| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 20 Dec 2007 15:21:31 -0800
From: "Matt Carlson" <mcarlson@...adcom.com>
To: davem@...emloft.net
cc: netdev@...r.kernel.org, "Michael Chan" <mchan@...adcom.com>,
andy@...yhouse.net
Subject: [PATCH 1/8] tg3: Separate requested and actual flow control
parameters
This patch removes the TX and RX flow control flags from tg3_flags and
adds two new flow control variables, flowctrl and active_flowctrl.
Signed-off-by: Matt Carlson <mcarlson@...adcom.com>
Signed-off-by: Michael Chan <mchan@...adcom.com>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 4942f7d..d503214 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1602,17 +1602,19 @@ static void tg3_link_report(struct tg3 *tp)
(tp->link_config.active_duplex == DUPLEX_FULL ?
"full" : "half"));
- printk(KERN_INFO PFX "%s: Flow control is %s for TX and "
- "%s for RX.\n",
+ printk(KERN_INFO PFX
+ "%s: Flow control is %s for TX and %s for RX.\n",
tp->dev->name,
- (tp->tg3_flags & TG3_FLAG_TX_PAUSE) ? "on" : "off",
- (tp->tg3_flags & TG3_FLAG_RX_PAUSE) ? "on" : "off");
+ (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX) ?
+ "on" : "off",
+ (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX) ?
+ "on" : "off");
}
}
static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv)
{
- u32 new_tg3_flags = 0;
+ u8 new_tg3_flags = 0;
u32 old_rx_mode = tp->rx_mode;
u32 old_tx_mode = tp->tx_mode;
@@ -1639,31 +1641,27 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv
if (local_adv & ADVERTISE_PAUSE_CAP) {
if (local_adv & ADVERTISE_PAUSE_ASYM) {
if (remote_adv & LPA_PAUSE_CAP)
- new_tg3_flags |=
- (TG3_FLAG_RX_PAUSE |
- TG3_FLAG_TX_PAUSE);
+ new_tg3_flags = TG3_FLOW_CTRL_RX |
+ TG3_FLOW_CTRL_TX;
else if (remote_adv & LPA_PAUSE_ASYM)
- new_tg3_flags |=
- (TG3_FLAG_RX_PAUSE);
+ new_tg3_flags = TG3_FLOW_CTRL_RX;
} else {
if (remote_adv & LPA_PAUSE_CAP)
- new_tg3_flags |=
- (TG3_FLAG_RX_PAUSE |
- TG3_FLAG_TX_PAUSE);
+ new_tg3_flags = TG3_FLOW_CTRL_RX |
+ TG3_FLOW_CTRL_TX;
}
} else if (local_adv & ADVERTISE_PAUSE_ASYM) {
if ((remote_adv & LPA_PAUSE_CAP) &&
- (remote_adv & LPA_PAUSE_ASYM))
- new_tg3_flags |= TG3_FLAG_TX_PAUSE;
+ (remote_adv & LPA_PAUSE_ASYM))
+ new_tg3_flags = TG3_FLOW_CTRL_TX;
}
-
- tp->tg3_flags &= ~(TG3_FLAG_RX_PAUSE | TG3_FLAG_TX_PAUSE);
- tp->tg3_flags |= new_tg3_flags;
} else {
- new_tg3_flags = tp->tg3_flags;
+ new_tg3_flags = tp->link_config.flowctrl;
}
- if (new_tg3_flags & TG3_FLAG_RX_PAUSE)
+ tp->link_config.active_flowctrl = new_tg3_flags;
+
+ if (new_tg3_flags & TG3_FLOW_CTRL_RX)
tp->rx_mode |= RX_MODE_FLOW_CTRL_ENABLE;
else
tp->rx_mode &= ~RX_MODE_FLOW_CTRL_ENABLE;
@@ -1672,7 +1670,7 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv
tw32_f(MAC_RX_MODE, tp->rx_mode);
}
- if (new_tg3_flags & TG3_FLAG_TX_PAUSE)
+ if (new_tg3_flags & TG3_FLOW_CTRL_TX)
tp->tx_mode |= TX_MODE_FLOW_CTRL_ENABLE;
else
tp->tx_mode &= ~TX_MODE_FLOW_CTRL_ENABLE;
@@ -2812,9 +2810,7 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
int current_link_up;
int i;
- orig_pause_cfg =
- (tp->tg3_flags & (TG3_FLAG_RX_PAUSE |
- TG3_FLAG_TX_PAUSE));
+ orig_pause_cfg = tp->link_config.active_flowctrl;
orig_active_speed = tp->link_config.active_speed;
orig_active_duplex = tp->link_config.active_duplex;
@@ -2903,9 +2899,7 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
netif_carrier_off(tp->dev);
tg3_link_report(tp);
} else {
- u32 now_pause_cfg =
- tp->tg3_flags & (TG3_FLAG_RX_PAUSE |
- TG3_FLAG_TX_PAUSE);
+ u32 now_pause_cfg = tp->link_config.active_flowctrl;
if (orig_pause_cfg != now_pause_cfg ||
orig_active_speed != tp->link_config.active_speed ||
orig_active_duplex != tp->link_config.active_duplex)
@@ -8571,8 +8565,16 @@ static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam
struct tg3 *tp = netdev_priv(dev);
epause->autoneg = (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) != 0;
- epause->rx_pause = (tp->tg3_flags & TG3_FLAG_RX_PAUSE) != 0;
- epause->tx_pause = (tp->tg3_flags & TG3_FLAG_TX_PAUSE) != 0;
+
+ if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX)
+ epause->rx_pause = 1;
+ else
+ epause->rx_pause = 0;
+
+ if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX)
+ epause->tx_pause = 1;
+ else
+ epause->tx_pause = 0;
}
static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
@@ -8592,13 +8594,13 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
else
tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG;
if (epause->rx_pause)
- tp->tg3_flags |= TG3_FLAG_RX_PAUSE;
+ tp->link_config.flowctrl |= TG3_FLOW_CTRL_RX;
else
- tp->tg3_flags &= ~TG3_FLAG_RX_PAUSE;
+ tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_RX;
if (epause->tx_pause)
- tp->tg3_flags |= TG3_FLAG_TX_PAUSE;
+ tp->link_config.flowctrl |= TG3_FLOW_CTRL_TX;
else
- tp->tg3_flags &= ~TG3_FLAG_TX_PAUSE;
+ tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_TX;
if (netif_running(dev)) {
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
@@ -12620,6 +12622,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
/* flow control autonegotiation is default behavior */
tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+ tp->link_config.flowctrl = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX;
tg3_init_coal(tp);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index da18fb2..ac47c17 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2103,13 +2103,18 @@ struct tg3_link_config {
u16 speed;
u8 duplex;
u8 autoneg;
+ u8 flowctrl;
+#define TG3_FLOW_CTRL_TX 0x01
+#define TG3_FLOW_CTRL_RX 0x02
/* Describes what we actually have. */
- u16 active_speed;
+ u8 active_flowctrl;
+
u8 active_duplex;
#define SPEED_INVALID 0xffff
#define DUPLEX_INVALID 0xff
#define AUTONEG_INVALID 0xff
+ u16 active_speed;
/* When we go in and out of low power mode we need
* to swap with this state.
@@ -2337,8 +2342,6 @@ struct tg3 {
#define TG3_FLAG_EEPROM_WRITE_PROT 0x00001000
#define TG3_FLAG_NVRAM 0x00002000
#define TG3_FLAG_NVRAM_BUFFERED 0x00004000
-#define TG3_FLAG_RX_PAUSE 0x00008000
-#define TG3_FLAG_TX_PAUSE 0x00010000
#define TG3_FLAG_PCIX_MODE 0x00020000
#define TG3_FLAG_PCI_HIGH_SPEED 0x00040000
#define TG3_FLAG_PCI_32BIT 0x00080000
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists