netdev - [PATCH] Re: ep93xx

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20080321202202.129c1239@ors>
Date:	Fri, 21 Mar 2008 20:22:02 +0100
From:	Oliver Martin <oliver.martin@...dent.tuwien.ac.at>
To:	Oliver Martin <oliver.martin@...dent.tuwien.ac.at>
Cc:	netdev@...r.kernel.org, hvr@....org, buytenh@...tstofly.org
Subject: [PATCH] Re: ep93xx_eth PHY problems

Am Tue, 04 Mar 2008 14:02:15 +0100
schrieb Oliver Martin <oliver.martin@...dent.tuwien.ac.at>:
> 
> Now I'm having different problems: When auto-negotiation is enabled,
> it sometimes randomly changes the link state:
> 
> PHY: 0:01 - Link is Down
> PHY: 0:01 - Link is Up - 100/Full
> 

I've found at least one part of the problem. The MDIO clock divisor
wasn't set again after the reset in ep93xx_start_hw. It was left at the
default, resulting in a 12.5 MHz clock, which the PHY (Micrel KSZ8721BL)
didn't like too much. Calling ep93xx_mdio_reset after the reset fixed
it, the link is now perfectly stable in auto-negotiation mode.

There still seems to be another bug with auto-negotiation disabled: It
doesn't switch to 1000 Mbps any more, but most times it doesn't stay in
the intended configuration either. I haven't done any extensive
testing of this yet, though.

Signed-off-by: Oliver Martin <oliver.martin@...dent.tuwien.ac.at>

--- linux-2.6.24-phy/drivers/net/arm/ep93xx_eth.c.orig	2008-03-19 15:18:29.000000000 +0100
+++ linux-2.6.24-phy/drivers/net/arm/ep93xx_eth.c	2008-03-19 15:43:44.000000000 +0100
@@ -535,6 +535,22 @@ err:
 	return 1;
 }
 
+static int ep93xx_mdio_reset(struct mii_bus *bus)
+{
+	struct ep93xx_priv *ep = bus->priv;
+
+	u32 selfctl = rdl(ep, REG_SELFCTL);
+
+	selfctl &= ~(REG_SELFCTL_MDCDIV_MSK | REG_SELFCTL_PSPRS);
+
+	selfctl |= (ep->mdc_divisor - 1) << REG_SELFCTL_MDCDIV_OFS;
+	selfctl |= REG_SELFCTL_PSPRS;
+
+	wrl(ep, REG_SELFCTL, selfctl);
+
+	return 0;
+}
+
 static int ep93xx_start_hw(struct net_device *dev)
 {
 	struct ep93xx_priv *ep = netdev_priv(dev);
@@ -553,6 +569,9 @@ static int ep93xx_start_hw(struct net_de
 		return 1;
 	}
 
+	/* The reset cleared REG_SELFCTL, so set the MDC divisor again */
+	ep93xx_mdio_reset(&ep->mii_bus);
+
 	/* Receive descriptor ring.  */
 	addr = ep->descs_dma_addr + offsetof(struct ep93xx_descs, rdesc);
 	wrl(ep, REG_RXDQBADD, addr);
@@ -776,22 +795,6 @@ static int ep93xx_mdio_write(struct mii_
 	return 0;
 }
 
-static int ep93xx_mdio_reset(struct mii_bus *bus)
-{
-	struct ep93xx_priv *ep = bus->priv;
-
-	u32 selfctl = rdl(ep, REG_SELFCTL);
-
-	selfctl &= ~(REG_SELFCTL_MDCDIV_MSK | REG_SELFCTL_PSPRS);
-
-	selfctl |= (ep->mdc_divisor - 1) << REG_SELFCTL_MDCDIV_OFS;
-	selfctl |= REG_SELFCTL_PSPRS;
-
-	wrl(ep, REG_SELFCTL, selfctl);
-
-	return 0;
-}
-
 
 static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
 {
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html