| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080228145136.GD3063@tuxdriver.com>
Date: Thu, 28 Feb 2008 09:51:36 -0500
From: "John W. Linville" <linville@...driver.com>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, linux-wireless@...r.kernel.org
Subject: pull request: wireless-2.6 2008-02-28
On Wed, Feb 27, 2008 at 11:51:10PM -0800, David Miller wrote:
> From: "John W. Linville" <linville@...driver.com>
> Date: Wed, 27 Feb 2008 20:41:25 -0500
>
> > Gordon Farquharson (1):
> > Fix b43 driver build for arm
>
> Please revert this change and resend your pull request.
>
> If file2alias doesn't work properly in a cross build environment, we
> don't fix it by crapping up mod_devalias.h with these silly align
> attribute annotations.
As you wish... :-)
---
This version drops the "Fix b43 drivers build for arm" patch, and adds a
one-line build fix for SSB-attached PCI cores (found on bcm47xx mips).
Dave,
Here are some fixes intended for 2.6.25. Please let me know if there
are problems!
Thanks,
John
P.S. This will create a merge conflict with the code I already
requested that you pull for net-2.6.26. The merge is easily resolved,
since it is two "comment block + single statement" additions at the
same place in the file. Just take both sets of changes, and order
the "Evalue antenna setup" group _after_ the "Send a signal to the
led" group. I have the conflict corrected in my wireless-testing
tree for reference if you need it.
---
Individual patches are available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-2.6/
---
The following changes since commit d9595a7b9c777d45a74774f1428c263a0a47f4c0:
David S. Miller (1):
[AF_KEY]: Fix oops by converting to proc_net_*().
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git master
Alexey Zaytsev (2):
Use a separate config option for the b43 pci to ssb bridge.
Don't build bcm43xx if SSB is static and b43 PCI-SSB bridge is enabled.
Aurelien Jarno (1):
SSB PCI core driver: use new SPROM data structure
Ivo van Doorn (4):
rt2x00: Fix antenna diversity
rt2x00: Add link tuner safe RX toggle states
rt2x00: Don't switch to antenna with low rssi
rt2x00: Fix rt2x00lib_reset_link_tuner()
Johannes Berg (2):
rndis_wlan: fix sparse warnings
mac80211: fix kmalloc vs. net_ratelimit
Masakazu Mokuno (1):
PS3: gelic: Link the wireless net_device structure to the corresponding device structure
Roland Dreier (1):
libertas: Remove unused exports
Sebastian Siewior (1):
gelic wireless driver needs WIRELESS_EXT support
drivers/net/Kconfig | 1 +
drivers/net/ps3_gelic_wireless.c | 1 +
drivers/net/wireless/b43/Kconfig | 1 +
drivers/net/wireless/b43legacy/Kconfig | 1 +
drivers/net/wireless/bcm43xx/Kconfig | 2 +-
drivers/net/wireless/libertas/cmd.c | 2 -
drivers/net/wireless/libertas/decl.h | 1 -
drivers/net/wireless/libertas/main.c | 17 -------
drivers/net/wireless/rndis_wlan.c | 14 +++---
drivers/net/wireless/rt2x00/rt2400pci.c | 6 ++-
drivers/net/wireless/rt2x00/rt2500pci.c | 6 ++-
drivers/net/wireless/rt2x00/rt2500usb.c | 6 ++-
drivers/net/wireless/rt2x00/rt2x00config.c | 8 ++-
drivers/net/wireless/rt2x00/rt2x00dev.c | 73 ++++++++++++++-------------
drivers/net/wireless/rt2x00/rt2x00reg.h | 2 +
drivers/net/wireless/rt2x00/rt61pci.c | 6 ++-
drivers/net/wireless/rt2x00/rt73usb.c | 6 ++-
drivers/ssb/Kconfig | 5 ++
drivers/ssb/Makefile | 2 +-
drivers/ssb/driver_pcicore.c | 2 +-
drivers/ssb/ssb_private.h | 4 +-
net/mac80211/ieee80211_sta.c | 7 ++-
22 files changed, 96 insertions(+), 77 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a20e72f..a0f0e60 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2368,6 +2368,7 @@ config GELIC_NET
config GELIC_WIRELESS
bool "PS3 Wireless support"
depends on GELIC_NET
+ select WIRELESS_EXT
help
This option adds the support for the wireless feature of PS3.
If you have the wireless-less model of PS3 or have no plan to
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 750d2a9..daf5aba 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2690,6 +2690,7 @@ int gelic_wl_driver_probe(struct gelic_card *card)
return -ENOMEM;
/* setup net_device structure */
+ SET_NETDEV_DEV(netdev, &card->dev->core);
gelic_wl_setup_netdev_ops(netdev);
/* setup some of net_device and register it */
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 1a2141d..8bc4bc4 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -32,6 +32,7 @@ config B43_PCI_AUTOSELECT
bool
depends on B43 && SSB_PCIHOST_POSSIBLE
select SSB_PCIHOST
+ select SSB_B43_PCI_BRIDGE
default y
# Auto-select SSB PCICORE driver, if possible
diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig
index 6745579..13c65fa 100644
--- a/drivers/net/wireless/b43legacy/Kconfig
+++ b/drivers/net/wireless/b43legacy/Kconfig
@@ -25,6 +25,7 @@ config B43LEGACY_PCI_AUTOSELECT
bool
depends on B43LEGACY && SSB_PCIHOST_POSSIBLE
select SSB_PCIHOST
+ select SSB_B43_PCI_BRIDGE
default y
# Auto-select SSB PCICORE driver, if possible
diff --git a/drivers/net/wireless/bcm43xx/Kconfig b/drivers/net/wireless/bcm43xx/Kconfig
index 0159701..afb8f43 100644
--- a/drivers/net/wireless/bcm43xx/Kconfig
+++ b/drivers/net/wireless/bcm43xx/Kconfig
@@ -1,6 +1,6 @@
config BCM43XX
tristate "Broadcom BCM43xx wireless support (DEPRECATED)"
- depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && EXPERIMENTAL
+ depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && (!SSB_B43_PCI_BRIDGE || SSB != y) && EXPERIMENTAL
select WIRELESS_EXT
select FW_LOADER
select HW_RANDOM
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index eab0203..b3c1acb 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1040,7 +1040,6 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
lbs_deb_leave(LBS_DEB_CMD);
return ret;
}
-EXPORT_SYMBOL_GPL(lbs_mesh_access);
int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan)
{
@@ -1576,7 +1575,6 @@ done:
lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret);
return ret;
}
-EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command);
/**
* @brief This function allocates the command buffer and link
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index aaacd9b..4e22341 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
int lbs_remove_card(struct lbs_private *priv);
int lbs_start_card(struct lbs_private *priv);
int lbs_stop_card(struct lbs_private *priv);
-int lbs_reset_device(struct lbs_private *priv);
void lbs_host_to_card_done(struct lbs_private *priv);
int lbs_update_channel(struct lbs_private *priv);
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 84fb49c..4d4e2f3 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1351,8 +1351,6 @@ done:
lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
return ret;
}
-EXPORT_SYMBOL_GPL(lbs_add_mesh);
-
static void lbs_remove_mesh(struct lbs_private *priv)
{
@@ -1372,7 +1370,6 @@ static void lbs_remove_mesh(struct lbs_private *priv)
free_netdev(mesh_dev);
lbs_deb_leave(LBS_DEB_MESH);
}
-EXPORT_SYMBOL_GPL(lbs_remove_mesh);
/**
* @brief This function finds the CFP in
@@ -1458,20 +1455,6 @@ void lbs_interrupt(struct lbs_private *priv)
}
EXPORT_SYMBOL_GPL(lbs_interrupt);
-int lbs_reset_device(struct lbs_private *priv)
-{
- int ret;
-
- lbs_deb_enter(LBS_DEB_MAIN);
- ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET,
- CMD_ACT_HALT, 0, 0, NULL);
- msleep_interruptible(10);
-
- lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
- return ret;
-}
-EXPORT_SYMBOL_GPL(lbs_reset_device);
-
static int __init lbs_init_module(void)
{
lbs_deb_enter(LBS_DEB_MAIN);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 8ce2ddf..d9460ae 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -228,9 +228,9 @@ struct NDIS_WLAN_BSSID_EX {
struct NDIS_802_11_SSID Ssid;
__le32 Privacy;
__le32 Rssi;
- enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
+ __le32 NetworkTypeInUse;
struct NDIS_802_11_CONFIGURATION Configuration;
- enum NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
+ __le32 InfrastructureMode;
u8 SupportedRates[NDIS_802_11_LENGTH_RATES_EX];
__le32 IELength;
u8 IEs[0];
@@ -279,11 +279,11 @@ struct RNDIS_CONFIG_PARAMETER_INFOBUFFER {
} __attribute__((packed));
/* these have to match what is in wpa_supplicant */
-enum { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP } wpa_alg;
-enum { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, CIPHER_WEP104 }
- wpa_cipher;
-enum { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE, KEY_MGMT_802_1X_NO_WPA,
- KEY_MGMT_WPA_NONE } wpa_key_mgmt;
+enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP };
+enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
+ CIPHER_WEP104 };
+enum wpa_key_mgmt { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE,
+ KEY_MGMT_802_1X_NO_WPA, KEY_MGMT_WPA_NONE };
/*
* private data
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index d6cba13..c69f85e 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -960,8 +960,12 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2400pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_ON_LINK:
+ rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ break;
case STATE_RADIO_RX_OFF:
- rt2400pci_toggle_rx(rt2x00dev, state);
+ case STATE_RADIO_RX_OFF_LINK:
+ rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index e874fdc..91e87b5 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1112,8 +1112,12 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2500pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_ON_LINK:
+ rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ break;
case STATE_RADIO_RX_OFF:
- rt2500pci_toggle_rx(rt2x00dev, state);
+ case STATE_RADIO_RX_OFF_LINK:
+ rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 4ca9730..638c3d2 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1001,8 +1001,12 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
rt2500usb_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_ON_LINK:
+ rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ break;
case STATE_RADIO_RX_OFF:
- rt2500usb_toggle_rx(rt2x00dev, state);
+ case STATE_RADIO_RX_OFF_LINK:
+ rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 72cfe00..07adc57 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -97,12 +97,16 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
libconf.ant.rx = rx;
libconf.ant.tx = tx;
+ if (rx == rt2x00dev->link.ant.active.rx &&
+ tx == rt2x00dev->link.ant.active.tx)
+ return;
+
/*
* Antenna setup changes require the RX to be disabled,
* else the changes will be ignored by the device.
*/
if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
- rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
/*
* Write new antenna setup to device and reset the link tuner.
@@ -116,7 +120,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
rt2x00dev->link.ant.active.tx = libconf.ant.tx;
if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
- rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
}
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index c4be2ac..0d51f47 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -61,11 +61,33 @@ EXPORT_SYMBOL_GPL(rt2x00lib_get_ring);
/*
* Link tuning handlers
*/
-static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
+void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
{
+ if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
+ /*
+ * Reset link information.
+ * Both the currently active vgc level as well as
+ * the link tuner counter should be reset. Resetting
+ * the counter is important for devices where the
+ * device should only perform link tuning during the
+ * first minute after being enabled.
+ */
rt2x00dev->link.count = 0;
rt2x00dev->link.vgc_level = 0;
+ /*
+ * Reset the link tuner.
+ */
+ rt2x00dev->ops->lib->reset_tuner(rt2x00dev);
+}
+
+static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
+{
+ /*
+ * Clear all (possibly) pre-existing quality statistics.
+ */
memset(&rt2x00dev->link.qual, 0, sizeof(rt2x00dev->link.qual));
/*
@@ -79,10 +101,7 @@ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
rt2x00dev->link.qual.rx_percentage = 50;
rt2x00dev->link.qual.tx_percentage = 50;
- /*
- * Reset the link tuner.
- */
- rt2x00dev->ops->lib->reset_tuner(rt2x00dev);
+ rt2x00lib_reset_link_tuner(rt2x00dev);
queue_delayed_work(rt2x00dev->hw->workqueue,
&rt2x00dev->link.work, LINK_TUNE_INTERVAL);
@@ -93,15 +112,6 @@ static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev)
cancel_delayed_work_sync(&rt2x00dev->link.work);
}
-void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
-{
- if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
- return;
-
- rt2x00lib_stop_link_tuner(rt2x00dev);
- rt2x00lib_start_link_tuner(rt2x00dev);
-}
-
/*
* Ring initialization
*/
@@ -260,19 +270,11 @@ static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev)
if (sample_a == sample_b)
return;
- if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) {
- if (sample_a > sample_b && rx == ANTENNA_B)
- rx = ANTENNA_A;
- else if (rx == ANTENNA_A)
- rx = ANTENNA_B;
- }
+ if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY)
+ rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
- if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) {
- if (sample_a > sample_b && tx == ANTENNA_B)
- tx = ANTENNA_A;
- else if (tx == ANTENNA_A)
- tx = ANTENNA_B;
- }
+ if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)
+ tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
rt2x00lib_config_antenna(rt2x00dev, rx, tx);
}
@@ -293,7 +295,7 @@ static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev)
* sample the rssi from the other antenna to make a valid
* comparison between the 2 antennas.
*/
- if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5)
+ if (abs(rssi_curr - rssi_old) < 5)
return;
rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE;
@@ -319,15 +321,15 @@ static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev)
rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY;
if (rt2x00dev->hw->conf.antenna_sel_rx == 0 &&
- rt2x00dev->default_ant.rx != ANTENNA_SW_DIVERSITY)
+ rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY;
if (rt2x00dev->hw->conf.antenna_sel_tx == 0 &&
- rt2x00dev->default_ant.tx != ANTENNA_SW_DIVERSITY)
+ rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY;
if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) &&
!(rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)) {
- rt2x00dev->link.ant.flags &= ~ANTENNA_MODE_SAMPLE;
+ rt2x00dev->link.ant.flags = 0;
return;
}
@@ -441,17 +443,18 @@ static void rt2x00lib_link_tuner(struct work_struct *work)
rt2x00dev->ops->lib->link_tuner(rt2x00dev);
/*
- * Evaluate antenna setup.
- */
- rt2x00lib_evaluate_antenna(rt2x00dev);
-
- /*
* Precalculate a portion of the link signal which is
* in based on the tx/rx success/failure counters.
*/
rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual);
/*
+ * Evaluate antenna setup, make this the last step since this could
+ * possibly reset some statistics.
+ */
+ rt2x00lib_evaluate_antenna(rt2x00dev);
+
+ /*
* Increase tuner counter, and reschedule the next link tuner run.
*/
rt2x00dev->link.count++;
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 8384212..b1915dc 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -85,6 +85,8 @@ enum dev_state {
STATE_RADIO_OFF,
STATE_RADIO_RX_ON,
STATE_RADIO_RX_OFF,
+ STATE_RADIO_RX_ON_LINK,
+ STATE_RADIO_RX_OFF_LINK,
STATE_RADIO_IRQ_ON,
STATE_RADIO_IRQ_OFF,
};
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index b31f0c2..e808db9 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1482,8 +1482,12 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
rt61pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_ON_LINK:
+ rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ break;
case STATE_RADIO_RX_OFF:
- rt61pci_toggle_rx(rt2x00dev, state);
+ case STATE_RADIO_RX_OFF_LINK:
+ rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 4d576ab..4fac2d4 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1208,8 +1208,12 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
rt73usb_disable_radio(rt2x00dev);
break;
case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_ON_LINK:
+ rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+ break;
case STATE_RADIO_RX_OFF:
- rt73usb_toggle_rx(rt2x00dev, state);
+ case STATE_RADIO_RX_OFF_LINK:
+ rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index 78fd331..adea792 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -35,6 +35,11 @@ config SSB_PCIHOST
If unsure, say Y
+config SSB_B43_PCI_BRIDGE
+ bool
+ depends on SSB_PCIHOST
+ default n
+
config SSB_PCMCIAHOST_POSSIBLE
bool
depends on SSB && (PCMCIA = y || PCMCIA = SSB) && EXPERIMENTAL
diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile
index e235144..de94c2e 100644
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -14,6 +14,6 @@ ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
# b43 pci-ssb-bridge driver
# Not strictly a part of SSB, but kept here for convenience
-ssb-$(CONFIG_SSB_PCIHOST) += b43_pci_bridge.o
+ssb-$(CONFIG_SSB_B43_PCI_BRIDGE) += b43_pci_bridge.o
obj-$(CONFIG_SSB) += ssb.o
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 6d99a98..07ab48d 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -393,7 +393,7 @@ static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
chipid_top != 0x5300)
return 0;
- if (bus->sprom.r1.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
+ if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
return 0;
/* The 200-pin BCM4712 package does not bond out PCI. Even when
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index a789364..21eca2b 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -120,10 +120,10 @@ extern int ssb_devices_thaw(struct ssb_bus *bus);
extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
/* b43_pci_bridge.c */
-#ifdef CONFIG_SSB_PCIHOST
+#ifdef CONFIG_SSB_B43_PCI_BRIDGE
extern int __init b43_pci_ssb_bridge_init(void);
extern void __exit b43_pci_ssb_bridge_exit(void);
-#else /* CONFIG_SSB_PCIHOST */
+#else /* CONFIG_SSB_B43_PCI_BRIDGR */
static inline int b43_pci_ssb_bridge_init(void)
{
return 0;
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 2019b4f..9aeed53 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -1116,9 +1116,10 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev,
/* prepare reordering buffer */
tid_agg_rx->reorder_buf =
kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
- if ((!tid_agg_rx->reorder_buf) && net_ratelimit()) {
- printk(KERN_ERR "can not allocate reordering buffer "
- "to tid %d\n", tid);
+ if (!tid_agg_rx->reorder_buf) {
+ if (net_ratelimit())
+ printk(KERN_ERR "can not allocate reordering buffer "
+ "to tid %d\n", tid);
goto end;
}
memset(tid_agg_rx->reorder_buf, 0,
--
John W. Linville
linville@...driver.com
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists