| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080518112247.GA10502@yamamaya.is-a-geek.org>
Date: Sun, 18 May 2008 13:22:48 +0200
From: Tobias Diedrich <ranma+kernel@...edrich.de>
To: "Rafael J. Wysocki" <rjw@...k.pl>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Ayaz Abdulla <aabdulla@...dia.com>
Subject: Re: hibernate event order question
Rafael J. Wysocki wrote:
> On Sunday, 18 of May 2008, Tobias Diedrich wrote:
> > Tobias Diedrich wrote:
> > > > > Shouldn't there be a 'prepare for poweroff'-callback, which gets
> > > > > called
> > > > > before the system is powered off for real?
> > > >
> > > > Yes, it should and it's called in recent kernels.
> > >
> > > For what values of 'recent'?
> > > I'm running 2.6.26-rc2 here. :)
> > > How do I hook into this callback?
> > > (suspend_late maybe? Going to try that one next...)
> >
> > Ok, this patch fixes the 'regression' introduced by the previous
> > patch (at least for me ;)):
>
> Well, what exactly do you do to hibernate the box?
/usr/local/bin/s2disk:
|#!/bin/sh
|
|SYSPRINTK=/proc/sys/kernel/printk
|OLDPRINTK=$(cat $SYSPRINTK)
|chvt 1
|# work around forcedeth wake-on-lan bug
|#rmmod forcedeth
|echo 9 > $SYSPRINTK
|# shutdown/reboot/platform
|echo shutdown > /sys/power/disk
|echo disk > /sys/power/state
|echo "$OLDPRINTK" > $SYSPRINTK
|# work around forcedeth wake-on-lan bug
|#modprobe forcedeth
|#brctl addif br0 eth0
|#brctl addif br0 eth1
|#ifconfig eth0 up
|#ifconfig eth1 up
I now also now why I get the 'swapped mac' problem:
In my case (DEV_HAS_CORRECT_MACADDR unset and
NVREG_TRANSMITPOLL_MAC_ADDR_REV unset on probe)
nv_probe() reads the original macaddress in reversed order to
correct it and sets NVREG_TRANSMITPOLL_MAC_ADDR_REV.
However the suspend/resume path does not touch the mac address at
all, so after a cold boot and resume from disk the macaddress is
again in 'BIOS order' and NVREG_TRANSMITPOLL_MAC_ADDR_REV is unset,
but NVREG_TRANSMITPOLL_MAC_ADDR_REV gets set unconditionally in
nv_resume(), so the net effect is that the MAC is now reversed.
With the promisc fix this is hidden for my brige setup and only
noticeable at the next hibernate, where I now have to use a reversed
MAC to wakeup the device.
The following patch (on top of the other two) fixes this by saving
and restoring the memory mapped device configuration space in
suspend/resume. The shutdown hook is still needed since the promisc
mode seems to be incompatible with wake on lan.
It also reorders the code in suspend/resume to match that in e100/e1000e.
(configuration space is also saved for devices that are not running)
Index: linux-2.6.26-rc2.forcedwol/drivers/net/forcedeth.c
===================================================================
--- linux-2.6.26-rc2.forcedwol.orig/drivers/net/forcedeth.c 2008-05-18 11:26:12.000000000 +0200
+++ linux-2.6.26-rc2.forcedwol/drivers/net/forcedeth.c 2008-05-18 13:00:23.000000000 +0200
@@ -426,6 +426,7 @@
#define NV_PCI_REGSZ_VER1 0x270
#define NV_PCI_REGSZ_VER2 0x2d4
#define NV_PCI_REGSZ_VER3 0x604
+#define NV_PCI_REGSZ_MAX 0x604
/* various timeout delays: all in usec */
#define NV_TXRX_RESET_DELAY 4
@@ -784,6 +785,9 @@
/* flow control */
u32 pause_flags;
+
+ /* power saved state */
+ u32 saved_config_space[NV_PCI_REGSZ_MAX/4];
};
/*
@@ -5785,19 +5789,24 @@
{
struct net_device *dev = pci_get_drvdata(pdev);
struct fe_priv *np = netdev_priv(dev);
-
- if (!netif_running(dev))
- goto out;
+ u8 __iomem *base = get_hwbase(dev);
+ int i;
netif_device_detach(dev);
- // Gross.
- nv_close(dev);
+ if (netif_running(dev)) {
+ // Gross.
+ nv_close(dev);
+ }
+
+ /* save non-pci configuration space */
+ for (i = 0;i <= np->register_size/sizeof(u32); i++)
+ np->saved_config_space[i] = readl(base + i*sizeof(u32));
pci_save_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, state), np->wolenabled);
+ pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
-out:
return 0;
}
@@ -5805,27 +5814,25 @@
static int nv_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
+ struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
- int rc = 0;
- u32 txreg;
-
- if (!netif_running(dev))
- goto out;
-
- netif_device_attach(dev);
+ int i, rc = 0;
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+ /* ack any pending wake events, disable PME */
pci_enable_wake(pdev, PCI_D0, 0);
- /* restore mac address reverse flag */
- txreg = readl(base + NvRegTransmitPoll);
- txreg |= NVREG_TRANSMITPOLL_MAC_ADDR_REV;
- writel(txreg, base + NvRegTransmitPoll);
+ /* restore non-pci configuration space */
+ for (i = 0;i <= np->register_size/sizeof(u32); i++)
+ writel(np->saved_config_space[i], base+i*sizeof(u32));
+
+ netif_device_attach(dev);
+ if (netif_running(dev)) {
+ rc = nv_open(dev);
+ nv_set_multicast(dev);
+ }
- rc = nv_open(dev);
- nv_set_multicast(dev);
-out:
return rc;
}
@@ -5833,7 +5840,6 @@
{
struct net_device *dev = pci_get_drvdata(pdev);
struct fe_priv *np = netdev_priv(dev);
- u8 __iomem *base = get_hwbase(dev);
if (netif_running(dev))
nv_close(dev);
@@ -5841,7 +5847,9 @@
pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
pci_enable_wake(pdev, PCI_D3cold, np->wolenabled);
pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
+ if (np->wolenabled)
+ pci_set_power_state(pdev, PCI_D3hot);
+ else pci_set_power_state(pdev, PCI_D3cold);
}
#else
#define nv_suspend NULL
--
Tobias PGP: http://9ac7e0bc.uguu.de
このメールは十割再利用されたビットで作られています。
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists