lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20080307134312.037e2cf6@extreme>
Date:	Fri, 7 Mar 2008 13:43:12 -0800
From:	Stephen Hemminger <shemminger@...tta.com>
To:	Kieran Mansley <kmansley@...arflare.com>,
	Jeff Garzik <jgarzik@...ox.com>
Cc:	netdev@...r.kernel.org
Subject: [PATCH] ethtool: command line support for lro

Add lro support to command in similar manner to TSO, GSO, etc.
The file ethtool-copy.h is updated to be sanitised version of
ethtool.h from 2.6.25-rc4 (ie make headers_install)

Not tested on actual LRO hardware.

Signed-off-by: Stephen Hemminger <shemminger@...tta.com>

---
 ethtool-copy.h |  134 +++++++------------------------------------------------
 ethtool.c      |   51 +++++++++++++++++++---
 2 files changed, 62 insertions(+), 123 deletions(-)

diff --git a/ethtool-copy.h b/ethtool-copy.h
index 3a63224..87c7c9a 100644
--- a/ethtool-copy.h
+++ b/ethtool-copy.h
@@ -39,7 +39,8 @@ struct ethtool_drvinfo {
 	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
 				/* For PCI devices, use pci_name(pci_dev). */
 	char	reserved1[32];
-	char	reserved2[16];
+	char	reserved2[12];
+	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
 	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
 	__u32	testinfo_len;
 	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
@@ -219,6 +220,7 @@ struct ethtool_pauseparam {
 enum ethtool_stringset {
 	ETH_SS_TEST		= 0,
 	ETH_SS_STATS,
+	ETH_SS_PRIV_FLAGS,
 };
 
 /* for passing string sets for data tagging */
@@ -256,125 +258,19 @@ struct ethtool_perm_addr {
 	__u8	data[0];
 };
 
-#ifdef __KERNEL__
-
-struct net_device;
-
-/* Some generic methods drivers may use in their ethtool_ops */
-u32 ethtool_op_get_link(struct net_device *dev);
-u32 ethtool_op_get_tx_csum(struct net_device *dev);
-int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
-int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data);
-int ethtool_op_set_tx_ipv6_csum(struct net_device *dev, u32 data);
-u32 ethtool_op_get_sg(struct net_device *dev);
-int ethtool_op_set_sg(struct net_device *dev, u32 data);
-u32 ethtool_op_get_tso(struct net_device *dev);
-int ethtool_op_set_tso(struct net_device *dev, u32 data);
-int ethtool_op_get_perm_addr(struct net_device *dev, 
-			     struct ethtool_perm_addr *addr, u8 *data);
-u32 ethtool_op_get_ufo(struct net_device *dev);
-int ethtool_op_set_ufo(struct net_device *dev, u32 data);
-
-/**
- * &ethtool_ops - Alter and report network device settings
- * get_settings: Get device-specific settings
- * set_settings: Set device-specific settings
- * get_drvinfo: Report driver information
- * get_regs: Get device registers
- * get_wol: Report whether Wake-on-Lan is enabled
- * set_wol: Turn Wake-on-Lan on or off
- * get_msglevel: Report driver message level
- * set_msglevel: Set driver message level
- * nway_reset: Restart autonegotiation
- * get_link: Get link status
- * get_eeprom: Read data from the device EEPROM
- * set_eeprom: Write data to the device EEPROM
- * get_coalesce: Get interrupt coalescing parameters
- * set_coalesce: Set interrupt coalescing parameters
- * get_ringparam: Report ring sizes
- * set_ringparam: Set ring sizes
- * get_pauseparam: Report pause parameters
- * set_pauseparam: Set pause paramters
- * get_rx_csum: Report whether receive checksums are turned on or off
- * set_rx_csum: Turn receive checksum on or off
- * get_tx_csum: Report whether transmit checksums are turned on or off
- * set_tx_csum: Turn transmit checksums on or off
- * get_sg: Report whether scatter-gather is enabled
- * set_sg: Turn scatter-gather on or off
- * get_tso: Report whether TCP segmentation offload is enabled
- * set_tso: Turn TCP segmentation offload on or off
- * get_ufo: Report whether UDP fragmentation offload is enabled
- * set_ufo: Turn UDP fragmentation offload on or off
- * self_test: Run specified self-tests
- * get_strings: Return a set of strings that describe the requested objects 
- * phys_id: Identify the device
- * get_stats: Return statistics about the device
- * get_perm_addr: Gets the permanent hardware address
- * 
- * Description:
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present.  When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
  *
- * get_settings:
- *	@get_settings is passed an &ethtool_cmd to fill in.  It returns
- *	an negative errno or zero.
- *
- * set_settings:
- *	@set_settings is passed an &ethtool_cmd and should attempt to set
- *	all the settings this device supports.  It may return an error value
- *	if something goes wrong (otherwise 0).
- *
- * get_eeprom:
- *	Should fill in the magic field.  Don't need to check len for zero
- *	or wraparound.  Fill in the data argument with the eeprom values
- *	from offset to offset + len.  Update len to the amount read.
- *	Returns an error or zero.
- *
- * set_eeprom:
- *	Should validate the magic field.  Don't need to check len for zero
- *	or wraparound.  Update len to the amount written.  Returns an error
- *	or zero.
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
  */
-struct ethtool_ops {
-	int	(*get_settings)(struct net_device *, struct ethtool_cmd *);
-	int	(*set_settings)(struct net_device *, struct ethtool_cmd *);
-	void	(*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
-	int	(*get_regs_len)(struct net_device *);
-	void	(*get_regs)(struct net_device *, struct ethtool_regs *, void *);
-	void	(*get_wol)(struct net_device *, struct ethtool_wolinfo *);
-	int	(*set_wol)(struct net_device *, struct ethtool_wolinfo *);
-	u32	(*get_msglevel)(struct net_device *);
-	void	(*set_msglevel)(struct net_device *, u32);
-	int	(*nway_reset)(struct net_device *);
-	u32	(*get_link)(struct net_device *);
-	int	(*get_eeprom_len)(struct net_device *);
-	int	(*get_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
-	int	(*set_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
-	int	(*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
-	int	(*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
-	void	(*get_ringparam)(struct net_device *, struct ethtool_ringparam *);
-	int	(*set_ringparam)(struct net_device *, struct ethtool_ringparam *);
-	void	(*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
-	int	(*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
-	u32	(*get_rx_csum)(struct net_device *);
-	int	(*set_rx_csum)(struct net_device *, u32);
-	u32	(*get_tx_csum)(struct net_device *);
-	int	(*set_tx_csum)(struct net_device *, u32);
-	u32	(*get_sg)(struct net_device *);
-	int	(*set_sg)(struct net_device *, u32);
-	u32	(*get_tso)(struct net_device *);
-	int	(*set_tso)(struct net_device *, u32);
-	int	(*self_test_count)(struct net_device *);
-	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
-	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
-	int	(*phys_id)(struct net_device *, u32);
-	int	(*get_stats_count)(struct net_device *);
-	void	(*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *);
-	int	(*get_perm_addr)(struct net_device *, struct ethtool_perm_addr *, u8 *);
-	int	(*begin)(struct net_device *);
-	void	(*complete)(struct net_device *);
-	u32     (*get_ufo)(struct net_device *);
-	int     (*set_ufo)(struct net_device *, u32);
+enum ethtool_flags {
+	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
 };
-#endif /* __KERNEL__ */
+
 
 /* CMDs currently supported */
 #define ETHTOOL_GSET		0x00000001 /* Get settings. */
@@ -414,6 +310,10 @@ struct ethtool_ops {
 #define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
 #define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
 #define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
diff --git a/ethtool.c b/ethtool.c
index a668b49..8a063fa 100644
--- a/ethtool.c
+++ b/ethtool.c
@@ -151,7 +151,9 @@ static struct option {
 		"		[ sg on|off ]\n"
 	        "		[ tso on|off ]\n"
 	        "		[ ufo on|off ]\n"
-	        "		[ gso on|off ]\n" },
+	        "		[ gso on|off ]\n"
+                "               [ lro on|off ]\n"
+    },
     { "-i", "--driver", MODE_GDRV, "Show driver information" },
     { "-d", "--register-dump", MODE_GREGS, "Do a register dump",
 		"		[ raw on|off ]\n"
@@ -200,6 +202,7 @@ static int off_sg_wanted = -1;
 static int off_tso_wanted = -1;
 static int off_ufo_wanted = -1;
 static int off_gso_wanted = -1;
+static int off_lro_wanted = -1;
 
 static struct ethtool_pauseparam epause;
 static int gpause_changed = 0;
@@ -310,6 +313,7 @@ static struct cmdline_info cmdline_offload[] = {
 	{ "tso", CMDL_BOOL, &off_tso_wanted, NULL },
 	{ "ufo", CMDL_BOOL, &off_ufo_wanted, NULL },
 	{ "gso", CMDL_BOOL, &off_gso_wanted, NULL },
+	{ "lro", CMDL_BOOL, &off_lro_wanted, NULL },
 };
 
 static struct cmdline_info cmdline_pause[] = {
@@ -1217,7 +1221,7 @@ static int dump_coalesce(void)
 	return 0;
 }
 
-static int dump_offload (int rx, int tx, int sg, int tso, int ufo, int gso)
+static int dump_offload (int rx, int tx, int sg, int tso, int ufo, int gso, int lro)
 {
 	fprintf(stdout,
 		"rx-checksumming: %s\n"
@@ -1225,13 +1229,15 @@ static int dump_offload (int rx, int tx, int sg, int tso, int ufo, int gso)
 		"scatter-gather: %s\n"
 		"tcp segmentation offload: %s\n"
 		"udp fragmentation offload: %s\n"
-		"generic segmentation offload: %s\n",
+		"generic segmentation offload: %s\n"
+		"large receive offload: %s\n",
 		rx ? "on" : "off",
 		tx ? "on" : "off",
 		sg ? "on" : "off",
 		tso ? "on" : "off",
 		ufo ? "on" : "off",
-		gso ? "on" : "off");
+		gso ? "on" : "off",
+		lro ? "on" : "off");
 
 	return 0;
 }
@@ -1495,7 +1501,8 @@ static int do_scoalesce(int fd, struct ifreq *ifr)
 static int do_goffload(int fd, struct ifreq *ifr)
 {
 	struct ethtool_value eval;
-	int err, allfail = 1, rx = 0, tx = 0, sg = 0, tso = 0, ufo = 0, gso = 0;
+	int err, allfail = 1, rx = 0, tx = 0, sg = 0;
+	int tso = 0, ufo = 0, gso = 0, lro = 0;
 
 	fprintf(stdout, "Offload parameters for %s:\n", devname);
 
@@ -1559,12 +1566,20 @@ static int do_goffload(int fd, struct ifreq *ifr)
 		allfail = 0;
 	}
 
+	eval.cmd = ETHTOOL_GFLAGS;
+	ifr->ifr_data = (caddr_t)&eval;
+	err = ioctl(fd, SIOCETHTOOL, ifr);
+	if (!err) {
+		lro = eval.data & ETH_FLAG_LRO;
+		allfail = 0;
+	}
+
 	if (allfail) {
 		fprintf(stdout, "no offload info available\n");
 		return 83;
 	}
 
-	return dump_offload(rx, tx, sg, tso, ufo, gso);
+	return dump_offload(rx, tx, sg, tso, ufo, gso, lro);
 }
 
 static int do_soffload(int fd, struct ifreq *ifr)
@@ -1641,6 +1656,30 @@ static int do_soffload(int fd, struct ifreq *ifr)
 			return 90;
 		}
 	}
+	if (off_lro_wanted >= 0) {
+		changed = 1;
+		eval.cmd = ETHTOOL_GFLAGS;
+		eval.data = 0;
+		ifr->ifr_data = (caddr_t)&eval;
+		err = ioctl(fd, SIOCETHTOOL, ifr);
+		if (err) {
+			perror("Cannot get device flag settings");
+			return 90;
+		}
+
+		eval.cmd = ETHTOOL_SFLAGS;
+		if (off_lro_wanted == 1)
+			eval.data |= ETH_FLAG_LRO;
+		else
+			eval.data &= ~ETH_FLAG_LRO;
+			
+		err = ioctl(fd, SIOCETHTOOL, ifr);
+		if (err) {
+			perror("Cannot set large receive offload settings");
+			return 90;
+		}
+	}		
+
 	if (!changed) {
 		fprintf(stdout, "no offload settings changed\n");
 	}
-- 
1.5.4.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ