lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20080617083220.GA11393@elte.hu>
Date:	Tue, 17 Jun 2008 10:32:20 +0200
From:	Ingo Molnar <mingo@...e.hu>
To:	David Miller <davem@...emloft.net>
Cc:	kuznet@....inr.ac.ru, vgusev@...nvz.org, mcmanus@...ksong.com,
	xemul@...nvz.org, netdev@...r.kernel.org,
	ilpo.jarvinen@...sinki.fi, linux-kernel@...r.kernel.org,
	e1000-devel@...ts.sourceforge.net,
	"Rafael J. Wysocki" <rjw@...k.pl>
Subject: Re: [TCP]: TCP_DEFER_ACCEPT causes leak sockets


* Ingo Molnar <mingo@...e.hu> wrote:

> 
> > FWIW I don't think your TX timeout problem has anything to do with 
> > packet ordering.  The TX element of the network device is totally 
> > stateless, but it's hanging under some set of circumstances to the 
> > point where we timeout and reset the hardware to get it going again.
> 
> ok. That's e1000 then. Cc:s added. Stock T60 laptop, 32-bit:
> 
> 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
>         Subsystem: Lenovo ThinkPad T60
>         Flags: bus master, fast devsel, latency 0, IRQ 16
>         Memory at ee000000 (32-bit, non-prefetchable) [size=128K]
>         I/O ports at 2000 [size=32]
>         Capabilities: <access denied>
>         Kernel driver in use: e1000
> 
> the problem is this non-fatal warning showing up after bootup, 
> sporadically, in a non-reproducible way:
> 
> [  173.354049] NETDEV WATCHDOG: eth0: transmit timed out
> [  173.354148] ------------[ cut here ]------------
> [  173.354221] WARNING: at net/sched/sch_generic.c:222 dev_watchdog+0x9a/0xec()
> [  173.354298] Modules linked in:
> [  173.354421] Pid: 13452, comm: cc1 Tainted: G        W 2.6.26-rc6-00273-g81ae43a-dirty #2573
> [  173.354516]  [<c01250ca>] warn_on_slowpath+0x46/0x76
> [  173.354641]  [<c011d428>] ? try_to_wake_up+0x1d6/0x1e0
> [  173.354815]  [<c01411e9>] ? trace_hardirqs_off+0xb/0xd
> [  173.357370]  [<c011d43d>] ? default_wake_function+0xb/0xd
> [  173.357370]  [<c014112a>] ? trace_hardirqs_off_caller+0x15/0xc9
> [  173.357370]  [<c01411e9>] ? trace_hardirqs_off+0xb/0xd
> [  173.357370]  [<c0142c83>] ? trace_hardirqs_on+0xb/0xd
> [  173.357370]  [<c0142b33>] ? trace_hardirqs_on_caller+0x16/0x15b
> [  173.357370]  [<c0142c83>] ? trace_hardirqs_on+0xb/0xd
> [  173.357370]  [<c06bb3c9>] ? _spin_unlock_irqrestore+0x5b/0x71
> [  173.357370]  [<c0133d46>] ? __queue_work+0x2d/0x32
> [  173.357370]  [<c0134023>] ? queue_work+0x50/0x72
> [  173.357483]  [<c0134059>] ? schedule_work+0x14/0x16
> [  173.357654]  [<c05c59b8>] dev_watchdog+0x9a/0xec
> [  173.357783]  [<c012d456>] run_timer_softirq+0x13d/0x19d
> [  173.357905]  [<c05c591e>] ? dev_watchdog+0x0/0xec
> [  173.358073]  [<c05c591e>] ? dev_watchdog+0x0/0xec
> [  173.360804]  [<c0129ad7>] __do_softirq+0xb2/0x15c
> [  173.360804]  [<c0129a25>] ? __do_softirq+0x0/0x15c
> [  173.360804]  [<c0105526>] do_softirq+0x84/0xe9
> [  173.360804]  [<c0129996>] irq_exit+0x4b/0x88
> [  173.360804]  [<c010ec7a>] smp_apic_timer_interrupt+0x73/0x81
> [  173.360804]  [<c0103ddd>] apic_timer_interrupt+0x2d/0x34
> [  173.360804]  =======================
> [  173.360804] ---[ end trace a7919e7f17c0a725 ]---
> 
> full report can be found at:
> 
>    http://lkml.org/lkml/2008/6/13/224
> 
> i have 3 other test-systems with e1000 (with a similar CPU) which are 
> _not_ showing this symptom, so this could be some model-specific e1000 
> issue.

btw., this reminds me that this is the same system that has a serious 
e1000 network latency bug which i have reported more than a year ago, 
but which still does not appear to be fixed in latest mainline:

 PING europe (10.0.1.15) 56(84) bytes of data.
 64 bytes from europe (10.0.1.15): icmp_seq=1 ttl=64 time=1.51 ms
 64 bytes from europe (10.0.1.15): icmp_seq=2 ttl=64 time=404 ms
 64 bytes from europe (10.0.1.15): icmp_seq=3 ttl=64 time=487 ms
 64 bytes from europe (10.0.1.15): icmp_seq=4 ttl=64 time=296 ms
 64 bytes from europe (10.0.1.15): icmp_seq=5 ttl=64 time=305 ms
 64 bytes from europe (10.0.1.15): icmp_seq=6 ttl=64 time=1011 ms
 64 bytes from europe (10.0.1.15): icmp_seq=7 ttl=64 time=0.209 ms
 64 bytes from europe (10.0.1.15): icmp_seq=8 ttl=64 time=763 ms
 64 bytes from europe (10.0.1.15): icmp_seq=9 ttl=64 time=1000 ms
 64 bytes from europe (10.0.1.15): icmp_seq=10 ttl=64 time=0.438 ms
 64 bytes from europe (10.0.1.15): icmp_seq=11 ttl=64 time=1000 ms
 64 bytes from europe (10.0.1.15): icmp_seq=12 ttl=64 time=0.299 ms
 ^C
 --- europe ping statistics ---
 12 packets transmitted, 12 received, 0% packet loss, time 11085ms

those up to 1000 msec delays can be 'felt' via ssh too, if this problem 
triggers then the system is almost unusable via the network. Local 
latencies are perfect so it's an e1000 problem.

	Ingo
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ