[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <12022509302322-git-send-email-afleming@freescale.com>
Date: Tue, 5 Feb 2008 16:35:30 -0600
From: Andy Fleming <afleming@...escale.com>
To: jeff@...zik.org, netdev@...r.kernel.org
Cc: Andy Fleming <afleming@...escale.com>
Subject: [PATCH] Fix PHY Lib support for gianfar and ucc_geth
The PHY Lib now uses mutexes instead of spin_locks. ucc_geth
and gianfar both grab the locks in their mdio_reset functions,
so they need to use mutex_(un)lock instead. This was not caught
until someone tested it on an SMP system.
Signed-off-by: Andy Fleming <afleming@...escale.com>
---
drivers/net/gianfar_mii.c | 4 ++--
drivers/net/ucc_geth_mii.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
index 100bf41..6a647d9 100644
--- a/drivers/net/gianfar_mii.c
+++ b/drivers/net/gianfar_mii.c
@@ -127,7 +127,7 @@ int gfar_mdio_reset(struct mii_bus *bus)
struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
unsigned int timeout = PHY_INIT_TIMEOUT;
- spin_lock_bh(&bus->mdio_lock);
+ mutex_lock(&bus->mdio_lock);
/* Reset the management interface */
gfar_write(®s->miimcfg, MIIMCFG_RESET);
@@ -140,7 +140,7 @@ int gfar_mdio_reset(struct mii_bus *bus)
timeout--)
cpu_relax();
- spin_unlock_bh(&bus->mdio_lock);
+ mutex_unlock(&bus->mdio_lock);
if(timeout <= 0) {
printk(KERN_ERR "%s: The MII Bus is stuck!\n",
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index e3ba14a..c69e654 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -109,7 +109,7 @@ int uec_mdio_reset(struct mii_bus *bus)
struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
unsigned int timeout = PHY_INIT_TIMEOUT;
- spin_lock_bh(&bus->mdio_lock);
+ mutex_lock(&bus->mdio_lock);
/* Reset the management interface */
out_be32(®s->miimcfg, MIIMCFG_RESET_MANAGEMENT);
@@ -121,7 +121,7 @@ int uec_mdio_reset(struct mii_bus *bus)
while ((in_be32(®s->miimind) & MIIMIND_BUSY) && timeout--)
cpu_relax();
- spin_unlock_bh(&bus->mdio_lock);
+ mutex_unlock(&bus->mdio_lock);
if (timeout <= 0) {
printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name);
--
1.5.0.2.230.gfbe3d-dirty
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists