010200ULL;
+ val64 = 0x0001020300010203ULL;
writeq(val64, &bar0->tx_w_round_robin_0);
- val64 = 0x0100000102030001ULL;
writeq(val64, &bar0->tx_w_round_robin_1);
- val64 = 0x0200010000010203ULL;
writeq(val64, &bar0->tx_w_round_robin_2);
- val64 = 0x0001020001000001ULL;
writeq(val64, &bar0->tx_w_round_robin_3);
- val64 = 0x0203000100000000ULL;
+ val64 = 0x0001020300000000ULL;
writeq(val64, &bar0->tx_w_round_robin_4);
break;
case 5:
- val64 = 0x0001000203000102ULL;
+ val64 = 0x0001020304000102ULL;
writeq(val64, &bar0->tx_w_round_robin_0);
- val64 = 0x0001020001030004ULL;
+ val64 = 0x0304000102030400ULL;
writeq(val64, &bar0->tx_w_round_robin_1);
- val64 = 0x0001000203000102ULL;
+ val64 = 0x0102030400010203ULL;
writeq(val64, &bar0->tx_w_round_robin_2);
- val64 = 0x0001020001030004ULL;
+ val64 = 0x0400010203040001ULL;
writeq(val64, &bar0->tx_w_round_robin_3);
- val64 = 0x0001000000000000ULL;
+ val64 = 0x0203040000000000ULL;
writeq(val64, &bar0->tx_w_round_robin_4);
break;
case 6:
- val64 = 0x0001020304000102ULL;
+ val64 = 0x0001020304050001ULL;
writeq(val64, &bar0->tx_w_round_robin_0);
- val64 = 0x0304050001020001ULL;
+ val64 = 0x0203040500010203ULL;
writeq(val64, &bar0->tx_w_round_robin_1);
- val64 = 0x0203000100000102ULL;
+ val64 = 0x0405000102030405ULL;
writeq(val64, &bar0->tx_w_round_robin_2);
- val64 = 0x0304000102030405ULL;
+ val64 = 0x0001020304050001ULL;
writeq(val64, &bar0->tx_w_round_robin_3);
- val64 = 0x0001000200000000ULL;
+ val64 = 0x0203040500000000ULL;
writeq(val64, &bar0->tx_w_round_robin_4);
break;
case 7:
- val64 = 0x0001020001020300ULL;
+ val64 = 0x0001020304050600ULL;
writeq(val64, &bar0->tx_w_round_robin_0);
- val64 = 0x0102030400010203ULL;
+ val64 = 0x0102030405060001ULL;
writeq(val64, &bar0->tx_w_round_robin_1);
- val64 = 0x0405060001020001ULL;
+ val64 = 0x0203040506000102ULL;
writeq(val64, &bar0->tx_w_round_robin_2);
- val64 = 0x0304050000010200ULL;
+ val64 = 0x0304050600010203ULL;
writeq(val64, &bar0->tx_w_round_robin_3);
- val64 = 0x0102030000000000ULL;
+ val64 = 0x0405060000000000ULL;
writeq(val64, &bar0->tx_w_round_robin_4);
break;
case 8:
- val64 = 0x0001020300040105ULL;
+ val64 = 0x0001020304050607ULL;
writeq(val64, &bar0->tx_w_round_robin_0);
- val64 = 0x0200030106000204ULL;
writeq(val64, &bar0->tx_w_round_robin_1);
- val64 = 0x0103000502010007ULL;
writeq(val64, &bar0->tx_w_round_robin_2);
- val64 = 0x0304010002060500ULL;
writeq(val64, &bar0->tx_w_round_robin_3);
- val64 = 0x0103020400000000ULL;
+ val64 = 0x0001020300000000ULL;
writeq(val64, &bar0->tx_w_round_robin_4);
break;
}
@@ -1563,58 +1621,14 @@ static int init_nic(struct s2io_nic *nic
MAC_RX_LINK_UTIL_VAL(rmac_util_period);
writeq(val64, &bar0->mac_link_util);
-
/*
* Initializing the Transmit and Receive Traffic Interrupt
* Scheme.
*/
- /*
- * TTI Initialization. Default Tx timer gets us about
- * 250 interrupts per sec. Continuous interrupts are enabled
- * by default.
- */
- if (nic->device_type == XFRAME_II_DEVICE) {
- int count = (nic->config.bus_speed * 125)/2;
- val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
- } else {
-
- val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
- }
- val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
- TTI_DATA1_MEM_TX_URNG_B(0x10) |
- TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN;
- if (use_continuous_tx_intrs)
- val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
- writeq(val64, &bar0->tti_data1_mem);
-
- val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
- TTI_DATA2_MEM_TX_UFC_B(0x20) |
- TTI_DATA2_MEM_TX_UFC_C(0x40) | TTI_DATA2_MEM_TX_UFC_D(0x80);
- writeq(val64, &bar0->tti_data2_mem);
- val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
- writeq(val64, &bar0->tti_command_mem);
-
- /*
- * Once the operation completes, the Strobe bit of the command
- * register will be reset. We poll for this particular condition
- * We wait for a maximum of 500ms for the operation to complete,
- * if it's not complete by then we return error.
- */
- time = 0;
- while (TRUE) {
- val64 = readq(&bar0->tti_command_mem);
- if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
- break;
- }
- if (time > 10) {
- DBG_PRINT(ERR_DBG, "%s: TTI init Failed\n",
- dev->name);
- return -ENODEV;
- }
- msleep(50);
- time++;
- }
+ /* Initialize TTI */
+ if (SUCCESS != init_tti(nic, nic->last_link_state))
+ return -ENODEV;
/* RTI Initialization */
if (nic->device_type == XFRAME_II_DEVICE) {
@@ -7439,6 +7453,7 @@ static void s2io_link(struct s2io_nic *
struct net_device *dev = (struct net_device *) sp->dev;
if (link != sp->last_link_state) {
+ init_tti(sp, link);
if (link == LINK_DOWN) {
DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
netif_carrier_off(dev);
@@ -7537,7 +7552,7 @@ static int s2io_verify_parm(struct pci_d
/**
* rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS
* or Traffic class respectively.
- * @nic: device peivate variable
+ * @nic: device private variable
* Description: The function configures the receive steering to
* desired receive ring.
* Return Value: SUCCESS on success and
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists