netdev - Re: NET_SCHED cbq dropping too many packets on a bonding interface

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <482BC84E.3000401@cosmosbay.com>
Date:	Thu, 15 May 2008 07:21:18 +0200
From:	Eric Dumazet <dada1@...mosbay.com>
To:	Kingsley Foreman <kingsley@...ernode.com.au>
Cc:	Andrew Morton <akpm@...ux-foundation.org>,
	linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: NET_SCHED cbq dropping too many packets on a bonding interface

Andrew Morton a écrit :
> (cc netdev)
>
> On Thu, 15 May 2008 12:25:19 +0930 "Kingsley Foreman" <kingsley@...ernode.com.au> wrote:
>
>   
>> Ive been using qdisc for quite a while without any problems,
>> I just rebuilt a gentoo box with 2.6.25 kernel that does a lot of traffic
>> ~1000mbits+ over a bonded interface
>>
>> Im however seeing a big problem with cbq class dropping packets for no
>> reason i can see, and it is causing a lot of speed issues.
>>
>> the basic config is this
>> _____________________________________________________________________
>> /sbin/tc qdisc del dev bond0 root
>> /sbin/tc qdisc add dev bond0 root handle 1 cbq bandwidth 2000Mbit avpkt 1000
>> cell 8
>> /sbin/tc class change dev bond0 root cbq weight 200Mbit allot 1514
>>
>> /sbin/tc class add dev bond0 parent 1: classid 1:1280 cbq bandwidth 2000Mbit
>> rate 1200Mbit weight 120Mbit prio 1 allot 1514 cell 8 maxburst 120 minburst
>> 1 minidle 0 avpkt 1000 bounded
>> /sbin/tc filter add dev bond0 parent 1:0 protocol ip prio 300 route to 5
>> classid 1:1280
>>
>> /sbin/tc class add dev bond0 parent 1: classid 1:1281 cbq bandwidth 2000Mbit
>> rate 400Mbit weight 40Mbit prio 6 allot 1514 cell 8 maxburst 120 minburst 1
>> minidle 0 avpkt 1000 bounded
>> /sbin/tc filter add dev bond0 parent 1:0 protocol ip prio 300 route to 6
>> classid 1:1281
>> ____________________________________________________________________
>>
>> So there is a lot of bandwidth handed out but it is still dropping a lot of
>> packets  for very small ammounts of traffic eg 300mbits.
>>
>> However the biggest problem im seeing is if i just do this
>>
>> __________________________________________________________________
>> /sbin/tc qdisc del dev bond0 root
>> /sbin/tc qdisc add dev bond0 root handle 1 cbq bandwidth 2000Mbit avpkt 1000
>> cell 8
>> /sbin/tc class change dev bond0 root cbq weight 200Mbit allot 1514
>> ___________________________________________________________________
>>
>> after 30sec I get results like
>> ___________________________________________________________________
>>
>> ### bond0: queueing disciplines
>>
>> qdisc cbq 1: root rate 2000Mbit (bounded,isolated) prio no-transmit
>>  Sent 574230043 bytes 407156 pkt (dropped 2524, overlimits 0 requeues 0)
>>  rate 0bit 0pps backlog 0b 0p requeues 0
>>   borrowed 0 overactions 0 avgidle 3 undertime 0
>>
>> ### bond0: traffic classes
>>
>> class cbq 1: root rate 2000Mbit (bounded,isolated) prio no-transmit
>>  Sent 574330783 bytes 407225 pkt (dropped 2525, overlimits 0 requeues 0)
>>  rate 0bit 0pps backlog 0b 0p requeues 0
>>   borrowed 0 overactions 0 avgidle 3 undertime 0
>> __________________________________________________________________
>>
>> I can't for the life if me work out why it is dropping so many packets for 
>> while doing so little traffic when i enable  cbq the transfer rate drops by 
>> approx 30%, any help would be great, and any improvements to my command 
>> lines would be good also.
>>
>>
>> Kingsley Foreman
>>     
>
>
>
>   
Could you provide your linux-2.6.25 .config file please ?

What kind of hardware is your box ? (CPU, network interfaces)

CBQ and other packet schedulers depend on a fast ktime_get() interface, 
so maybe
slowdown you notice has its root on core kernel facilities
(CONFIG_HZ, SCHED_HRTICK, HIGH_RES_TIMERS, ...)

If you remove CBQ, do you get same slowdown if you have a tcpdump 
running on your machine ?





--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html