| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1215739755-5495-4-git-send-email-mchan@broadcom.com>
Date: Thu, 10 Jul 2008 18:29:13 -0700
From: "Michael Chan" <mchan@...adcom.com>
To: davem@...emloft.net
cc: netdev@...r.kernel.org, "Michael Chan" <mchan@...adcom.com>
Subject: [PATCH net-next 4/6] bnx2: Allow flexible VLAN tag settings.
Negotiate with boot code and ASF firmware to see if it can
support keeping VLAN tags in the RX packets. If supported
by firmware, the VLAN tag will be kept in the RX packet
unless VLAN acceleration is registered.
Signed-off-by: Michael Chan <mchan@...adcom.com>
---
drivers/net/bnx2.c | 44 +++++++++++++++++++++++++++-----------------
drivers/net/bnx2.h | 6 ++++++
2 files changed, 33 insertions(+), 17 deletions(-)
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 4dfd439..2d0213e 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -4255,35 +4255,43 @@ nvram_write_end:
}
static void
-bnx2_init_remote_phy(struct bnx2 *bp)
+bnx2_init_fw_cap(struct bnx2 *bp)
{
- u32 val;
+ u32 val, sig = 0;
bp->phy_flags &= ~BNX2_PHY_FLAG_REMOTE_PHY_CAP;
- if (!(bp->phy_flags & BNX2_PHY_FLAG_SERDES))
- return;
+ bp->flags &= ~BNX2_FLAG_CAN_KEEP_VLAN;
+
+ if (!(bp->flags & BNX2_FLAG_ASF_ENABLE))
+ bp->flags |= BNX2_FLAG_CAN_KEEP_VLAN;
val = bnx2_shmem_rd(bp, BNX2_FW_CAP_MB);
if ((val & BNX2_FW_CAP_SIGNATURE_MASK) != BNX2_FW_CAP_SIGNATURE)
return;
- if (val & BNX2_FW_CAP_REMOTE_PHY_CAPABLE) {
+ if ((val & BNX2_FW_CAP_CAN_KEEP_VLAN) == BNX2_FW_CAP_CAN_KEEP_VLAN) {
+ bp->flags |= BNX2_FLAG_CAN_KEEP_VLAN;
+ sig |= BNX2_DRV_ACK_CAP_SIGNATURE | BNX2_FW_CAP_CAN_KEEP_VLAN;
+ }
+
+ if ((bp->phy_flags & BNX2_PHY_FLAG_SERDES) &&
+ (val & BNX2_FW_CAP_REMOTE_PHY_CAPABLE)) {
+ u32 link;
+
bp->phy_flags |= BNX2_PHY_FLAG_REMOTE_PHY_CAP;
- val = bnx2_shmem_rd(bp, BNX2_LINK_STATUS);
- if (val & BNX2_LINK_STATUS_SERDES_LINK)
+ link = bnx2_shmem_rd(bp, BNX2_LINK_STATUS);
+ if (link & BNX2_LINK_STATUS_SERDES_LINK)
bp->phy_port = PORT_FIBRE;
else
bp->phy_port = PORT_TP;
- if (netif_running(bp->dev)) {
- u32 sig;
-
- sig = BNX2_DRV_ACK_CAP_SIGNATURE |
- BNX2_FW_CAP_REMOTE_PHY_CAPABLE;
- bnx2_shmem_wr(bp, BNX2_DRV_ACK_CAP_MB, sig);
- }
+ sig |= BNX2_DRV_ACK_CAP_SIGNATURE |
+ BNX2_FW_CAP_REMOTE_PHY_CAPABLE;
}
+
+ if (netif_running(bp->dev) && sig)
+ bnx2_shmem_wr(bp, BNX2_DRV_ACK_CAP_MB, sig);
}
static void
@@ -4380,7 +4388,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
spin_lock_bh(&bp->phy_lock);
old_port = bp->phy_port;
- bnx2_init_remote_phy(bp);
+ bnx2_init_fw_cap(bp);
if ((bp->phy_flags & BNX2_PHY_FLAG_REMOTE_PHY_CAP) &&
old_port != bp->phy_port)
bnx2_set_default_remote_link(bp);
@@ -5879,6 +5887,8 @@ bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp)
bp->vlgrp = vlgrp;
bnx2_set_rx_mode(dev);
+ if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE, 0, 1);
bnx2_netif_start(bp);
}
@@ -7483,8 +7493,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G)
bp->phy_flags |= BNX2_PHY_FLAG_2_5G_CAPABLE;
}
- bnx2_init_remote_phy(bp);
-
} else if (CHIP_NUM(bp) == CHIP_NUM_5706 ||
CHIP_NUM(bp) == CHIP_NUM_5708)
bp->phy_flags |= BNX2_PHY_FLAG_CRC_FIX;
@@ -7493,6 +7501,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
CHIP_REV(bp) == CHIP_REV_Bx))
bp->phy_flags |= BNX2_PHY_FLAG_DIS_EARLY_DAC;
+ bnx2_init_fw_cap(bp);
+
if ((CHIP_ID(bp) == CHIP_ID_5708_A0) ||
(CHIP_ID(bp) == CHIP_ID_5708_B0) ||
(CHIP_ID(bp) == CHIP_ID_5708_B1)) {
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index efa0ca9..7b882fd 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6670,6 +6670,7 @@ struct bnx2 {
#define BNX2_FLAG_USING_MSI_OR_MSIX (BNX2_FLAG_USING_MSI | \
BNX2_FLAG_USING_MSIX)
#define BNX2_FLAG_JUMBO_BROKEN 0x00000800
+#define BNX2_FLAG_CAN_KEEP_VLAN 0x00001000
struct bnx2_napi bnx2_napi[BNX2_MAX_MSIX_VEC];
@@ -6951,6 +6952,7 @@ struct fw_info {
#define BNX2_DRV_MSG_CODE_DIAG 0x07000000
#define BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL 0x09000000
#define BNX2_DRV_MSG_CODE_UNLOAD_LNK_DN 0x0b000000
+#define BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE 0x0d000000
#define BNX2_DRV_MSG_CODE_CMD_SET_LINK 0x10000000
#define BNX2_DRV_MSG_DATA 0x00ff0000
@@ -7279,6 +7281,10 @@ struct fw_info {
#define BNX2_FW_CAP_SIGNATURE_MASK 0xffff0000
#define BNX2_FW_CAP_REMOTE_PHY_CAPABLE 0x00000001
#define BNX2_FW_CAP_REMOTE_PHY_PRESENT 0x00000002
+#define BNX2_FW_CAP_MFW_CAN_KEEP_VLAN 0x00000008
+#define BNX2_FW_CAP_BC_CAN_KEEP_VLAN 0x00000010
+#define BNX2_FW_CAP_CAN_KEEP_VLAN (BNX2_FW_CAP_BC_CAN_KEEP_VLAN | \
+ BNX2_FW_CAP_MFW_CAN_KEEP_VLAN)
#define BNX2_RPHY_SIGNATURE 0x36c
#define BNX2_RPHY_LOAD_SIGNATURE 0x5a5a5a5a
--
1.5.5.GIT
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists