[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20080610210918.11186.64253.stgit@dale>
Date: Tue, 10 Jun 2008 17:09:18 -0400
From: Ramachandra K <ramachandra.kuchimanchi@...gic.com>
To: rdreier@...co.com, general@...ts.openfabrics.org,
netdev@...r.kernel.org
Cc: poornima.kamath@...gic.com, amar.mudrankit@...gic.com
Subject: [PATCH v4 14/14] QLogic VNIC: sysfs Documentation
From: Amar Mudrankit <amar.mudrankit@...gic.com>
This patch adds the file sysfs-class-infiniband-qlgc-vnic which
describes the sysfs files managed by QLogic VNIC.
Signed-off-by: Ramachandra K <ramachandra.kuchimanchi@...gic.com>
Signed-off-by: Poornima Kamath <poornima.kamath@...gic.com>
Signed-off-by: Amar Mudrankit <amar.mudrankit@...gic.com>
---
.../ABI/testing/sysfs-class-infiniband-qlgc-vnic | 179 ++++++++++++++++++++
1 files changed, 179 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-class-infiniband-qlgc-vnic
diff --git a/Documentation/ABI/testing/sysfs-class-infiniband-qlgc-vnic b/Documentation/ABI/testing/sysfs-class-infiniband-qlgc-vnic
new file mode 100644
index 0000000..6cf22ac
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-infiniband-qlgc-vnic
@@ -0,0 +1,179 @@
+What: /sys/class/infiniband_qlgc_vnic/
+Date: June 2008
+KernelVersion: 2.6.27
+Contact: Ramachandra K <ramachandra.kuchimanchi@...gic.com>
+Description:
+
+sysfs interface:
+----------------
+
+The QLogic Virtual NIC module when loaded on host creates following set of
+files into the sysfs:
+
+/sys/class/infiniband_qlgc_vnic/interfaces
+
+ create_vnic (0200) To create a new VNIC interface, write the name
+ of the interface to this file.
+
+ delete_vnic (0200) To delete an existing VNIC interface, write
+ name of that VNIC interface to this file.
+
+/sys/class/infiniband_qlgc_vnic/interfaces/<VNIC-interface-name>/
+
+ vnic_state (0444) State of the VNIC interface.
+
+ current_path (0444) In case of failover configuration, which
+ connection among the primary and secondary is
+ currently being used.
+
+ multicast (0644) Get/Set IB multicast value for the VNIC
+ interface. Only root can Enable/Disable IB
+ multicast for that VNIC interface.
+
+ rx_csum (0644) Get/Set receive checksum boolean value for VNIC
+ interface. Only root can Enable/Disable the
+ receive checksum operation for that VNIC
+ interface.
+
+ tx_csum (0644) Get/Set transmit checksum boolean value for VNIC
+ interface. Only root can Enable/Disable the
+ transmit checksum operation for that VNIC
+ interface.
+
+/sys/class/infiniband_qlgc_vnic/interfaces/<VNIC-interface-name>/[primary-secondary]_path
+
+ dgid (0644) Get/set destination GID value for this
+ connection of VNIC interface.
+
+ hca_info (0444) Get the information about the HCA and IB port
+ through which this connection has been
+ configured.
+
+ heartbeat (0644) Get/Set the heartbeat value for this connection
+ of VNIC interface.
+
+ instance (0644) Get/Set instance number associated with this
+ connection of VNIC interface.
+
+ ioc_guid (0644) Set/Get GUID value of I/O Controller to which
+ this connection of VNIC interface should be/is
+ connecting to.
+
+ ioc_string (0644) Set/Get string value of I/O Controller to which
+ this connection of VNIC interface should be/is
+ connecting to.
+
+ link_state (0444) Link state for this connection.
+
+ multicast_state (0444) IB multicast state for this connection.
+
+ pkey (0644) Get/Set pkey value for this connection of VNIC
+ interface.
+
+ viport_state (0444) Viport state of this connection.
+
+/sys/class/infiniband_qlgc_vnic/vnic-<HCA-name>-<IB-port-no>
+
+ create_primary (0200) Write the name of the VNIC interface to this
+ file to create primary connection for VNIC
+ interface through given HCA and port, once all
+ parameters required for connection establishment
+ has been already set into primary_path of the
+ VNIC interface.
+
+ create_secondary(0200) Write the name of the VNIC interface to this
+ file to create secondary connection for VNIC
+ interface through given HCA and port, once all
+ parameters required for connection establishment
+ has been already set into secondary_path of the
+ VNIC interface.
+
+/sys/class/infiniband_qlgc_vnic/interfaces/<VNIC-interface-name>/stats
+
+ carrier_losses (0444) No of times the carrier loss was
+ detected for this VNIC interface.
+
+ connection_time (0444) Amount of time this VNIC was in
+ connected state.
+
+ disconnects (0444) No of times this VNIC interface got
+ disconnected from EVIC.
+
+ failed_xmits (0444) No of transmits over this VNIC interface
+ that have failed.
+
+ lifetime (0444) Amount of time elapsed since this VNIC
+ interface was created.
+
+ multicast_recvs (0444) No of IB multicast packets received over
+ this VNIC interface.
+
+ recvs (0444) Total no of packets received on this
+ VNIC interface.
+
+ xmits (0444) Total no of packets that have been
+ successfully transmitted over this VNIC
+ interface.
+
+ total_recv_time (0444) Amount of time taken in receive
+ processing, from the time driver got the
+ receive completion till the skb was sent
+ to kernel.
+
+ total_xmit_time (0444) Amount of time taken in transmit
+ processing, from the time skb was
+ received from kernel till a RDMA write
+ was done for it.
+
+ total_disconn_time (0444) Amount of time this VNIC interface was/is
+ in disconnected state.
+
+ total_carrier_loss_time (0444) Amount of time there was no carrier
+ present for this VNIC interface.
+
+Example:
+--------
+
+QLogic VNIC sysfs interface can be used directly to create a VNIC interface.
+
+# echo the name of new VNIC interface to create_vnic
+echo -n veth1 > /sys/class/infiniband_qlgc_vnic/interfaces/create_vnic
+
+# echo parameters to configure the VNIC interface. Some of these are
+# interface level parameters which needs to be passed only once per VNIC
+# interface.
+
+echo -n true > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/rx_csum
+echo -n false > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/tx_csum
+echo -n false > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/multicast
+
+echo -n 00066a01de000037 > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/primary_path/ioc_guid
+echo -n fe8000000000000100066a11de000037 > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/primary_path/dgid
+echo -n ffff > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/primary_path/pkey
+echo -n 0 > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/primary_path/instance
+echo -n 100 > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/primary_path/heartbeat
+string="EVIC in Chassis 0x00066a00db000010, Slot 4, Ioc 1"
+echo -n $string > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/primary_path/ioc_string
+
+# Trigger the connection establishment process for the path by choosing required
+# HCA and IB port combination.
+
+echo -n veth1 > /sys/class/infiniband_qlgc_vnic/vnic-mlx4_0-1/create_primary
+
+# In case of failover configuration, pass the parameters of the failover
+# connection to the driver and trigger its connection establishment
+# process.
+
+echo -n 00066a01de000037 > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/secondary_path/ioc_guid
+echo -n fe8000000000000100066a11de000037 > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/secondary_path/dgid
+echo -n ffff > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/secondary_path/pkey
+echo -n 1 > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/secondary_path/instance
+echo -n 100 > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/secondary_path/heartbeat
+string="EVIC in Chassis 0x00066a00db000010, Slot 4, Ioc 1"
+echo -n $string > /sys/class/infiniband_qlgc_vnic/interfaces/veth1/secondary_path/ioc_string
+
+echo -n veth1 > /sys/class/infiniband_qlgc_vnic/vnic-mlx4_0-2/create_secondary
+
+# An interface can be deleted by echoing the name of the interface to be deleted
+# to delete_vnic file
+echo -n veth1 > /sys/class/infiniband_qlgc_vnic/interfaces/delete_vnic
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists