Message-Id: <1209205136.2929.6.camel@localhost.localdomain>
Date:	Sat, 26 Apr 2008 12:18:56 +0200
From:	"H. Willstrand" <h.willstrand@...il.com>
To:	"M. Istehbab" <hariskhan@...il.com>
Cc:	netdev@...r.kernel.org
Subject: Re: TCP connection failure in kernel 2.6.25


On Sat, 2008-04-26 at 14:17 +0500, M. Istehbab wrote:
> Package: linux-image-2.6.24-1-686
> Version: 2.6.24-6
> Severity: critical
> 
> I have tried it with kernels from debian between 2.6.18-5-686 -
> 2.6.25. Be it vanilla versions/sources from kernel.org or debian built
> kernels. I have the same issue.
> 
> The problem is random TCP connection failure for ipv4.
> 
> I have seen a severe issue of this problem in my transparent proxy
> setup. This problem also occurs at times when it is not redirecting
> traffic, rather accepting it
> directly. Increasing the number of file descriptors didn't help. I
> rebuilt the kernel with 65K file descriptors, still the problem
> persists.
> 
> Even if it is one client behind squid or this box, this happens. It
> will at random, not accept connections. squid doesn't report any in
> the log. netstat doesn't show any
> in its output as well.
> 

Is the proxy server accepting connections after the issue has occurred?
Or do you need to re-boot? Or do you have to wait for a number of
seconds or what?

Cheers,
H. Willstrand

> I have changed NICs, I have changed between squid versions from 2.x to
> 3.x. Nothing has helped.
> 
> Following are some settings to mention;
> 
> ulimit -n is set to 8000
> net.core.somaxconn = 1024
> net.core.netdev_max_backlog = 3000
> net.ipv4.tcp_max_syn_backlog = 3000
> 
> squid is built with 8000 file descriptors.
> 
> This is a 60 client LAN behind this box, using it as an internet
> gateway/firewall for the following traffic;
> 
> 1) vpn
> 2) email
> 3) cvs
> 4) browsing (http/https)
> 5) some ftp
> 
> /////////////////////////////////////////////////////////////////////////////////////////
> 
> This is a PIII (Coppermine)
> cpu MHz         : 864.499
> RAM             : 1 GB
> Hard disk       : 2x 36 GB SCSI hard drives
> RAID            : raid1
> Non Raid part   : 3 non raid partitions
> 
> /////////////////////////////////////////////////////////////////////////////////////////
> 
> # cat /proc/mst
> cat: /proc/mst: No such file or directory
> sglhrcvs:~/work/traffic-shaping# cat /proc/mdstat
> Personalities : [raid1]
> md0 : active raid1 sda1[0] sdb1[1]
>      32226240 blocks [2/2] [UU]
> 
> 
> unused devices: <none>
> 
> /////////////////////////////////////////////////////////////////////////////////////////
> 
> This box worked fine when it had RHEL WS3 on it.
> 
> 
> -- Package-specific info:
> ** Version:
> Linux version 2.6.24-1-686 (Debian 2.6.24-6) (waldi@...ian.org) (gcc
> version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Sat Apr
> 19 00:37:55 UTC 2008
> 
> ** Command line:
> root=/dev/md0 ro
> 
> process `sysctl' is using deprecated sysctl (syscall)
> net.ipv6.neigh.default.retrans_time; Use
> net.ipv6.neigh.default.retrans_time_ms instead.
> 
> ** Loaded modules:
> Module                  Size  Used by
> cls_u32                 8100  1
> sch_cbq                16352  1
> tcp_diag                1792  0
> inet_diag              12136  1 tcp_diag
> xt_limit                2656  1
> xt_state                2464  1
> ipt_REDIRECT            2080  3
> ipt_MASQUERADE          3776  3
> xt_MARK                 2272  11
> iptable_nat             6916  1
> nf_nat                 18316  3 ipt_REDIRECT,ipt_MASQUERADE,iptable_nat
> nf_conntrack_ipv4      17352  3 iptable_nat
> nf_conntrack           62272  5
> xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
> iptable_filter          2976  1
> ppdev                   8804  0
> lp                     11076  0
> ac                      6116  0
> battery                13572  0
> xt_TCPMSS               4384  1
> xt_tcpmss               2240  1
> xt_tcpudp               3136  29
> iptable_mangle          2784  1
> ip_tables              13188  3 iptable_nat,iptable_filter,iptable_mangle
> x_tables               14244  10
> xt_limit,xt_state,ipt_REDIRECT,ipt_MASQUERADE,xt_MARK,iptable_nat,xt_TCPMSS,xt_tcpmss,xt_tcpudp,ip_tables
> pppoe                  12864  0
> pppox                   3980  1 pppoe
> ppp_generic            26196  2 pppoe,pppox
> slhc                    5920  1 ppp_generic
> ipv6                  240836  35
> dm_snapshot            16964  0
> dm_mirror              21600  0
> dm_mod                 55812  2 dm_snapshot,dm_mirror
> loop                   16804  0
> parport_pc             33668  1
> parport                34280  3 ppdev,lp,parport_pc
> floppy                 54628  0
> rtc                    13052  0
> psmouse                36464  0
> pcspkr                  3200  0
> i2c_i801                9232  0
> i2c_core               22432  1 i2c_i801
> button                  8432  0
> serio_raw               6660  0
> shpchp                 31028  0
> intel_agp              23412  1
> agpgart                31688  1 intel_agp
> pci_hotplug            27712  1 shpchp
> intel_rng               5632  0
> iTCO_wdt               11268  0
> evdev                  11104  1
> sg                     33264  0
> sr_mod                 16708  0
> cdrom                  32512  1 sr_mod
> ext3                  122888  3
> jbd                    43732  1 ext3
> mbcache                 8288  1 ext3
> raid1                  22240  1
> md_mod                 73716  2 raid1
> ide_generic             1280  0 [permanent]
> sd_mod                 27200  7
> aic7xxx               157560  5
> scsi_transport_spi     22816  1 aic7xxx
> ata_generic             7428  0
> libata                144464  1 ata_generic
> scsi_mod              141164  6
> sg,sr_mod,sd_mod,aic7xxx,scsi_transport_spi,libata
> generic                 4388  0 [permanent]
> 3c59x                  41064  0
> e100                   33836  0
> mii                     5312  2 3c59x,e100
> piix                    7492  0 [permanent]
> uhci_hcd               23376  0
> ide_core              108292  3 ide_generic,generic,piix
> usbcore               132940  2 uhci_hcd
> thermal                16028  0
> processor              36520  1 thermal
> fan                     4772  0
> 
> ** PCI devices:
> 00:00.0 Host bridge [0600]: Intel Corporation 82840 840 (Carmel)
> Chipset Host Bridge (Hub A) [8086:1a21] (rev 01)
>        Subsystem: Dell Unknown device [1028:0096]
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR+
>        Latency: 0
>        Region 0: Memory at ec000000 (32-bit, prefetchable) [size=32M]
>        Capabilities: [a0] AGP version 2.0
>                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
> FW- Rate=<none>
> 
> 00:01.0 PCI bridge [0604]: Intel Corporation 82840 840 (Carmel)
> Chipset AGP Bridge [8086:1a23] (rev 01) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64
>        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>        Memory behind bridge: f4000000-fbffffff
>        Prefetchable memory behind bridge: 50000000-500fffff
>        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
> 
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge
> [8086:2418] (rev 02) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Bus: primary=00, secondary=02, subordinate=03, sec-latency=64
>        I/O behind bridge: 0000e000-0000ffff
>        Memory behind bridge: f0000000-f3ffffff
>        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> 
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC)
> [8086:2410] (rev 02)
>        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
> 
> 00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE
> [8086:2411] (rev 02) (prog-if 80 [Master])
>        Subsystem: Intel Corporation 82801AA IDE [8086:2411]
>        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Region 0: [virtual] Memory at 000001f0 (32-bit,
> non-prefetchable) [disabled] [size=8]
>        Region 1: [virtual] Memory at 000003f0 (type 3,
> non-prefetchable) [disabled] [size=1]
>        Region 2: [virtual] Memory at 00000170 (32-bit,
> non-prefetchable) [disabled] [size=8]
>        Region 3: [virtual] Memory at 00000370 (type 3,
> non-prefetchable) [disabled] [size=1]
>        Region 4: I/O ports at 1020 [size=16]
> 
> 00:1f.2 USB Controller [0c03]: Intel Corporation 82801AA USB
> [8086:2412] (rev 02) (prog-if 00 [UHCI])
>        Subsystem: Intel Corporation 82801AA USB [8086:2412]
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin D routed to IRQ 16
>        Region 4: I/O ports at 1000 [size=32]
> 
> 00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus [8086:2413] (rev 02)
>        Subsystem: Intel Corporation 82801AA SMBus [8086:2413]
>        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Interrupt: pin B routed to IRQ 18
>        Region 4: I/O ports at dcd0 [size=16]
> 
> 01:00.0 VGA compatible controller [0300]: S3 Inc. 86c368 [Trio 3D/2X]
> [5333:8a13] (rev 02) (prog-if 00 [VGA])
>        Subsystem: S3 Inc. Trio3D/2X [5333:8a13]
>        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
>        Expansion ROM at 50000000 [disabled] [size=64K]
>        Capabilities: [dc] Power Management version 1
>                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [80] AGP version 1.0
>                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
> HTrans- 64bit- FW- AGP3- Rate=x1,x2
>                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x2
> 
> 02:04.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M
> [Tornado] [10b7:9200] (rev 78)
>        Subsystem: Dell Unknown device [1028:0096]
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
>        Interrupt: pin A routed to IRQ 17
>        Region 0: I/O ports at ec80 [size=128]
>        Region 1: Memory at f0fffc00 (32-bit, non-prefetchable) [size=128]
>        Expansion ROM at f0200000 [disabled] [size=128K]
>        Capabilities: [dc] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> 
> 02:06.0 Multimedia audio controller [0401]: Cirrus Logic CS 4614/22/24
> [CrystalClear SoundFusion Audio Accelerator] [1013:6003] (rev 01)
>        Subsystem: Dell Unknown device [1028:0096]
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (1000ns min, 6000ns max)
>        Interrupt: pin A routed to IRQ 9
>        Region 0: Memory at f0ffe000 (32-bit, non-prefetchable) [size=4K]
>        Region 1: Memory at f0e00000 (32-bit, non-prefetchable) [size=1M]
>        Capabilities: [40] Power Management version 2
>                Flags: PMEClk+ DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> 02:08.0 Ethernet controller [0200]: Intel Corporation 82557/8/9
> [Ethernet Pro 100] [8086:1229] (rev 05)
>        Subsystem: IBM 82558B Ethernet Pro 10/100 [1014:005c]
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
>        Interrupt: pin A routed to IRQ 17
>        Region 0: Memory at ee000000 (32-bit, prefetchable) [size=4K]
>        Region 1: I/O ports at ec60 [size=32]
>        Region 2: Memory at f0d00000 (32-bit, non-prefetchable) [size=1M]
>        Expansion ROM at f0000000 [disabled] [size=1M]
>        Capabilities: [dc] Power Management version 1
>                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> 02:09.0 Ethernet controller [0200]: Intel Corporation 82557/8/9
> [Ethernet Pro 100] [8086:1229] (rev 0c)
>        Subsystem: Intel Corporation EtherExpress PRO/100 S Desktop
> Adapter [8086:0040]
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
>        Interrupt: pin A routed to IRQ 18
>        Region 0: Memory at f0ffd000 (32-bit, non-prefetchable) [size=4K]
>        Region 1: I/O ports at ec00 [size=64]
>        Region 2: Memory at f0fc0000 (32-bit, non-prefetchable) [size=128K]
>        Expansion ROM at f0240000 [disabled] [size=64K]
>        Capabilities: [dc] Power Management version 2
>                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> 
> 02:0b.0 Ethernet controller [0200]: 3Com Corporation 3c905B 100BaseTX
> [Cyclone] [10b7:9055] (rev 24)
>        Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 [10b7:9055]
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
>        Interrupt: pin A routed to IRQ 16
>        Region 0: I/O ports at e880 [size=128]
>        Region 1: Memory at f0fff800 (32-bit, non-prefetchable) [size=128]
>        Expansion ROM at f0220000 [disabled] [size=128K]
>        Capabilities: [dc] Power Management version 1
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1+,D2+,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> 02:0e.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152
> [1011:0024] (rev 03) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64, Cache Line Size: 32 bytes
>        Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
>        I/O behind bridge: 0000f000-0000ffff
>        Memory behind bridge: f2000000-f3ffffff
>        Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff
>        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>        Capabilities: [dc] Power Management version 1
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>                Bridge: PM- B3+
> 
> 03:0a.0 SCSI storage controller [0100]: Adaptec AIC-7899P U160/m
> [9005:00cf] (rev 01)
>        Subsystem: Dell Unknown device [1028:0096]
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 32 bytes
>        Interrupt: pin A routed to IRQ 19
>        BIST result: 00
>        Region 0: I/O ports at fc00 [disabled] [size=256]
>        Region 1: Memory at f2fff000 (64-bit, non-prefetchable) [size=4K]
>        Expansion ROM at f3000000 [disabled] [size=128K]
>        Capabilities: [dc] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> 03:0a.1 SCSI storage controller [0100]: Adaptec AIC-7899P U160/m
> [9005:00cf] (rev 01)
>        Subsystem: Dell Unknown device [1028:0096]
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 32 bytes
>        Interrupt: pin B routed to IRQ 16
>        BIST result: 00
>        Region 0: I/O ports at f800 [disabled] [size=256]
>        Region 1: Memory at f2ffe000 (64-bit, non-prefetchable) [size=4K]
>        Expansion ROM at f0100000 [disabled] [size=128K]
>        Capabilities: [dc] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> 
> 
> -- System Information:
> Debian Release: 4.0
>  APT prefers stable
>  APT policy: (500, 'stable')
> Architecture: i386 (i686)
> Shell:  /bin/sh linked to /bin/bash
> Kernel: Linux 2.6.24-1-686
> Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
> 
> Versions of packages linux-image-2.6.24-1-686 depends on:
> ii  debconf [debconf-2.0]        1.5.11etch1 Debian configuration management sy
> ii  initramfs-tools [linux-initr 0.85h       tools for generating an initramfs
> ii  module-init-tools            3.3-pre4-2  tools for managing Linux kernel mo
> 
> Versions of packages linux-image-2.6.24-1-686 recommends:
> ii  libc6-i686             2.3.6.ds1-13etch4 GNU C Library: Shared libraries [i
> 
> -- debconf information:
>  shared/kernel-image/really-run-bootloader: true
>  linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
>  linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
>  linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
>  linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
>  linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
>  linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
>  linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
>  linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
>  linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
>  linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
>  linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
>  linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
>  linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
>  linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
>  linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
>  linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
>  linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
>  linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
>  linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:
>  linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists