Linux version 2.6.24 (pavel@xemulnb) (gcc version 4.1.3 20070724 (prerelease) (SUSE Linux)) #22 SMP Tue Feb 5 20:09:11 MSK 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffce0e5 (usable) BIOS-e820: 00000000bffce0e5 - 00000000bfff0000 (reserved) BIOS-e820: 00000000bfff0000 - 00000000bffff000 (ACPI data) BIOS-e820: 00000000bffff000 - 00000000c0000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec86000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Warning only 4GB will be used. Use a HIGHMEM64G enabled kernel. 3200MB HIGHMEM available. 896MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00ff780] 000ff780 *************** **** WARNING: likely BIOS bug **** MTRRs don't cover all of memory, trimmed 786432 pages *************** update e820 for mtrr modified physical RAM map: modified: 0000000000000000 - 000000000009f800 (usable) modified: 000000000009f800 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 0000000040000000 (usable) modified: 0000000040000000 - 00000000bfff0000 (reserved) modified: 00000000bfff0000 - 00000000bffff000 (ACPI data) modified: 00000000bffff000 - 00000000c0000000 (ACPI NVS) modified: 00000000c0000000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000140000000 (usable) Warning only 4GB will be used. Use a HIGHMEM64G enabled kernel. 3200MB HIGHMEM available. 896MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00ff780] 000ff780 Entering add_active_range(0, 0, 1048576) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 1048576 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 1048576 On node 0 totalpages: 1048576 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 6400 pages used for memmap HighMem zone: 812800 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: SE7320EP20 APIC at: 0xFEE00000 Processor #0 15:4 APIC version 20 Processor #6 15:4 APIC version 20 I/O APIC #7 Version 32 at 0xFEC00000. I/O APIC #8 Version 32 at 0xFEC10000. Enabling APIC mode: Flat. Using 2 I/O APICs Processors: 2 Allocating PCI resources starting at 10100000 (gap: 10000000:00400000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384 Kernel command line: ro root=08:02 ignore_loglevel debug: ignoring loglevel setting. mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) mapped IOAPIC to ffff9000 (fec10000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 3192.350 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1011264k/4194304k available (1357k kernel code, 36260k reserved, 594k data, 168k init, 131072k highmem) virtual kernel memory layout: fixmap : 0xfffa0000 - 0xfffff000 ( 380 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc05f0000 - 0xc061a000 ( 168 kB) .data : 0xc055375e - 0xc05e8088 ( 594 kB) .text : 0xc0400000 - 0xc055375e (1357 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 6387.02 BogoMIPS (lpj=3193513) Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 15k freed CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01 Booting processor 1/6 ip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6383.16 BogoMIPS (lpj=3191582) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (24) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01 Total of 2 processors activated (12770.19 BogoMIPS). ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs net_namespace: 164 bytes NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4 PCI: Using configuration type 1 Setting up standard PCI resources SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Discovered primary peer bus ff [IRQ] PCI: Using IRQ router PIIX/ICH [8086/25a1] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19 PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 23 PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 18 PCI->APIC IRQ transform: 0000:00:1f.2[A] -> IRQ 18 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17 PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:04:02.0[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:04:03.0[A] -> IRQ 16 PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:1e.0 PCI: Cannot allocate resource region 0 of device 0000:00:1d.4 PCI: Cannot allocate resource region 0 of device 0000:00:1d.7 PCI: Cannot allocate resource region 0 of device 0000:02:00.0 PCI: Cannot allocate resource region 0 of device 0000:04:02.0 PCI: Cannot allocate resource region 2 of device 0000:04:02.0 PCI: Cannot allocate resource region 0 of device 0000:04:03.0 PCI: Failed to allocate mem resource #8:100000@10100000 for 0000:00:03.0 PCI: Failed to allocate mem resource #9:100000@10100000 for 0000:00:03.0 PCI: Failed to allocate mem resource #0:400@10100000 for 0000:00:1d.7 PCI: Failed to allocate mem resource #5:400@10100000 for 0000:00:1f.1 PCI: Failed to allocate mem resource #0:10@10100000 for 0000:00:1d.4 PCI: Bridge: 0000:00:02.0 Time: tsc clocksource has been installed. IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Failed to allocate mem resource #6:20000@0 for 0000:02:00.0 PCI: Failed to allocate mem resource #0:4000@0 for 0000:02:00.0 PCI: Bridge: 0000:00:03.0 IO window: d000-dfff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Failed to allocate mem resource #0:1000000@11000000 for 0000:04:02.0 PCI: Failed to allocate mem resource #6:20000@10100000 for 0000:04:02.0 PCI: Failed to allocate mem resource #0:20000@10100000 for 0000:04:03.0 PCI: Failed to allocate mem resource #2:1000@10100000 for 0000:04:02.0 PCI: Bridge: 0000:00:1e.0 IO window: e000-efff MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered highmem bounce pool size: 64 pages io scheduler noop registered io scheduler anticipatory registered (default) Boot video device is 0000:04:02.0 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A loop: module loaded Driver 'sd' needs updating - please use bus_type methods ata_piix 0000:00:1f.1: version 2.12 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 ata1.00: ATAPI: TEAC DV-516G, F4S6, max UDMA/33 ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM TEAC DV-516G F4S6 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 18 ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 18 ata4.00: ATA-7: ST3200826AS, 3.03, max UDMA/133 ata4.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5 sd 3:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 > sd 3:0:0:0: [sda] Attached SCSI disk serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 168k freed warning: process `kmodule' used the deprecated sysctl system call with 1.23. Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000: probe of 0000:04:03.0 failed with error -5 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 0000:02:00.0: unsupported chip type 0xe0 sky2: probe of 0000:02:00.0 failed with error -95 intel_rng: FWH not detected EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. warning: process `kudzu' used the deprecated sysctl system call with 1.23. warning: process `kudzu' used the deprecated sysctl system call with 1.49. warning: process `kudzu' used the deprecated sysctl system call with 1.49.