| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080516162118.8c8a9e5e@mailhost.serverengines.com>
Date: Fri, 16 May 2008 09:21:18 -0700
From: "Subbu Seetharaman" <subbus@...verengines.com>
To: "Stephen Hemminger" <shemminger@...tta.com>
Cc: netdev@...r.kernel.org
Subject: Re: [PATCH 12/15] BE NIC driver - f/w header files
Stephen,
ioctl is a misleading name here.
These are not interfaces between the driver and
the OS or driver and applications like what ioctls
normally do. Like standard NIC drivers,
ethtool is the only mechanism implemented by this
driver to configure the NIC. These defines pertain
to low level messages that are passed between beclib and
the NIC f/w to initialize and configure the NIC.
Several of these low level messages are not necessary
to use this card as a NIC and we could
probably remove them. Does it make things better ?
Thanks.
Subbu
----- Original Message -----
From: Stephen Hemminger [mailto:shemminger@...tta.com]
To: Subbu Seetharaman [mailto:subbus@...verengines.com]
Cc: netdev@...r.kernel.org
Sent: Thu, 15 May 2008 13:25:19 -0700
Subject: Re: [PATCH 12/15] BE NIC driver - f/w header files
On Thu, 15 May 2008 02:46:14 -0700
"Subbu Seetharaman" <subbus@...verengines.com> wrote:
> Signed-off-by: Subbu Seetharaman <subbus@...verengines.com>
> ---
> drivers/message/beclib/fw/amap/ioctl_defs.h | 101 +++
> drivers/message/beclib/fw/amap/ioctl_eth.h | 72 +++
> drivers/message/beclib/fw/amap/ioctl_hdr.h | 80 +++
> drivers/message/beclib/fw/amap/ioctl_mcc.h | 109 ++++
> drivers/message/beclib/fw/amap/ioctl_opcodes.h | 791 ++++++++++++++++++++++++
> drivers/message/beclib/fw/amap/ioctl_top.h | 44 ++
> drivers/message/beclib/fw/amap/ioctl_types.h | 450 ++++++++++++++
> 7 files changed, 1647 insertions(+), 0 deletions(-)
> create mode 100644 drivers/message/beclib/fw/amap/ioctl_defs.h
> create mode 100644 drivers/message/beclib/fw/amap/ioctl_eth.h
> create mode 100644 drivers/message/beclib/fw/amap/ioctl_hdr.h
> create mode 100644 drivers/message/beclib/fw/amap/ioctl_mcc.h
> create mode 100644 drivers/message/beclib/fw/amap/ioctl_opcodes.h
> create mode 100644 drivers/message/beclib/fw/amap/ioctl_top.h
> create mode 100644 drivers/message/beclib/fw/amap/ioctl_types.h
>
> diff --git a/drivers/message/beclib/fw/amap/ioctl_defs.h b/drivers/message/beclib/fw/amap/ioctl_defs.h
> new file mode 100644
> index 0000000..e6208ef
> --- /dev/null
> +++ b/drivers/message/beclib/fw/amap/ioctl_defs.h
> @@ -0,0 +1,101 @@
> +/*
> + * Copyright (C) 2005 - 2008 ServerEngines
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or at your option any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, 5th Floor
> + * Boston, MA 02110-1301 USA
> + *
> + *
> + * The full GNU General Public License is included in this distribution
> + * in the file called GPL.
> + *
> + * Contact Information:
> + * linux-drivers@...verengines.com
> + *
> + * ServerEngines
> + * 209 N. Fair Oaks Ave
> + * Sunnyvale, CA 94085
> + */
> +/*
> + * Autogenerated by srcgen version: 0127
> + */
> +#ifndef __ioctl_defs_amap_h__
> +#define __ioctl_defs_amap_h__
> +
> +/* --- IOCTLDEF_DEFINED_ENUMS --- */
> +#define MGMT_MAX_CONNECTIONS_PER_SESSION (1)
> +#define MGMT_MAX_INITIATOR_PORTALS (1)
> +#define MGMT_MAX_NIC_PORTS (2)
> +#define MGMT_MAX_ISCSI_PORTS (2)
> +#define MGMT_MAX_PORTALS_PER_PG (4)
> +#define MGMT_IPV4_ADDRESS_LEN (4)
> +#define MGMT_IPV4_SUBNET_MASK_LEN (4)
> +#define MGMT_MAX_DNS_SERVER (5)
> +#define MGMT_MAX_MULTICAST_TIMEOUT_ENTRIES (5)
> +#define MGMT_ISID_LENGTH (6)
> +#define MGMT_MAX_SCSI_CHANNELS (8)
> +#define MGMT_MAX_BOOTABLE_LUN (8)
> +#define MGMT_LUN_SIZE (8)
> +#define MGMT_IOCTL_MIN_SRB_TIMEOUT_VALUE (10)
> +#define MGMT_DIGEST_KEY_LEN (12)
> +#define MGMT_CHAP_SECRET_MIN_LEN (12)
> +#define MGMT_MAX_ROUTE_ENTRIES (16)
> +#define MGMT_CHAP_SECRET_LEN (16)
> +#define MGMT_IPV6_ADDRESS_LEN (16)
> +#define MGMT_IPV6_SUBNET_MASK_LEN (16)
> +#define MGMT_MAX_CDB_LEN (16)
> +#define MGMT_SENSE_BUFFER_LEN (18)
> +#define MGMT_MAX_SG_COUNT (19)
> +#define MGMT_SECURITY_KEY_LEN (30)
> +#define MGMT_ISCSI_ALIAS_LEN (32)
> +#define MGMT_MAX_MANUFACTURER_STRING (32)
> +#define MGMT_MAX_MODEL_NUMBER_STRING (32)
> +#define MGMT_MAX_CTLR_SERIALNO_STRING (32)
> +#define MGMT_MAX_FLASHROM_VERSION_STRING (32)
> +#define MGMT_MAX_FW_VERSION_STRING (32)
> +#define MGMT_MAX_IP_VERSION_STRING (32)
> +#define MGMT_MAX_ISCSI_VERSION_STRING (32)
> +#define MGMT_MAX_BIOS_VERSION_STRING (32)
> +#define MGMT_MAX_REDBOOT_VERSION_STRING (32)
> +#define MGMT_MAX_DRV_VERSION_STRING (32)
> +#define MGMT_MAX_INITIATOR_ALLOWED (32)
> +#define MGMT_MAX_TGT_IP_SUPPORTED (32)
> +#define MGMT_MAX_TARGETS_ALLOWED_USING_DISCOVERY (64)
> +#define MGMT_MAX_ARP_ENTRIES (64)
> +#define MGMT_DNS_NAME_LEN (64)
> +#define MGMT_MAX_CTLR_DESCRIPTION_STRING (64)
> +#define MGMT_MAX_PORTAL_GROUPS (128)
> +#define MGMT_ISCSI_NAME_LEN (224)
> +#define MGMT_ISNS_PORTAL_SYM_NAME_LEN (256)
> +#define MGMT_CHAP_NAME_LEN (256)
> +#define MGMT_SEND_TARGET_TEXTKEY (256)
> +#define MGMT_MAX_SCOPE_LIST_LENGTH (256)
> +#define MGMT_MAX_QUERY_LIST_LENGTH (256)
> +#define MGMT_PRESHARED_KEYSIZE (256)
> +#define MGMT_IPSEC_ID_SIZE (256)
> +#define MGMT_MAX_TARGETS_ALLOWED (512)
> +#define MGMT_MAX_LUNS (512)
> +#define MGMT_MAX_HOST_TABLE (512)
> +#define MGMT_MAX_ISCSI_SESSIONS_ALLOWED (512)
> +#define MGMT_MAX_CONNECTIONS (512)
> +#define MGMT_MAX_PORTALS (1024)
> +#define MAX_SEEPROM_SIZE (1024)
> +#define MGMT_MAX_IOCTL_PAYLOAD_SIZE (73728)
> +
> +#ifdef SG_PRAGMA_PACK
> +#pragma pack(pop)
> +#endif
> +
> +#endif /* __ioctl_defs_amap_h__ */
> diff --git a/drivers/message/beclib/fw/amap/ioctl_eth.h b/drivers/message/beclib/fw/amap/ioctl_eth.h
> new file mode 100644
> index 0000000..bdc717e
> --- /dev/null
> +++ b/drivers/message/beclib/fw/amap/ioctl_eth.h
> @@ -0,0 +1,72 @@
> +/*
> + * Copyright (C) 2005 - 2008 ServerEngines
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or at your option any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, 5th Floor
> + * Boston, MA 02110-1301 USA
> + *
> + *
> + * The full GNU General Public License is included in this distribution
> + * in the file called GPL.
> + *
> + * Contact Information:
> + * linux-drivers@...verengines.com
> + *
> + * ServerEngines
> + * 209 N. Fair Oaks Ave
> + * Sunnyvale, CA 94085
> + */
> +/*
> + * Autogenerated by srcgen version: 0127
> + */
> +#ifndef __ioctl_eth_amap_h__
> +#define __ioctl_eth_amap_h__
> +#include "ioctl_hdr.h"
> +#include "ioctl_types.h"
> +
> +/* --- RXF_STATS_INTERESTING_OFFSETS --- */
> +#define P0_RECVD_TOTAL_BYTES_LSD_DWORD_OFFSET (0)
> +#define P0_RECVD_TOTAL_BYTES_MSD_DWORD_OFFSET (1)
> +#define P0_XMIT_BYTES_LSD_DWORD_OFFSET (40)
> +#define P0_XMIT_BYTES_MSD_DWORD_OFFSET (41)
> +#define P1_RECVD_TOTAL_BYTES_LSD_DWORD_OFFSET (59)
> +#define P1_RECVD_TOTAL_BYTES_MSD_DWORD_OFFSET (60)
> +#define P1_XMIT_BYTES_LSD_DWORD_OFFSET (99)
> +#define P1_XMIT_BYTES_MSD_DWORD_OFFSET (100)
> +/*
> + * --- ENABLE_RSS_ENUM ---
> + * Enable RSS enum.
> + */
> +#define RSS_ENABLE_NONE (0) /* No RSS */
> +#define RSS_ENABLE_IPV4 (1) /* IPV4 HASH only (i.e. only IP */
> + /* source/dest two-tuple) */
> +#define RSS_ENABLE_TCP_IPV4 (2) /* TCP IPV4 HASH only
> + (i.e. only TCP/IP four-tuple) */
> +#define RSS_ENABLE_IPV4_OR_TCP_IPV4 (3) /* IPV4 or TCP IPV4 HASH (i.e. if */
> + /*
> + * TCP/IP, then use four-tuple, else if
> + * IP use two-tuple)
> + */
> +/*
> + * --- RSS_FLUSH_CQ_ENUM ---
> + * Flush CQ enum.
> + */
> +#define RSS_FLUSH_CQ_DEFAULT (1) /* Flush default host networking CQ */
> +#define RSS_FLUSH_CQ_PROC0 (2) /* Flush RSS CQ for processor 0 */
> +#define RSS_FLUSH_CQ_PROC1 (4) /* Flush RSS CQ for processor 1 */
> +#define RSS_FLUSH_CQ_PROC2 (8) /* Flush RSS CQ for processor 2 */
> +#define RSS_FLUSH_CQ_PROC3 (16) /* Flush RSS CQ for processor 3 */
> +
> +#endif /* __ioctl_eth_amap_h__ */
> diff --git a/drivers/message/beclib/fw/amap/ioctl_hdr.h b/drivers/message/beclib/fw/amap/ioctl_hdr.h
> new file mode 100644
> index 0000000..7e96fd1
> --- /dev/null
> +++ b/drivers/message/beclib/fw/amap/ioctl_hdr.h
> @@ -0,0 +1,80 @@
> +/*
> + * Copyright (C) 2005 - 2008 ServerEngines
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or at your option any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, 5th Floor
> + * Boston, MA 02110-1301 USA
> + *
> + *
> + * The full GNU General Public License is included in this distribution
> + * in the file called GPL.
> + *
> + * Contact Information:
> + * linux-drivers@...verengines.com
> + *
> + * ServerEngines
> + * 209 N. Fair Oaks Ave
> + * Sunnyvale, CA 94085
> + */
> +/*
> + * Autogenerated by srcgen version: 0127
> + */
> +#ifndef __ioctl_hdr_amap_h__
> +#define __ioctl_hdr_amap_h__
> +#include "nativedefs.h"
> +#include "ioctl_defs.h"
> +#include "ioctl_opcodes.h"
> +
> +struct BE_IOCTL_REQUEST_HEADER_AMAP {
> + struct BE_UEXACT8_AMAP opcode;
> + struct BE_UEXACT8_AMAP subsystem;
> + struct BE_UEXACT8_AMAP port_number;
> + struct BE_UEXACT8_AMAP domain;
> + struct BE_UEXACT32_AMAP timeout;
> + struct BE_UEXACT32_AMAP request_length;
> + BE_BIT rsvd0[32]; /* DWORD 3 */
> +} SG_PACK;
> +struct IOCTL_REQUEST_HEADER_AMAP {
> + u32 dw[4];
> +};
> +
> +struct BE_IOCTL_RESPONSE_HEADER_AMAP {
> + struct BE_UEXACT8_AMAP opcode;
> + struct BE_UEXACT8_AMAP subsystem;
> + BE_BIT rsvd0[8]; /* DWORD 0 */
> + struct BE_UEXACT8_AMAP domain;
> + struct BE_UEXACT8_AMAP status;
> + struct BE_UEXACT8_AMAP additional_status;
> + BE_BIT rsvd1[16]; /* DWORD 1 */
> + struct BE_UEXACT32_AMAP response_length;
> + struct BE_UEXACT32_AMAP actual_response_length;
> +} SG_PACK;
> +struct IOCTL_RESPONSE_HEADER_AMAP {
> + u32 dw[4];
> +};
> +
> +/*
> + * The firmware/driver overwrites the input IOCTL_REQUEST_HEADER with the
> + * output IOCTL_RESPONSE_HEADER.
> + */
> +union BE_IOCTL_HEADER_AMAP {
> + struct BE_IOCTL_REQUEST_HEADER_AMAP request;
> + struct BE_IOCTL_RESPONSE_HEADER_AMAP response;
> +} SG_PACK;
> +struct IOCTL_HEADER_AMAP {
> + u32 dw[4];
> +};
> +
> +#endif /* __ioctl_hdr_amap_h__ */
> diff --git a/drivers/message/beclib/fw/amap/ioctl_mcc.h b/drivers/message/beclib/fw/amap/ioctl_mcc.h
> new file mode 100644
> index 0000000..ccb463b
> --- /dev/null
> +++ b/drivers/message/beclib/fw/amap/ioctl_mcc.h
> @@ -0,0 +1,109 @@
> +/*
> + * Copyright (C) 2005 - 2008 ServerEngines
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or at your option any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, 5th Floor
> + * Boston, MA 02110-1301 USA
> + *
> + *
> + * The full GNU General Public License is included in this distribution
> + * in the file called GPL.
> + *
> + * Contact Information:
> + * linux-drivers@...verengines.com
> + *
> + * ServerEngines
> + * 209 N. Fair Oaks Ave
> + * Sunnyvale, CA 94085
> + */
> +/*
> + * Autogenerated by srcgen version: 0127
> + */
> +#ifndef __ioctl_mcc_amap_h__
> +#define __ioctl_mcc_amap_h__
> +#include "ioctl_defs.h"
> +#include "ioctl_opcodes.h"
> +
> +/*
> + * Where applicable, a WRB, may contain a list of Scatter-gather elements.
> + * Each element supports a 64 bit address and a 32bit length field.
> + */
> +struct BE_MCC_SGE_AMAP {
> + BE_BIT pa_lo[32]; /* DWORD 0 */
> + BE_BIT pa_hi[32]; /* DWORD 1 */
> + BE_BIT length[32]; /* DWORD 2 */
> +} SG_PACK;
> +struct MCC_SGE_AMAP {
> + u32 dw[3];
> +};
> +
> +/*
> + * The design of an [link]MCC_SGE[/link] allows up to 19 elements to be
> + * embedded in a WRB, supporting 64KB data transfers (assuming a 4KB page size).
> + */
> +union BE_MCC_WRB_PAYLOAD_AMAP {
> + struct BE_MCC_SGE_AMAP sgl[19];
> + BE_BIT embedded[59][32]; /* DWORD 0 */
> +} SG_PACK;
> +struct MCC_WRB_PAYLOAD_AMAP {
> + u32 dw[59];
> +};
> +
> +/*
> + * This is the structure of the MCC Command WRB for commands
> + * sent to the Management Processing Unit (MPU). See section
> + * for usage in embedded and non-embedded modes.
> + */
> +struct BE_MCC_WRB_AMAP {
> + BE_BIT embedded; /* DWORD 0 */
> + BE_BIT rsvd0[2]; /* DWORD 0 */
> + BE_BIT sge_count[5]; /* DWORD 0 */
> + BE_BIT rsvd1[16]; /* DWORD 0 */
> + BE_BIT special[8]; /* DWORD 0 */
> + BE_BIT payload_length[32]; /* DWORD 1 */
> + BE_BIT tag[2][32]; /* DWORD 2 */
> + BE_BIT rsvd2[32]; /* DWORD 4 */
> + union BE_MCC_WRB_PAYLOAD_AMAP payload;
> +} SG_PACK;
> +struct MCC_WRB_AMAP {
> + u32 dw[64];
> +};
> +
> +/* This is the structure of the MCC Completion queue entry */
> +struct BE_MCC_CQ_ENTRY_AMAP {
> + BE_BIT completion_status[16]; /* DWORD 0 */
> + BE_BIT extended_status[16]; /* DWORD 0 */
> + BE_BIT mcc_tag[2][32]; /* DWORD 1 */
> + BE_BIT rsvd0[27]; /* DWORD 3 */
> + BE_BIT consumed; /* DWORD 3 */
> + BE_BIT completed; /* DWORD 3 */
> + BE_BIT hpi_buffer_completion; /* DWORD 3 */
> + BE_BIT async_event; /* DWORD 3 */
> + BE_BIT valid; /* DWORD 3 */
> +} SG_PACK;
> +struct MCC_CQ_ENTRY_AMAP {
> + u32 dw[4];
> +};
> +
> +/* Mailbox structures used by the MPU during bootstrap */
> +struct BE_MCC_MAILBOX_AMAP {
> + struct BE_MCC_WRB_AMAP wrb;
> + struct BE_MCC_CQ_ENTRY_AMAP cq;
> +} SG_PACK;
> +struct MCC_MAILBOX_AMAP {
> + u32 dw[68];
> +};
> +
> +#endif /* __ioctl_mcc_amap_h__ */
> diff --git a/drivers/message/beclib/fw/amap/ioctl_opcodes.h b/drivers/message/beclib/fw/amap/ioctl_opcodes.h
> new file mode 100644
> index 0000000..3627f7f
> --- /dev/null
> +++ b/drivers/message/beclib/fw/amap/ioctl_opcodes.h
> @@ -0,0 +1,791 @@
> +/*
> + * Copyright (C) 2005 - 2008 ServerEngines
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or at your option any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, 5th Floor
> + * Boston, MA 02110-1301 USA
> + *
> + *
> + * The full GNU General Public License is included in this distribution
> + * in the file called GPL.
> + *
> + * Contact Information:
> + * linux-drivers@...verengines.com
> + *
> + * ServerEngines
> + * 209 N. Fair Oaks Ave
> + * Sunnyvale, CA 94085
> + */
> +/*
> + * Autogenerated by srcgen version: 0127
> + */
> +#ifndef __ioctl_opcodes_amap_h__
> +#define __ioctl_opcodes_amap_h__
> +
> +/*
> + * --- IOCTL_SUBSYSTEMS ---
> + * The IOCTLs are grouped into the following subsystems. The subsystem
> + * code along with the opcode uniquely identify a particular IOCTL.
> + */
> +#define IOCTL_SUBSYSTEM_RSVD (0) /* This subsystem is reserved. It is */
> + /* never used. */
> +#define IOCTL_SUBSYSTEM_COMMON (1) /* IOCTLs in this group are common to
> + * all subsystems. See
> + * COMMON_SUBSYSTEM_OPCODES for opcodes
> + * and Common Host Configuration IOCTLs
> + * for the IOCTL descriptions.
> + */
> +#define IOCTL_SUBSYSTEM_COMMON_ISCSI (2) /* IOCTLs in this group are */
> + /*
> + * common to Initiator and Target. See
> + * COMMON_ISCSI_SUBSYSTEM_OPCODES and
> + * Common iSCSI Initiator and Target
> + * IOCTLs for the IOCTL descriptions.
> + */
> +#define IOCTL_SUBSYSTEM_ETH (3) /* This subsystem is used to
> + execute Ethernet commands. */
> +
> +#define IOCTL_SUBSYSTEM_TPM (4) /* This subsystem is used
> + to execute TPM commands. */
> +#define IOCTL_SUBSYSTEM_PXE_UNDI (5) /* This subsystem is used
> + * to execute PXE
> + * and UNDI specific commands.
> + */
> +
> +#define IOCTL_SUBSYSTEM_ISCSI_INI (6) /* This subsystem is used to
> + execute ISCSI Initiator
> + specific commands.
> + */
> +#define IOCTL_SUBSYSTEM_ISCSI_TGT (7) /* This subsystem is used
> + to execute iSCSI Target
> + specific commands.between
> + PTL and ARM firmware.
> + */
> +#define IOCTL_SUBSYSTEM_MILI_PTL (8) /* This subsystem is used to
> + execute iSCSI Target specific
> + commands.between MILI
> + and PTL. */
> +#define IOCTL_SUBSYSTEM_MILI_TMD (9) /* This subsystem is used to
> + execute iSCSI Target specific
> + commands between MILI
> + and TMD. */
> +#define IOCTL_SUBSYSTEM_PROXY (11) /* This subsystem is used
> + to execute proxied commands
> + within the host at the
> + explicit request of a
> + non priviledged domain.
> + This 'subsystem' is entirely
> + virtual from the controller
> + and firmware perspective as
> + it is implemented in host
> + drivers.
> + */
> +
> +/*
> + * --- COMMON_SUBSYSTEM_OPCODES ---
> + * These opcodes are common to both networking and storage PCI
> + * functions. They are used to reserve resources and configure
> + * BladeEngine. These opcodes all use the IOCTL_SUBSYSTEM_COMMON
> + * subsystem code.
> + */
> +#define OPCODE_COMMON_NTWK_MAC_QUERY (1)
> +#define SUBSYSTEM_COMMON_NTWK_MAC_QUERY (1)
> +#define SUBSYSTEM_COMMON_NTWK_MAC_SET (1)
> +#define SUBSYSTEM_COMMON_NTWK_MULTICAST_SET (1)
> +#define SUBSYSTEM_COMMON_NTWK_VLAN_CONFIG (1)
> +#define SUBSYSTEM_COMMON_NTWK_LINK_STATUS_QUERY (1)
> +#define SUBSYSTEM_COMMON_READ_FLASHROM (1)
> +#define SUBSYSTEM_COMMON_WRITE_FLASHROM (1)
> +#define SUBSYSTEM_COMMON_QUERY_MAX_IOCTL_BUFFER_SIZE (1)
> +#define SUBSYSTEM_COMMON_ADD_PAGE_TABLES (1)
> +#define SUBSYSTEM_COMMON_REMOVE_PAGE_TABLES (1)
> +#define SUBSYSTEM_COMMON_RING_DESTROY (1)
> +#define SUBSYSTEM_COMMON_CQ_CREATE (1)
> +#define SUBSYSTEM_COMMON_EQ_CREATE (1)
> +#define SUBSYSTEM_COMMON_ETH_RX_CREATE (1)
> +#define SUBSYSTEM_COMMON_ETH_TX_CREATE (1)
> +#define SUBSYSTEM_COMMON_ISCSI_DEFQ_CREATE (1)
> +#define SUBSYSTEM_COMMON_ISCSI_WRBQ_CREATE (1)
> +#define SUBSYSTEM_COMMON_MCC_CREATE (1)
> +#define SUBSYSTEM_COMMON_JELL_CONFIG (1)
> +#define SUBSYSTEM_COMMON_FORCE_FAILOVER (1)
> +#define SUBSYSTEM_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (1)
> +#define SUBSYSTEM_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (1)
> +#define SUBSYSTEM_COMMON_POST_ZERO_BUFFER (1)
> +#define SUBSYSTEM_COMMON_GET_QOS (1)
> +#define SUBSYSTEM_COMMON_SET_QOS (1)
> +#define SUBSYSTEM_COMMON_TCP_GET_STATISTICS (1)
> +#define SUBSYSTEM_COMMON_SEEPROM_READ (1)
> +#define SUBSYSTEM_COMMON_TCP_STATE_QUERY (1)
> +#define SUBSYSTEM_COMMON_GET_CNTL_ATTRIBUTES (1)
> +#define SUBSYSTEM_COMMON_NOP (1)
> +#define SUBSYSTEM_COMMON_NTWK_RX_FILTER (1)
> +#define SUBSYSTEM_COMMON_GET_FW_VERSION (1)
> +#define SUBSYSTEM_COMMON_SET_FLOW_CONTROL (1)
> +#define SUBSYSTEM_COMMON_GET_FLOW_CONTROL (1)
> +#define SUBSYSTEM_COMMON_SET_TCP_PARAMETERS (1)
> +#define SUBSYSTEM_COMMON_SET_FRAME_SIZE (1)
> +#define SUBSYSTEM_COMMON_GET_FAT (1)
> +#define SUBSYSTEM_COMMON_MODIFY_EQ_DELAY (1)
> +#define SUBSYSTEM_COMMON_FIRMWARE_CONFIG (1)
> +#define SUBSYSTEM_COMMON_ENABLE_DISABLE_DOMAINS (1)
> +#define SUBSYSTEM_COMMON_GET_DOMAIN_CONFIG (1)
> +#define SUBSYSTEM_COMMON_SET_VLD_CONFIG (1)
> +#define SUBSYSTEM_COMMON_GET_VLD_CONFIG (1)
> +#define SUBSYSTEM_COMMON_GET_PORT_EQUALIZATION (1)
> +#define SUBSYSTEM_COMMON_SET_PORT_EQUALIZATION (1)
> +#define SUBSYSTEM_COMMON_RED_CONFIG (1)
> +#define OPCODE_COMMON_NTWK_MAC_SET (2)
> +#define OPCODE_COMMON_NTWK_MULTICAST_SET (3)
> +#define OPCODE_COMMON_NTWK_VLAN_CONFIG (4)
> +#define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY (5)
> +#define OPCODE_COMMON_READ_FLASHROM (6)
> +#define OPCODE_COMMON_WRITE_FLASHROM (7)
> +#define OPCODE_COMMON_QUERY_MAX_IOCTL_BUFFER_SIZE (8)
> +#define OPCODE_COMMON_ADD_PAGE_TABLES (9)
> +#define OPCODE_COMMON_REMOVE_PAGE_TABLES (10)
> +#define OPCODE_COMMON_RING_DESTROY (11)
> +#define OPCODE_COMMON_CQ_CREATE (12)
> +#define OPCODE_COMMON_EQ_CREATE (13)
> +#define OPCODE_COMMON_ETH_RX_CREATE (14)
> +#define OPCODE_COMMON_ETH_TX_CREATE (15)
> +#define OPCODE_COMMON_NET_RESERVED0 (16) /* Reserved */
> +#define OPCODE_COMMON_NET_RESERVED1 (17) /* Reserved */
> +#define OPCODE_COMMON_NET_RESERVED2 (18) /* Reserved */
> +#define OPCODE_COMMON_ISCSI_DEFQ_CREATE (19)
> +#define OPCODE_COMMON_ISCSI_WRBQ_CREATE (20)
> +#define OPCODE_COMMON_MCC_CREATE (21)
> +#define OPCODE_COMMON_JELL_CONFIG (22)
> +#define OPCODE_COMMON_FORCE_FAILOVER (23)
> +#define OPCODE_COMMON_ADD_TEMPLATE_HEADER_BUFFERS (24)
> +#define OPCODE_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS (25)
> +#define OPCODE_COMMON_POST_ZERO_BUFFER (26)
> +#define OPCODE_COMMON_GET_QOS (27)
> +#define OPCODE_COMMON_SET_QOS (28)
> +#define OPCODE_COMMON_TCP_GET_STATISTICS (29)
> +#define OPCODE_COMMON_SEEPROM_READ (30)
> +#define OPCODE_COMMON_TCP_STATE_QUERY (31)
> +#define OPCODE_COMMON_GET_CNTL_ATTRIBUTES (32)
> +#define OPCODE_COMMON_NOP (33)
> +#define OPCODE_COMMON_NTWK_RX_FILTER (34)
> +#define OPCODE_COMMON_GET_FW_VERSION (35)
> +#define OPCODE_COMMON_SET_FLOW_CONTROL (36)
> +#define OPCODE_COMMON_GET_FLOW_CONTROL (37)
> +#define OPCODE_COMMON_SET_TCP_PARAMETERS (38)
> +#define OPCODE_COMMON_SET_FRAME_SIZE (39)
> +#define OPCODE_COMMON_GET_FAT (40)
> +#define OPCODE_COMMON_MODIFY_EQ_DELAY (41)
> +#define OPCODE_COMMON_FIRMWARE_CONFIG (42)
> +#define OPCODE_COMMON_ENABLE_DISABLE_DOMAINS (43)
> +#define OPCODE_COMMON_GET_DOMAIN_CONFIG (44)
> +#define OPCODE_COMMON_SET_VLD_CONFIG (45)
> +#define OPCODE_COMMON_GET_VLD_CONFIG (46)
> +#define OPCODE_COMMON_GET_PORT_EQUALIZATION (47)
> +#define OPCODE_COMMON_SET_PORT_EQUALIZATION (48)
> +#define OPCODE_COMMON_RED_CONFIG (49)
> +
> +/*
> + * --- COMMON_ISCSI_SUBSYSTEM_OPCODES ---
> + * IOCTLs used to configure discovery and networking parameters in
> + * iSCSI Initiator and Target modes. These opcodes all use the
> + * IOCTL_SUBSYSTEM_COMMON_ISCSI subsystem code.
> + */
> +#define OPCODE_COMMON_ISCSI_ERROR_RECOVERY_INVALIDATE_COMMANDS (1)
> +#define SUBSYSTEM_COMMON_ISCSI_ERROR_RECOVERY_INVALIDATE_COMMANDS (2)
> +#define OPCODE_COMMON_ISCSI_CFG_POST_SGL_PAGES (2)
> +#define SUBSYSTEM_COMMON_ISCSI_CFG_POST_SGL_PAGES (2)
> +#define SUBSYSTEM_COMMON_ISCSI_CFG_REMOVE_SGL_PAGES (2)
> +#define SUBSYSTEM_COMMON_ISCSI_CFG_POST_OOO_BUFFERS (2)
> +#define SUBSYSTEM_COMMON_ISCSI_CFG_REMOVE_OOO_BUFFERS (2)
> +#define SUBSYSTEM_COMMON_ISCSI_NTWK_PING (2)
> +#define SUBSYSTEM_COMMON_ISCSI_NTWK_GET_NIC_CONFIG (2)
> +#define SUBSYSTEM_COMMON_ISCSI_NTWK_GET_ARP_TABLE (2)
> +#define SUBSYSTEM_COMMON_ISCSI_NTWK_SET_ARP_TABLE (2)
> +#define SUBSYSTEM_COMMON_ISCSI_NTWK_GET_ROUTE_TABLE (2)
> +#define SUBSYSTEM_COMMON_ISCSI_NTWK_SET_ROUTE_TABLE (2)
> +#define SUBSYSTEM_COMMON_ISCSI_DISCOVERY_GET_PARAMETERS (2)
> +#define SUBSYSTEM_COMMON_ISCSI_DISCOVERY_SET_PARAMETERS (2)
> +#define SUBSYSTEM_COMMON_ISCSI_STATS_GET_NODE_ATTRIBUTES (2)
> +#define SUBSYSTEM_COMMON_ISCSI_STATS_GET_NIC_STATISTICS (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_DOWNLOAD_XML (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_DELETE_XML (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_GET_RX_STATS (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_GET_TX_STATS (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_ADD_CERTIFICATE (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_DEL_CERTIFICATE (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_ADD_PRIVATE_KEY (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_DEL_PRIVATE_KEY (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_ADD_PASSPHRASE (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_DEL_PASSPHRASE (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_ENABLE_DISABLE_FLASH_ENCRYPTION (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_GET_GROUP_NAMES (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_GET_SINGLE_GROUP_NAME (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_ADD_GROUP (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_DELETE_GROUP (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_GET_QMSTATS (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_GET_MMSTATS (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_GET_STATE (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_CLEAR_PSK_CACHE (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_GET_PSK (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_SET_GUID (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_SET_PSK (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_SET_TUNNEL_MODE_OUTER_ADDRESS (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_GET_SECURITY_CAPABILITIES (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_SET_GROUP_PSK (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_ADD_ROOT_CERTIFICATE (2)
> +#define SUBSYSTEM_COMMON_ISCSI_IPSEC_ENABLE_DISABLE (2)
> +#define SUBSYSTEM_COMMON_ISCSI_CLEANUP (2)
> +#define SUBSYSTEM_COMMON_ISCSI_ADD_8BYTE_LUN (2)
> +#define SUBSYSTEM_COMMON_ISCSI_SET_FRAGNUM_BITS_FOR_SGL_CRA (2)
> +#define SUBSYSTEM_COMMON_ISCSI_CFG_CLEAR_EVENT_LOG (2)
> +#define SUBSYSTEM_COMMON_ISCSI_CFG_READ_EVENT_LOG (2)
> +#define OPCODE_COMMON_ISCSI_CFG_REMOVE_SGL_PAGES (3)
> +#define OPCODE_COMMON_ISCSI_CFG_POST_OOO_BUFFERS (4)
> +#define OPCODE_COMMON_ISCSI_CFG_REMOVE_OOO_BUFFERS (5)
> +#define OPCODE_COMMON_ISCSI_NTWK_PING (6)
> +#define OPCODE_COMMON_ISCSI_NTWK_GET_NIC_CONFIG (7)
> +#define OPCODE_COMMON_ISCSI_NTWK_GET_ARP_TABLE (8)
> +#define OPCODE_COMMON_ISCSI_NTWK_SET_ARP_TABLE (9)
> +#define OPCODE_COMMON_ISCSI_NTWK_GET_ROUTE_TABLE (10)
> +#define OPCODE_COMMON_ISCSI_NTWK_SET_ROUTE_TABLE (11)
> +#define OPCODE_COMMON_ISCSI_DISCOVERY_GET_PARAMETERS (12)
> +#define OPCODE_COMMON_ISCSI_DISCOVERY_SET_PARAMETERS (13)
> +#define OPCODE_COMMON_ISCSI_STATS_GET_NODE_ATTRIBUTES (14)
> +#define OPCODE_COMMON_ISCSI_STATS_GET_NIC_STATISTICS (15)
> +#define OPCODE_COMMON_ISCSI_IPSEC_DOWNLOAD_XML (16)
> +#define OPCODE_COMMON_ISCSI_IPSEC_DELETE_XML (17)
> +#define OPCODE_COMMON_ISCSI_IPSEC_GET_RX_STATS (18)
> +#define OPCODE_COMMON_ISCSI_IPSEC_GET_TX_STATS (19)
> +#define OPCODE_COMMON_ISCSI_IPSEC_ADD_CERTIFICATE (20)
> +#define OPCODE_COMMON_ISCSI_IPSEC_DEL_CERTIFICATE (21)
> +#define OPCODE_COMMON_ISCSI_IPSEC_ADD_PRIVATE_KEY (22)
> +#define OPCODE_COMMON_ISCSI_IPSEC_DEL_PRIVATE_KEY (23)
> +#define OPCODE_COMMON_ISCSI_IPSEC_ADD_PASSPHRASE (24)
> +#define OPCODE_COMMON_ISCSI_IPSEC_DEL_PASSPHRASE (25)
> +#define OPCODE_COMMON_ISCSI_IPSEC_ENABLE_DISABLE_FLASH_ENCRYPTION (26)
> +#define OPCODE_COMMON_ISCSI_IPSEC_GET_GROUP_NAMES (27)
> +#define OPCODE_COMMON_ISCSI_IPSEC_GET_SINGLE_GROUP_NAME (28)
> +#define OPCODE_COMMON_ISCSI_IPSEC_ADD_GROUP (29)
> +#define OPCODE_COMMON_ISCSI_IPSEC_DELETE_GROUP (30)
> +#define OPCODE_COMMON_ISCSI_IPSEC_GET_QMSTATS (31)
> +#define OPCODE_COMMON_ISCSI_IPSEC_GET_MMSTATS (32)
> +#define OPCODE_COMMON_ISCSI_IPSEC_GET_STATE (33)
> +#define OPCODE_COMMON_ISCSI_IPSEC_CLEAR_PSK_CACHE (34)
> +#define OPCODE_COMMON_ISCSI_IPSEC_GET_PSK (35)
> +#define OPCODE_COMMON_ISCSI_IPSEC_SET_GUID (36)
> +#define OPCODE_COMMON_ISCSI_IPSEC_SET_PSK (37)
> +#define OPCODE_COMMON_ISCSI_IPSEC_SET_TUNNEL_MODE_OUTER_ADDRESS (38)
> +#define OPCODE_COMMON_ISCSI_IPSEC_GET_SECURITY_CAPABILITIES (39)
> +#define OPCODE_COMMON_ISCSI_IPSEC_SET_GROUP_PSK (40)
> +#define OPCODE_COMMON_ISCSI_IPSEC_ADD_ROOT_CERTIFICATE (41)
> +#define OPCODE_COMMON_ISCSI_IPSEC_ENABLE_DISABLE (42)
> +#define OPCODE_COMMON_ISCSI_CLEANUP (43)
> +#define OPCODE_COMMON_ISCSI_ADD_8BYTE_LUN (44)
> +#define OPCODE_COMMON_ISCSI_SET_FRAGNUM_BITS_FOR_SGL_CRA (45)
> +#define OPCODE_COMMON_ISCSI_CFG_CLEAR_EVENT_LOG (46)
> +#define OPCODE_COMMON_ISCSI_CFG_READ_EVENT_LOG (47)
> +
> +/*
> + * --- ISCSI_INI_SUBSYSTEM_OPCODES ---
> + * Opcodes applicable to the IOCTL_SUBSYSTEM_ISCSI_INI subsystem.
> + */
> +#define OPCODE_ISCSI_INI_NTWK_GET_TCPIP_CONFIG (1)
> +#define OPCODE_ISCSI_INI_NTWK_SET_TCPIP_CONFIG (2)
> +#define OPCODE_ISCSI_INI_NTWK_GET_DHCP_STATUS (3)
> +#define OPCODE_ISCSI_INI_CFG_GET_CNTL_ATTRIBUTES (4)
> +#define OPCODE_ISCSI_INI_CFG_GET_HBA_COUNT (5)
> +#define SUBSYSTEM_ISCSI_INI_NTWK_GET_TCPIP_CONFIG (6)
> +#define SUBSYSTEM_ISCSI_INI_NTWK_SET_TCPIP_CONFIG (6)
> +#define SUBSYSTEM_ISCSI_INI_NTWK_GET_DHCP_STATUS (6)
> +#define SUBSYSTEM_ISCSI_INI_CFG_GET_CNTL_ATTRIBUTES (6)
> +#define SUBSYSTEM_ISCSI_INI_CFG_GET_HBA_COUNT (6)
> +#define OPCODE_ISCSI_INI_CFG_GET_HBA_NAME (6)
> +#define SUBSYSTEM_ISCSI_INI_CFG_GET_HBA_NAME (6)
> +#define SUBSYSTEM_ISCSI_INI_CFG_SET_HBA_NAME (6)
> +#define SUBSYSTEM_ISCSI_INI_CFG_SET_HBA_TIME (6)
> +#define SUBSYSTEM_ISCSI_INI_CFG_GET_CHAP_SECRET (6)
> +#define SUBSYSTEM_ISCSI_INI_CFG_SET_CHAP_SECRET (6)
> +#define SUBSYSTEM_ISCSI_INI_CFG_GET_HBA_STATUS (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_GET_ALL_SESSIONS (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_GET_SESSION_LIST (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_GET_A_SESSION (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_GET_ALL_CONNECTIONS (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_GET_CONFIGURATION (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_SET_CONFIGURATION (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_GET_CONFIGURATION_LIST (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_MODIFY_SESSION_LOGINKEYS (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_MODIFY_CONNECTION_LOGINKEYS (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_ADD_CONNECTION_TO_SESSION (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_CLOSE_CONNECTION (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_LOGIN_TARGET (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_LOGOUT_TARGET (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_GET_ALL_PLOGIN_TGTNAME_PORTAL (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_QUERY_A_PERSISTENT_LOGIN (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_QUERY_PERSISTENT_LOGINS (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_ADD_PERSISTENT_LOGIN (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_DELETE_PERSISTENT_LOGIN (6)
> +#define SUBSYSTEM_ISCSI_INI_SESSION_GET_ALL_SESSION_ID (6)
> +#define SUBSYSTEM_ISCSI_INI_DISCOVERY_GET_ALL_DISCOVERED_TARGET_ID (6)
> +#define SUBSYSTEM_ISCSI_INI_DISCOVERY_REPORT_ALL_TARGETS (6)
> +#define SUBSYSTEM_ISCSI_INI_DISCOVERY_REPORT_A_TARGET (6)
> +#define SUBSYSTEM_ISCSI_INI_DISCOVERY_SEND_TARGETS (6)
> +#define SUBSYSTEM_ISCSI_INI_RETRIEVE_PARSED_TARGET_INFO (6)
> +#define SUBSYSTEM_ISCSI_INI_DRIVER_REOPEN_A_SESSION (6)
> +#define SUBSYSTEM_ISCSI_INI_DRIVER_REOPEN_ALL_SESSIONS (6)
> +#define SUBSYSTEM_ISCSI_INI_DRIVER_REOPEN_A_CONN (6)
> +#define SUBSYSTEM_ISCSI_INI_DRIVER_DEL_ALL_NONPERSISTENT_SESSIONS (6)
> +#define SUBSYSTEM_ISCSI_INI_DRIVER_STORE_NONPERSISTENT_SESSIONS (6)
> +#define SUBSYSTEM_ISCSI_INI_DRIVER_LOGIN_ALL_SESSIONS (6)
> +#define SUBSYSTEM_ISCSI_INI_DRIVER_OFFLOAD_SESSION (6)
> +#define SUBSYSTEM_ISCSI_INI_DRIVER_INVALIDATE_CONNECTION (6)
> +#define SUBSYSTEM_ISCSI_INI_DRIVER_OFFLOAD_CONN (6)
> +#define SUBSYSTEM_ISCSI_INI_BTL_MAPPING_QUERY_OS_BT_INUSE (6)
> +#define SUBSYSTEM_ISCSI_INI_BTL_MAPPING_MAX_OS_SUPPORTED_BTL (6)
> +#define SUBSYSTEM_ISCSI_INI_STATS_GET_INSTANCE_STATISTICS (6)
> +#define SUBSYSTEM_ISCSI_INI_STATS_GET_LOGIN_STATISTICS (6)
> +#define SUBSYSTEM_ISCSI_INI_STATS_GET_SESSION_ATTRIBUTES (6)
> +#define SUBSYSTEM_ISCSI_INI_STATS_GET_A_SESSION_STATISTICS (6)
> +#define SUBSYSTEM_ISCSI_INI_STATS_GET_CONN_STATISTICS_PER_SESSION (6)
> +#define SUBSYSTEM_ISCSI_INI_STATS_GET_IPSEC_STATISTICS (6)
> +#define SUBSYSTEM_ISCSI_INI_BOOT_GET_BOOT_TARGET (6)
> +#define SUBSYSTEM_ISCSI_INI_BOOT_SET_BOOT_TARGET (6)
> +#define SUBSYSTEM_ISCSI_INI_BOOT_GET_BOOT_LUN (6)
> +#define SUBSYSTEM_ISCSI_INI_BOOT_SET_BOOT_LUN (6)
> +#define SUBSYSTEM_ISCSI_INI_BOOT_READ_WRITE (6)
> +#define SUBSYSTEM_ISCSI_INI_BOOT_GET_BIOS_CONFIGURATION (6)
> +#define SUBSYSTEM_ISCSI_INI_BOOT_SET_BIOS_CONFIGURATION (6)
> +#define SUBSYSTEM_ISCSI_INI_SCSI_PASS_THRU (6)
> +#define OPCODE_ISCSI_INI_CFG_SET_HBA_NAME (7)
> +#define OPCODE_ISCSI_INI_CFG_SET_HBA_TIME (8)
> +#define OPCODE_ISCSI_INI_CFG_GET_CHAP_SECRET (9)
> +#define OPCODE_ISCSI_INI_CFG_SET_CHAP_SECRET (10)
> +#define OPCODE_ISCSI_INI_CFG_GET_HBA_STATUS (11)
> +#define OPCODE_ISCSI_INI_SESSION_GET_ALL_SESSIONS (12)
> +#define OPCODE_ISCSI_INI_SESSION_GET_SESSION_LIST (13)
> +#define OPCODE_ISCSI_INI_SESSION_GET_A_SESSION (14)
> +#define OPCODE_ISCSI_INI_SESSION_GET_ALL_CONNECTIONS (15)
> +#define OPCODE_ISCSI_INI_SESSION_GET_CONFIGURATION (16)
> +#define OPCODE_ISCSI_INI_SESSION_SET_CONFIGURATION (17)
> +#define OPCODE_ISCSI_INI_SESSION_GET_CONFIGURATION_LIST (18)
> +#define OPCODE_ISCSI_INI_SESSION_MODIFY_SESSION_LOGINKEYS (19)
> +#define OPCODE_ISCSI_INI_SESSION_MODIFY_CONNECTION_LOGINKEYS (20)
> +#define OPCODE_ISCSI_INI_SESSION_ADD_CONNECTION_TO_SESSION (21)
> +#define OPCODE_ISCSI_INI_SESSION_CLOSE_CONNECTION (22)
> +#define OPCODE_ISCSI_INI_SESSION_LOGIN_TARGET (23)
> +#define OPCODE_ISCSI_INI_SESSION_LOGOUT_TARGET (24)
> +#define OPCODE_ISCSI_INI_SESSION_GET_ALL_PLOGIN_TGTNAME_PORTAL (25)
> +#define OPCODE_ISCSI_INI_SESSION_QUERY_A_PERSISTENT_LOGIN (26)
> +#define OPCODE_ISCSI_INI_SESSION_QUERY_PERSISTENT_LOGINS (27)
> +#define OPCODE_ISCSI_INI_SESSION_ADD_PERSISTENT_LOGIN (28)
> +#define OPCODE_ISCSI_INI_SESSION_DELETE_PERSISTENT_LOGIN (29)
> +#define OPCODE_ISCSI_INI_SESSION_GET_ALL_SESSION_ID (30)
> +#define OPCODE_ISCSI_INI_DISCOVERY_GET_ALL_DISCOVERED_TARGET_ID (31)
> +#define OPCODE_ISCSI_INI_DISCOVERY_REPORT_ALL_TARGETS (32)
> +#define OPCODE_ISCSI_INI_DISCOVERY_REPORT_A_TARGET (33)
> +#define OPCODE_ISCSI_INI_DISCOVERY_SEND_TARGETS (34)
> +#define OPCODE_ISCSI_INI_RETRIEVE_PARSED_TARGET_INFO (35)
> +#define OPCODE_ISCSI_INI_DRIVER_REOPEN_A_SESSION (36)
> +#define OPCODE_ISCSI_INI_DRIVER_REOPEN_ALL_SESSIONS (37)
> +#define OPCODE_ISCSI_INI_DRIVER_REOPEN_A_CONN (38)
> +#define OPCODE_ISCSI_INI_DRIVER_DEL_ALL_NONPERSISTENT_SESSIONS (39)
> +#define OPCODE_ISCSI_INI_DRIVER_STORE_NONPERSISTENT_SESSIONS (40)
> +#define OPCODE_ISCSI_INI_DRIVER_LOGIN_ALL_SESSIONS (41)
> +#define OPCODE_ISCSI_INI_DRIVER_OFFLOAD_SESSION (42)
> +#define OPCODE_ISCSI_INI_DRIVER_INVALIDATE_CONNECTION (43)
> +#define OPCODE_ISCSI_INI_DRIVER_OFFLOAD_CONN (44)
> +#define OPCODE_ISCSI_INI_BTL_MAPPING_QUERY_OS_BT_INUSE (45)
> +#define OPCODE_ISCSI_INI_BTL_MAPPING_MAX_OS_SUPPORTED_BTL (46)
> +#define OPCODE_ISCSI_INI_STATS_GET_INSTANCE_STATISTICS (47)
> +#define OPCODE_ISCSI_INI_STATS_GET_LOGIN_STATISTICS (48)
> +#define OPCODE_ISCSI_INI_STATS_GET_SESSION_ATTRIBUTES (49)
> +#define OPCODE_ISCSI_INI_STATS_GET_A_SESSION_STATISTICS (50)
> +#define OPCODE_ISCSI_INI_STATS_GET_CONN_STATISTICS_PER_SESSION (51)
> +#define OPCODE_ISCSI_INI_STATS_GET_IPSEC_STATISTICS (52)
> +#define OPCODE_ISCSI_INI_BOOT_GET_BOOT_TARGET (53)
> +#define OPCODE_ISCSI_INI_BOOT_SET_BOOT_TARGET (54)
> +#define OPCODE_ISCSI_INI_BOOT_GET_BOOT_LUN (55)
> +#define OPCODE_ISCSI_INI_BOOT_SET_BOOT_LUN (56)
> +#define OPCODE_ISCSI_INI_BOOT_READ_WRITE (57)
> +#define OPCODE_ISCSI_INI_BOOT_GET_BIOS_CONFIGURATION (58)
> +#define OPCODE_ISCSI_INI_BOOT_SET_BIOS_CONFIGURATION (59)
> +#define OPCODE_ISCSI_INI_SCSI_PASS_THRU (60)
> +
> +
> +/*
> + * --- ISCSI_TGT_SUBSYSTEM_OPCODES ---
> + * Opcodes in the IOCTL_SUBSYSTEM_ISCSI_TGT subsystem.
> + */
> +#define OPCODE_ISCSI_TGT_START_LISTEN_SERVER (1)
> +#define OPCODE_ISCSI_TGT_STOP_LISTEN_SERVER (2)
> +#define OPCODE_ISCSI_TGT_GET_CONNECTION_INFO (3)
> +#define OPCODE_ISCSI_TGT_CONNECTION_REJECT (4)
> +#define OPCODE_ISCSI_TGT_OFFLOAD_CONNECTION (5)
> +#define OPCODE_ISCSI_TGT_ISNS_SEND_PACKET (6)
> +#define SUBSYSTEM_ISCSI_TGT_START_LISTEN_SERVER (7)
> +#define SUBSYSTEM_ISCSI_TGT_STOP_LISTEN_SERVER (7)
> +#define SUBSYSTEM_ISCSI_TGT_GET_CONNECTION_INFO (7)
> +#define SUBSYSTEM_ISCSI_TGT_CONNECTION_REJECT (7)
> +#define SUBSYSTEM_ISCSI_TGT_OFFLOAD_CONNECTION (7)
> +#define SUBSYSTEM_ISCSI_TGT_ISNS_SEND_PACKET (7)
> +#define OPCODE_ISCSI_TGT_INVALIDATE_CONNECTION (7)
> +#define SUBSYSTEM_ISCSI_TGT_INVALIDATE_CONNECTION (7)
> +#define SUBSYSTEM_ISCSI_TGT_ADD_IP_ADDR (7)
> +#define SUBSYSTEM_ISCSI_TGT_DELETE_IP_ADDR (7)
> +#define SUBSYSTEM_ISCSI_TGT_LIST_IP_ADDR (7)
> +#define SUBSYSTEM_ISCSI_TGT_START_ESI_LISTEN (7)
> +#define SUBSYSTEM_ISCSI_TGT_STOP_ESI_LISTEN (7)
> +#define SUBSYSTEM_ISCSI_TGT_SLP_REGISTER (7)
> +#define SUBSYSTEM_ISCSI_TGT_SLP_DEREGISTER (7)
> +#define OPCODE_ISCSI_TGT_ADD_IP_ADDR (8)
> +#define OPCODE_ISCSI_TGT_DELETE_IP_ADDR (9)
> +#define OPCODE_ISCSI_TGT_LIST_IP_ADDR (10)
> +#define OPCODE_ISCSI_TGT_START_ESI_LISTEN (11)
> +#define OPCODE_ISCSI_TGT_STOP_ESI_LISTEN (12)
> +#define OPCODE_ISCSI_TGT_SLP_REGISTER (13)
> +#define OPCODE_ISCSI_TGT_SLP_DEREGISTER (14)
> +
> +
> +/*
> + * --- MILI_PTL_SUBSYSTEM_OPCODES ---
> + * Opcodes in the IOCTL_SUBSYSTEM_MILI_PTL subsystem.
> + */
> +#define OPCODE_MILI_PTL_CREATE_PORTAL (1)
> +#define OPCODE_MILI_PTL_DELETE_PORTAL (2)
> +#define OPCODE_MILI_PTL_CREATE_PORTAL_GROUP (3)
> +#define OPCODE_MILI_PTL_DELETE_PORTAL_GROUP (4)
> +#define OPCODE_MILI_PTL_ADD_PORTAL_TO_PORTAL_GROUP (5)
> +#define OPCODE_MILI_PTL_DELETE_PORTAL_FROM_PORTAL_GROUP (6)
> +#define OPCODE_MILI_PTL_ADD_TARGET (7)
> +#define SUBSYSTEM_MILI_PTL_CREATE_PORTAL (8)
> +#define SUBSYSTEM_MILI_PTL_DELETE_PORTAL (8)
> +#define SUBSYSTEM_MILI_PTL_CREATE_PORTAL_GROUP (8)
> +#define SUBSYSTEM_MILI_PTL_DELETE_PORTAL_GROUP (8)
> +#define SUBSYSTEM_MILI_PTL_ADD_PORTAL_TO_PORTAL_GROUP (8)
> +#define SUBSYSTEM_MILI_PTL_DELETE_PORTAL_FROM_PORTAL_GROUP (8)
> +#define SUBSYSTEM_MILI_PTL_ADD_TARGET (8)
> +#define OPCODE_MILI_PTL_DELETE_TARGET (8)
> +#define SUBSYSTEM_MILI_PTL_DELETE_TARGET (8)
> +#define SUBSYSTEM_MILI_PTL_ADD_PORTAL_GROUP_TO_TARGET (8)
> +#define SUBSYSTEM_MILI_PTL_DELETE_PORTAL_GROUP_FROM_TARGET (8)
> +#define SUBSYSTEM_MILI_PTL_SET_TARGET_LOGIN_PARAMS (8)
> +#define SUBSYSTEM_MILI_PTL_START_LISTEN_SERVER (8)
> +#define SUBSYSTEM_MILI_PTL_STOP_LISTEN_SERVER (8)
> +#define SUBSYSTEM_MILI_PTL_MIB_GET_ISCSI_INSTANCE_ATTRIBUTES (8)
> +#define SUBSYSTEM_MILI_PTL_MIB_GET_ISCSI_INSTANCE_SSN_ERROR_STATS (8)
> +#define SUBSYSTEM_MILI_PTL_MIB_GET_ISCSI_TARGET_ATTRIBUTES (8)
> +#define SUBSYSTEM_MILI_PTL_MIB_GET_ISCSI_TARGET_LOGIN_LOGOUT_STATS (8)
> +#define SUBSYSTEM_MILI_PTL_MIB_GET_ISCSI_SESSION_ATTRIBUTES_AND_STATS (8)
> +#define SUBSYSTEM_MILI_PTL_MIB_GET_ISCSI_CONNECTION_ATTRIBUTES_AND_STATS (8)
> +#define SUBSYSTEM_MILI_PTL_GET_ISCSI_SESSION_LIST (8)
> +#define SUBSYSTEM_MILI_PTL_KILL_SESSION (8)
> +#define OPCODE_MILI_PTL_ADD_PORTAL_GROUP_TO_TARGET (9)
> +#define OPCODE_MILI_PTL_DELETE_PORTAL_GROUP_FROM_TARGET (10)
> +#define OPCODE_MILI_PTL_SET_TARGET_LOGIN_PARAMS (11)
> +#define OPCODE_MILI_PTL_START_LISTEN_SERVER (12)
> +#define OPCODE_MILI_PTL_STOP_LISTEN_SERVER (13)
> +#define OPCODE_MILI_PTL_MIB_GET_ISCSI_INSTANCE_ATTRIBUTES (14)
> +#define OPCODE_MILI_PTL_MIB_GET_ISCSI_INSTANCE_SSN_ERROR_STATS (15)
> +#define OPCODE_MILI_PTL_MIB_GET_ISCSI_TARGET_ATTRIBUTES (16)
> +#define OPCODE_MILI_PTL_MIB_GET_ISCSI_TARGET_LOGIN_LOGOUT_STATS (17)
> +#define OPCODE_MILI_PTL_MIB_GET_ISCSI_SESSION_ATTRIBUTES_AND_STATS (18)
> +#define OPCODE_MILI_PTL_MIB_GET_ISCSI_CONNECTION_ATTRIBUTES_AND_STATS (19)
> +#define OPCODE_MILI_PTL_GET_ISCSI_SESSION_LIST (20)
> +#define OPCODE_MILI_PTL_KILL_SESSION (21)
> +
> +/*
> + * --- MILI_TMD_SUBSYSTEM_OPCODES ---
> + * Opcodes in the IOCTL_SUBSYSTEM_MILI_TMD subsystem.
> + */
> +#define OPCODE_MILI_TMD_ADD_TARGET (1)
> +#define OPCODE_MILI_TMD_DELETE_TARGET (2)
> +#define OPCODE_MILI_TMD_UPDATE_TARGET_AUTH_PARAMS (3)
> +#define OPCODE_MILI_TMD_ADD_INITIATOR (4)
> +#define OPCODE_MILI_TMD_DELETE_INITIATOR (5)
> +#define OPCODE_MILI_TMD_UPDATE_INITIATOR_AUTH_PARAMS (6)
> +#define OPCODE_MILI_TMD_BIND_INITIATOR_TO_TARGET (7)
> +#define OPCODE_MILI_TMD_DELETE_IT_BINDING (8)
> +#define SUBSYSTEM_MILI_TMD_ADD_TARGET (9)
> +#define SUBSYSTEM_MILI_TMD_DELETE_TARGET (9)
> +#define SUBSYSTEM_MILI_TMD_UPDATE_TARGET_AUTH_PARAMS (9)
> +#define SUBSYSTEM_MILI_TMD_ADD_INITIATOR (9)
> +#define SUBSYSTEM_MILI_TMD_DELETE_INITIATOR (9)
> +#define SUBSYSTEM_MILI_TMD_UPDATE_INITIATOR_AUTH_PARAMS (9)
> +#define SUBSYSTEM_MILI_TMD_BIND_INITIATOR_TO_TARGET (9)
> +#define SUBSYSTEM_MILI_TMD_DELETE_IT_BINDING (9)
> +#define OPCODE_MILI_TMD_ACTIVATE_TARGET (9)
> +#define SUBSYSTEM_MILI_TMD_ACTIVATE_TARGET (9)
> +#define SUBSYSTEM_MILI_TMD_DEACTIVATE_TARGET (9)
> +#define SUBSYSTEM_MILI_TMD_SET_INITIATOR_QOS (9)
> +#define OPCODE_MILI_TMD_DEACTIVATE_TARGET (10)
> +#define OPCODE_MILI_TMD_SET_INITIATOR_QOS (11)
> +
> +
> +/*
> + * --- ETH_SUBSYSTEM_OPCODES ---
> + * These opcodes are used for configuring the Ethernet interfaces. These
> + * opcodes all use the IOCTL_SUBSYSTEM_ETH subsystem code.
> + */
> +#define OPCODE_ETH_RSS_CONFIG (1)
> +#define OPCODE_ETH_ACPI_CONFIG (2)
> +#define SUBSYSTEM_ETH_RSS_CONFIG (3)
> +#define SUBSYSTEM_ETH_ACPI_CONFIG (3)
> +#define OPCODE_ETH_PROMISCUOUS (3)
> +#define SUBSYSTEM_ETH_PROMISCUOUS (3)
> +#define SUBSYSTEM_ETH_GET_STATISTICS (3)
> +#define SUBSYSTEM_ETH_GET_RX_FRAG_SIZE (3)
> +#define SUBSYSTEM_ETH_SET_RX_FRAG_SIZE (3)
> +#define OPCODE_ETH_GET_STATISTICS (4)
> +#define OPCODE_ETH_GET_RX_FRAG_SIZE (5)
> +#define OPCODE_ETH_SET_RX_FRAG_SIZE (6)
> +
> +
> +/*
> + * --- TPM_SUBSYSTEM_OPCODES ---
> + * These opcodes are used for configuring TCP protocol Module functionality.
> + * These opcodes all use the IOCTL_SUBSYSTEM_COMMON_ISCSI subsystem code.
> + */
> +#define OPCODE_TPM_CONNECTION_OFFLOAD (1)
> +#define OPCODE_TPM_CONNECTION_UPLOAD (2)
> +#define OPCODE_TPM_CONNECTION_UPDATE (3)
> +#define SUBSYSTEM_TPM_CONNECTION_OFFLOAD (4)
> +#define SUBSYSTEM_TPM_CONNECTION_UPLOAD (4)
> +#define SUBSYSTEM_TPM_CONNECTION_UPDATE (4)
> +#define OPCODE_TPM_GET_STATISTICS (4)
> +#define SUBSYSTEM_TPM_GET_STATISTICS (4)
> +#define SUBSYSTEM_TPM_CONNECTION_QUERY (4)
> +#define OPCODE_TPM_CONNECTION_QUERY (5)
> +
> +/*
> + * --- PXE_UNDI_SUBSYSTEM_OPCODES ---
> + * These opcodes are used for configuring PXE and UNDI functionality.
> + * These opcodes use the IOCTL_SUBSYSTEM_PXE_UNDI subsystem code.
> + */
> +#define OPCODE_PXE_UNDI_CONTROL (1)
> +#define OPCODE_PXE_UNDI_TRANSMIT (2)
> +#define OPCODE_PXE_UNDI_RECEIVE (3)
> +#define OPCODE_PXE_UNDI_GET_STATISTICS (4)
> +#define SUBSYSTEM_PXE_UNDI_CONTROL (5)
> +#define SUBSYSTEM_PXE_UNDI_TRANSMIT (5)
> +#define SUBSYSTEM_PXE_UNDI_RECEIVE (5)
> +#define SUBSYSTEM_PXE_UNDI_GET_STATISTICS (5)
> +
> +
> +/*
> + * --- MCC_STATUS_CODE ---
> + * These are the global status codes used by all subsystems
> + */
> +#define MCC_STATUS_SUCCESS (0) /* Indicates a successful
> + completion of the command */
> +#define MCC_STATUS_INSUFFICIENT_PRIVILEGES (1) /* The client does not have
> + sufficient privileges to
> + execute the command */
> +#define MCC_STATUS_INVALID_PARAMETER (2) /* A parameter in the command
> + was invalid. The extended
> + status contains the index
> + of the parameter */
> +#define MCC_STATUS_INSUFFICIENT_RESOURCES (3) /* There are insufficient
> + chip resources to execute
> + the command */
> +#define MCC_STATUS_QUEUE_FLUSHING (4) /* The command is completing
> + because the queue was
> + getting flushed */
> +#define MCC_STATUS_DMA_FAILED (5) /* The command is completing
> + with a DMA error */
> +
> +/*
> + * --- MGMT_ERROR_CODES ---
> + * Error Codes returned in the status field of the IOCTL response header
> + */
> +#define MGMT_STATUS_SUCCESS (0) /* The IOCTL completed
> + without errors */
> +#define MGMT_STATUS_FAILED (1) /* Error status in the Status
> + field of the
> + struct IOCTL_RESPONSE_HEADER */
> +#define MGMT_STATUS_ILLEGAL_REQUEST (2) /* Invalid IOCTL opcode */
> +#define MGMT_STATUS_ILLEGAL_FIELD (3) /* Invalid parameter in
> + the IOCTL payload */
> +/* The buffer provided by MILI is insufficient for Firmware/OSM to
> + * return IOCTL output. Firmware/OSM sets the buffer size requirement in
> + * the required_data_length field. Note: required_data_length must
> + * be larger than expected_data_length.
> + */
> +#define MGMT_STATUS_INSUFFICIENT_BUFFER (4)
> +/* This domain is not permitted to execute such request Applicable to
> + * BE-VM only
> + * */
> +#define MGMT_STATUS_UNAUTHORIZED_REQUEST (5) /* This domain is not
> + permitted to */
> +#define MGMT_STATUS_INVALID_ISNS_ADDRESS (10)
> +#define MGMT_STATUS_INVALID_IPADDR (11)
> +#define MGMT_STATUS_INVALID_GATEWAY (12)
> +#define MGMT_STATUS_INVALID_SUBNETMASK (13)
> +#define MGMT_STATUS_INVALID_PREFERRED_DNS (14)
> +#define MGMT_STATUS_INVALID_ALTERNATE_DNS (15)
> +#define MGMT_STATUS_INVALID_TARGET_IPADDR (16)
> +#define MGMT_STATUS_UNRESOLVED_DNS_NAME (17)
> +#define MGMT_STATUS_INVALID_ISCSI_INI_NAME (18)
> +#define MGMT_STATUS_INVALID_ISCSI_INI_ALIAS (19)
> +#define MGMT_STATUS_TGTTBL_FULL (20)
> +#define MGMT_STATUS_LUNTBL_FULL (21)
> +#define MGMT_STATUS_IPSEC_NOT_SUPPORTED (22)
> +#define MGMT_STATUS_FLASHROM_SAVE_FAILED (23)
> +#define MGMT_STATUS_FLASHROM_RESTORE_FAILED (24)
> +#define MGMT_STATUS_INVALID_TCPPORT (25)
> +#define MGMT_STATUS_ICCBINDEX_ALLOC_FAILED (26)
> +#define MGMT_STATUS_IOCTLHANDLE_ALLOC_FAILED (27)
> +#define MGMT_STATUS_INVALID_PHY_ADDR_FROM_OSM (28) /* Invalid physical
> + address from OSM */
> +#define MGMT_STATUS_INVALID_PHY_ADDR_LEN_FROM_OSM (29)
> +#define MGMT_STATUS_ASSERT_FAILED (30)
> +#define MGMT_STATUS_INVALID_SESSION (31) /* Invalid SESSION id */
> +#define MGMT_STATUS_INVALID_CONNECTION (32) /* Invalid connection id */
> +#define MGMT_STATUS_BTL_PATH_EXCEEDS_OSM_LIMIT (33)
> +#define MGMT_STATUS_BTL_TGTID_EXCEEDS_OSM_LIMIT (34)
> +#define MGMT_STATUS_BTL_PATH_TGTID_OCCUPIED (35) /* In the OSM target
> + table the slot of the
> + specified Path and
> + TargetID is already
> + occupied by another
> + target. */
> +#define MGMT_STATUS_BTL_NO_FREE_SLOT_PATH (36) /* OSM can't locate a free
> + slot in it's target table
> + for the specified path ID
> + */
> +#define MGMT_STATUS_BTL_NO_FREE_SLOT_TGTID (37) /* OSM can't locate a free
> + slot in it's target table
> + for the specified target ID
> + */
> +#define MGMT_STATUS_OSM_DEVSLOT_NOT_FOUND (38) /* OSM can't locate the entry
> + in it's target table for
> + the specified iSCSI
> + SESSION/target
> + */
> +#define MGMT_STATUS_FLASHROM_READ_FAILED (39)
> +#define MGMT_STATUS_POLL_IOCTL_TIMEOUT (40) /* Polling IOCTL is timeout */
> +#define MGMT_STATUS_ERROR_ACITISCSI (41) /* Error returned from
> + ACIT-ISCSI module */
> +#define MGMT_STATUS_ERROR_ACITMAIN (42) /* Error returned from
> + ACIT-Main module */
> +/*
> + * This error indicates that ioctl buffer size is too big for either the
> + * OSM or OS to handle. In Windows, after MILI allocates the
> + * buffer, OS will forward the IOCTL request to the driver
> + * IF the IOCTL buffer size is less than / equal to the
> + * maximum IO size. When the OSM detects this situation,
> + * OSM set this status in the IOCTL header.
> + */
> +#define MGMT_STATUS_BUFFER_SIZE_EXCEED_OSM_OR_OS_LIMIT (43)
> +#define MGMT_STATUS_REBOOT_REQUIRED (44)
> +#define MGMT_STATUS_INSUFFICIENT_TIMEOUT (45)
> +#define MGMT_STATUS_IPADDR_NOT_SET (46)
> +#define MGMT_STATUS_IPADDR_DUP_DETECTED (47)
> +#define MGMT_STATUS_CANT_REMOVE_LAST_CONNECTION (48)
> +#define MGMT_STATUS_TARGET_NOT_FOUND (48)
> +#define MGMT_STATUS_TARGET_BUSY (49)
> +#define MGMT_STATUS_TGT_ERR_LISTEN_SOCKET (50)
> +#define MGMT_STATUS_TGT_ERR_BIND_SOCKET (51)
> +#define MGMT_STATUS_TGT_ERR_NO_SOCKET (52)
> +#define MGMT_STATUS_TGT_ERR_PORTAL_NOT_FOUND (53)
> +#define MGMT_STATUS_TGT_ERR_IP_ADDR_MAX_REACHED (54)
> +#define MGMT_STATUS_TGT_ERR_ISNS_COMM_FAILED (55)
> +#define MGMT_STATUS_CANNOT_DELETE_BOOT_TARGET (56)
> +#define MGMT_STATUS_TGT_PORTAL_MODE_IN_LISTEN (57)
> +
> +
> +/*
> + * --- MGMT_ADDL_STATUS ---
> + * Values for the Additional Status field of IOCTL_RESPONSE_BUFFER. This field
> + */
> +#define MGMT_ADDI_STATUS_NO_STATUS (0)
> +#define MGMT_ADDI_STATUS_INVALID_IPTYPE (1)
> +#define MGMT_ADDI_STATUS_IPV6_UNSUPPORTED (2)
> +#define MGMT_ADDI_STATUS_DNSTEXT_TOO_LONG (3)
> +#define MGMT_ADDI_STATUS_INVALID_INTR_ININAME (4)
> +#define MGMT_ADDI_STATUS_INVALID_TGT_ININAME (5)
> +#define MGMT_ADDI_STATUS_INVALID_ISNS_ININAME (6)
> +#define MGMT_ADDI_STATUS_INVALID_INTR_ALIAS (7)
> +#define MGMT_ADDI_STATUS_INVALID_TGT_ALIAS (8)
> +#define MGMT_ADDI_STATUS_TARGET_HANDLE_NOT_FOUND (9)
> +#define MGMT_ADDI_STATUS_SESSION_HANDLE_NOT_FOUND (10)
> +#define MGMT_ADDI_STATUS_CONNECTION_HANDLE_NOT_FOUND (11)
> +#define MGMT_ADDI_STATUS_PORTALGROUP_HANDLE_NOT_FOUND (12)
> +#define MGMT_ADDI_STATUS_PORTAL_HANDLE_NOT_FOUND (13)
> +#define MGMT_ADDI_STATUS_INVALID_INTR_PORT (14)
> +#define MGMT_ADDI_STATUS_INVALID_TGT_PORT (15)
> +#define MGMT_ADDI_STATUS_ACTIVE_SESSIONS_PRESENT (16)
> +#define MGMT_ADDI_STATUS_SESSION_ALREADY_OPENED (17)
> +#define MGMT_ADDI_STATUS_SESSION_ALREADY_CLOSED (18)
> +#define MGMT_ADDI_STATUS_DEST_HOST_UNREACHABLE (19)
> +#define MGMT_ADDI_STATUS_LOGIN_IN_PROGRESS (20)
> +#define MGMT_ADDI_STATUS_TCP_CONNECT_FAILED (21)
> +#define MGMT_ADDI_STATUS_INSUFFICIENT_RESOURCES (22)
> +#define MGMT_ADDI_STATUS_LINK_DOWN (23)
> +#define MGMT_ADDI_STATUS_DHCP_ERROR (24)
> +#define MGMT_ADDI_STATUS_CONNECTION_OFFLOADED (25)
> +#define MGMT_ADDI_STATUS_CONNECTION_NOT_OFFLOADED (26)
> +#define MGMT_ADDI_STATUS_CONNECTION_UPLOAD_IN_PROGRESS (27)
> +#define MGMT_ADDI_STATUS_REQUEST_REJECTED (28) /* Used to communicate
> + a flush or upload/close
> + request on a connection
> + was rejected by protocol
> + firmware.
> + */
> +#define MGMT_ADDI_STATUS_INVALID_SUBSYSTEM (29)
> +#define MGMT_ADDI_STATUS_INVALID_OPCODE (30)
> +#define MGMT_ADDI_STATUS_INVALID_MAXCONNECTION_PARAM (31)
> +#define MGMT_ADDI_STATUS_INVALID_KEY (32)
> +#define MGMT_ADDI_STATUS_PORTAL_GROUP_BOUND_TO_TARGET (33)
> +#define MGMT_ADDI_STATUS_PORTALS_BOUND_TO_PORTAL_GROUP (34) /* Unbind Portals
> + from Portal Group
> + before deleting */
> +/* The domain number in the IOCTL header
> +* is invalid or out-of-range. The domain number passed-in to the IOCTL
> +* must be <= to the number of domains enabled by the manufacturer.Check the
> +* response data from IOCTL_COMMON_GET_CNTL_ATTRIBUTES to
> +* determine the actual number of domains supported
> +*/
> +#define MGMT_ADDI_STATUS_INVALID_DOMAIN (35)
> +#define MGMT_ADDL_STATUS_TGT_CONN_RST (36)
> +#define MGMT_ADDL_STATUS_TGT_INVALID_CONN_HANDLE (37)
> +#define MGMT_ADDL_STATUS_TGT_INVALID_CID (38)
> +#define MGMT_ADDL_STATUS_TGT_INVALID_CQID (39)
> +#define MGMT_ADDL_STATUS_TGT_INVALID_CHUTE (40)
> +#define MGMT_ADDL_STATUS_CONN_RST (41)
> +#define MGMT_ADDL_STATUS_DUPLICATE_KEY (42)
> +#define MGMT_ADDI_STATUS_LOGIN_INITIATOR_ERROR (43)
> +#define MGMT_ADDI_STATUS_LOGIN_AUTHENTICATION_ERROR (44)
> +#define MGMT_ADDI_STATUS_LOGIN_AUTHORIZATION_ERROR (45)
> +#define MGMT_ADDI_STATUS_LOGIN_NOT_FOUND (46)
> +#define MGMT_ADDI_STATUS_LOGIN_TARGET_REMOVED (47)
> +#define MGMT_ADDI_STATUS_LOGIN_UNSUPPORTED_VERSION (48)
> +#define MGMT_ADDI_STATUS_LOGIN_TOO_MANY_CONNECTIONS (49)
> +#define MGMT_ADDI_STATUS_LOGIN_MISSING_PARAMETER (50)
> +#define MGMT_ADDI_STATUS_LOGIN_NO_SESSION_SPANNING (51)
> +#define MGMT_ADDI_STATUS_LOGIN_SESSION_TYPE_NOT_SUPPORTED (52)
> +#define MGMT_ADDI_STATUS_LOGIN_SESSION_DOES_NOT_EXIST (53)
> +#define MGMT_ADDI_STATUS_LOGIN_INVALID_DURING_LOGIN (54)
> +#define MGMT_ADDI_STATUS_LOGIN_TARGET_ERROR (55)
> +#define MGMT_ADDI_STATUS_LOGIN_SERVICE_UNAVAILABLE (56)
> +#define MGMT_ADDI_STATUS_LOGIN_OUT_OF_RESOURCES (57)
> +#define MGMT_ADDI_STATUS_SAME_CHAP_SECRET (58)
> +#define MGMT_ADDI_STATUS_INVALID_SECRET_LENGTH (59)
> +#define MGMT_ADDI_STATUS_DUPLICATE_ENTRY (60) /* an entry with same
> + attribtues already exists
> + with a different key */
> +#define MGMT_ADDI_STATUS_INITIATOR_HANDLE_NOT_FOUND (61)
> +#define MGMT_ADDI_STATUS_ITBINDING_HANDLE_NOT_FOUND (62)
> +#define MGMT_ADDI_STATUS_SETTINGS_MODIFIED_REBOOT_REQD (63)
> +
> +#endif /* __ioctl_opcodes_amap_h__ */
> diff --git a/drivers/message/beclib/fw/amap/ioctl_top.h b/drivers/message/beclib/fw/amap/ioctl_top.h
> new file mode 100644
> index 0000000..39b2dac
> --- /dev/null
> +++ b/drivers/message/beclib/fw/amap/ioctl_top.h
> @@ -0,0 +1,44 @@
> +/*
> + * Copyright (C) 2005 - 2008 ServerEngines
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or at your option any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, 5th Floor
> + * Boston, MA 02110-1301 USA
> + *
> + *
> + * The full GNU General Public License is included in this distribution
> + * in the file called GPL.
> + *
> + * Contact Information:
> + * linux-drivers@...verengines.com
> + *
> + * ServerEngines
> + * 209 N. Fair Oaks Ave
> + * Sunnyvale, CA 94085
> + */
> +/*
> + * Autogenerated by srcgen version: 0127
> + */
> +#ifndef __ioctl_top_amap_h__
> +#define __ioctl_top_amap_h__
> +#include "asyncmesg.h"
> +#include "ioctl_opcodes.h"
> +#include "ioctl_defs.h"
> +#include "ioctl_types.h"
> +#include "ioctl_mcc.h"
> +#include "ioctl_common.h"
> +#include "ioctl_eth.h"
> +
> +#endif /* __ioctl_top_amap_h__ */
> diff --git a/drivers/message/beclib/fw/amap/ioctl_types.h b/drivers/message/beclib/fw/amap/ioctl_types.h
> new file mode 100644
> index 0000000..85f91ca
> --- /dev/null
> +++ b/drivers/message/beclib/fw/amap/ioctl_types.h
> @@ -0,0 +1,450 @@
> +/*
> + * Copyright (C) 2005 - 2008 ServerEngines
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or at your option any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, 5th Floor
> + * Boston, MA 02110-1301 USA
> + *
> + *
> + * The full GNU General Public License is included in this distribution
> + * in the file called GPL.
> + *
> + * Contact Information:
> + * linux-drivers@...verengines.com
> + *
> + * ServerEngines
> + * 209 N. Fair Oaks Ave
> + * Sunnyvale, CA 94085
> + */
> +/*
> + * Autogenerated by srcgen version: 0127
> + */
> +#ifndef __ioctl_types_amap_h__
> +#define __ioctl_types_amap_h__
> +#include "nativedefs.h"
> +#include "ioctl_defs.h"
> +#include "host_struct.h"
> +#include "post_codes.h"
> +
> +/*
> + * --- IPVERSIONS ---
> + * Defintion for IPVersion in IP_ADDRESS_SUBNET_FORMAT and IP_ADDRESS_FORMAT
> + */
> +#define IPVERSION_V4 (0)
> +#define IPVERSION_V6 (1)
> +
> +/* MAC address format */
> +struct BE_MAC_ADDRESS_FORMAT_AMAP {
> + struct BE_UEXACT16_AMAP SizeOfStructure;
> + struct BE_UEXACT8_AMAP MACAddress[6];
> +} SG_PACK;
> +struct MAC_ADDRESS_FORMAT_AMAP {
> + u32 dw[2];
> +};
> +
No, a large device specific management interface using ioctl's (with no documentation)
is not going to be accepted.
___________________________________________________________________________________
This message, together with any attachment(s), contains confidential and proprietary information of
ServerEngines Corporation and is intended only for the designated recipient(s) named above. Any unauthorized
review, printing, retention, copying, disclosure or distribution is strictly prohibited. If you are not the
intended recipient of this message, please immediately advise the sender by reply email message and
delete all copies of this message and any attachment(s). Thank you.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists