| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1198192896.0@teletran1>
Date: Thu, 20 Dec 2007 15:21:36 -0800
From: "Matt Carlson" <mcarlson@...adcom.com>
To: davem@...emloft.net
cc: netdev@...r.kernel.org, "Michael Chan" <mchan@...adcom.com>,
andy@...yhouse.net
Subject: [PATCH 3/8] tg3: Add 1000T & 1000X flowctl adv helpers
This patch adds two functions designed to convert abstract TX & RX
flow control parameters to 1000-BaseT and 1000-BaseX autonegotiation
advertisements. Code that uses standard definitions which statically
advertises TX & RX flow control has been replaced with code that
configures the advertisements based on administrator dictated
preferences.
Signed-off-by: Matt Carlson <mcarlson@...adcom.com>
Signed-off-by: Michael Chan <mchan@...adcom.com>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 0cb0a6a..9e51457 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1612,6 +1612,38 @@ static void tg3_link_report(struct tg3 *tp)
}
}
+static u16 tg3_advert_flowctrl_1000T(u8 flow_ctrl)
+{
+ u16 miireg;
+
+ if ((flow_ctrl & TG3_FLOW_CTRL_TX) && (flow_ctrl & TG3_FLOW_CTRL_RX))
+ miireg = ADVERTISE_PAUSE_CAP;
+ else if (flow_ctrl & TG3_FLOW_CTRL_TX)
+ miireg = ADVERTISE_PAUSE_ASYM;
+ else if (flow_ctrl & TG3_FLOW_CTRL_RX)
+ miireg = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+ else
+ miireg = 0;
+
+ return miireg;
+}
+
+static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl)
+{
+ u16 miireg;
+
+ if ((flow_ctrl & TG3_FLOW_CTRL_TX) && (flow_ctrl & TG3_FLOW_CTRL_RX))
+ miireg = ADVERTISE_1000XPAUSE;
+ else if (flow_ctrl & TG3_FLOW_CTRL_TX)
+ miireg = ADVERTISE_1000XPSE_ASYM;
+ else if (flow_ctrl & TG3_FLOW_CTRL_RX)
+ miireg = ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM;
+ else
+ miireg = 0;
+
+ return miireg;
+}
+
static u8 tg3_resolve_flowctrl_1000T(u16 lcladv, u16 rmtadv)
{
u8 cap = 0;
@@ -1764,7 +1796,7 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
~(ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
- new_adv = (ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+ new_adv = ADVERTISE_CSMA;
if (tp->link_config.advertising & ADVERTISED_10baseT_Half)
new_adv |= ADVERTISE_10HALF;
if (tp->link_config.advertising & ADVERTISED_10baseT_Full)
@@ -1773,6 +1805,9 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
new_adv |= ADVERTISE_100HALF;
if (tp->link_config.advertising & ADVERTISED_100baseT_Full)
new_adv |= ADVERTISE_100FULL;
+
+ new_adv |= tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
+
tg3_writephy(tp, MII_ADVERTISE, new_adv);
if (tp->link_config.advertising &
@@ -1792,9 +1827,11 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
tg3_writephy(tp, MII_TG3_CTRL, 0);
}
} else {
+ new_adv = tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
+ new_adv |= ADVERTISE_CSMA;
+
/* Asking for a specific link mode. */
if (tp->link_config.speed == SPEED_1000) {
- new_adv = ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP;
tg3_writephy(tp, MII_ADVERTISE, new_adv);
if (tp->link_config.duplex == DUPLEX_FULL)
@@ -1805,11 +1842,7 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
new_adv |= (MII_TG3_CTRL_AS_MASTER |
MII_TG3_CTRL_ENABLE_AS_MASTER);
- tg3_writephy(tp, MII_TG3_CTRL, new_adv);
} else {
- tg3_writephy(tp, MII_TG3_CTRL, 0);
-
- new_adv = ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP;
if (tp->link_config.speed == SPEED_100) {
if (tp->link_config.duplex == DUPLEX_FULL)
new_adv |= ADVERTISE_100FULL;
@@ -1822,7 +1855,11 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
new_adv |= ADVERTISE_10HALF;
}
tg3_writephy(tp, MII_ADVERTISE, new_adv);
+
+ new_adv = 0;
}
+
+ tg3_writephy(tp, MII_TG3_CTRL, new_adv);
}
if (tp->link_config.autoneg == AUTONEG_DISABLE &&
@@ -2118,17 +2155,15 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
if (tg3_readphy(tp, MII_ADVERTISE, &local_adv))
local_adv = 0;
- local_adv &= (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
if (tg3_readphy(tp, MII_LPA, &remote_adv))
remote_adv = 0;
- remote_adv &= (LPA_PAUSE_CAP | LPA_PAUSE_ASYM);
-
- /* If we are not advertising full pause capability,
- * something is wrong. Bring the link down and reconfigure.
+ /* If we are not advertising what has been requested,
+ * bring the link down and reconfigure.
*/
- if (local_adv != ADVERTISE_PAUSE_CAP) {
+ if (local_adv !=
+ tg3_advert_flowctrl_1000T(tp->link_config.flowctrl)) {
current_link_up = 0;
} else {
tg3_setup_flow_control(tp, local_adv, remote_adv);
@@ -2973,8 +3008,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
ADVERTISE_1000XPSE_ASYM |
ADVERTISE_SLCT);
- /* Always advertise symmetric PAUSE just like copper */
- new_adv |= ADVERTISE_1000XPAUSE;
+ new_adv |= tg3_advert_flowctrl_1000X(tp->link_config.flowctrl);
if (tp->link_config.advertising & ADVERTISED_1000baseT_Half)
new_adv |= ADVERTISE_1000XHALF;
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists