| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080723104520.GA20672@elte.hu>
Date: Wed, 23 Jul 2008 12:45:20 +0200
From: Ingo Molnar <mingo@...e.hu>
To: Jeff Garzik <jeff@...zik.org>
Cc: Alan Cox <alan@...rguk.ukuu.org.uk>,
Atsushi Nemoto <anemo@....ocn.ne.jp>, jgarzik@...hat.com,
akpm@...ux-foundation.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org
Subject: Re: [build failure] hp-plus.c: (.text+0xd7c1a): undefined reference
to `ei_close'
* Jeff Garzik <jeff@...zik.org> wrote:
>>>>> drivers/built-in.o: In function `ne_probe1':
>>>>> ne.c:(.init.text+0x2464): undefined reference to `NS8390_init'
>>>>> drivers/built-in.o: In function `ne_block_output':
>>>>> ne.c:(.text.ne_block_output+0x1b0): undefined reference to `NS8390_init'
>>>> i just triggered a similar build failure, but in a different
>>>> ne2000-derived file:
>>> I'll take a look. Various odd things happened with the Makefile for
>>> this patch and the follow up fixes. If the followup didn't get
>>> applied then that might explain the breakage.
>>
>> ok. I also got:
>>
>> drivers/built-in.o: In function `hp_probe1':
>> hp.c:(.init.text+0xa280): undefined reference to `NS8390_init'
>>
>> so i suspect most of the 8390p.o library using ne2000 drivers are
>> affected?
>>
>> i think instead of a manual review i think this is better to fix all
>> the problems:
>>
>> cd drivers/net/; sed -i 's/NS8390_/NS8390p_/g' \
>> $(grep -l NS8390_ $(grep 8390p.o Makefile | cut -d' ' -f3 | \
>> sed 's/.o$/.c/g'))
>>
>> find the full tested patch below. It solves the build failures i
>> triggered so far.
>>
>> Ingo
>>
>> ------------->
>> commit 79f2b8594df44a4f3f11085df656883525b74abd
>> Author: Ingo Molnar <mingo@...e.hu>
>> Date: Tue Jul 22 09:19:31 2008 +0200
>>
>> net 8390p: fix interface usage
>> various drivers were using the wrong APIs:
>> drivers/built-in.o: In function `hp_probe1':
>> hp.c:(.init.text+0xa280): undefined reference to `NS8390_init'
>> fixed via:
>> cd drivers/net/; sed -i 's/NS8390_/NS8390p_/g' \
>> $(grep -l NS8390_ $(grep 8390p.o Makefile | cut -d' ' -f3 | \
>> sed 's/.o$/.c/g'))
>> Signed-off-by: Ingo Molnar <mingo@...e.hu>
>> ---
>> drivers/net/hp-plus.c | 2 +-
>> drivers/net/hp.c | 2 +-
>> drivers/net/ne.c | 2 +-
>> drivers/net/ne2.c | 2 +-
>> 4 files changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c
>> index c2c4f49..8239939 100644
>> --- a/drivers/net/hp-plus.c
>> +++ b/drivers/net/hp-plus.c
>> @@ -262,7 +262,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr)
>> }
>> outw(Perf_Page, ioaddr + HP_PAGING);
>> - NS8390_init(dev, 0);
>> + NS8390p_init(dev, 0);
>> /* Leave the 8390 and HP chip reset. */
>> outw(inw(ioaddr + HPP_OPTION) & ~EnableIRQ, ioaddr + HPP_OPTION);
>> diff --git a/drivers/net/hp.c b/drivers/net/hp.c
>> index 8281209..0a8c649 100644
>> --- a/drivers/net/hp.c
>> +++ b/drivers/net/hp.c
>> @@ -389,7 +389,7 @@ static void __init
>> hp_init_card(struct net_device *dev)
>> {
>> int irq = dev->irq;
>> - NS8390_init(dev, 0);
>> + NS8390p_init(dev, 0);
>> outb_p(irqmap[irq&0x0f] | HP_RUN,
>> dev->base_addr - NIC_OFFSET + HP_CONFIGURE);
>> return;
>> diff --git a/drivers/net/ne.c b/drivers/net/ne.c
>> index 3df231d..4a8a4b1 100644
>> --- a/drivers/net/ne.c
>> +++ b/drivers/net/ne.c
>> @@ -355,7 +355,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
>> }
>> /* Read the 16 bytes of station address PROM.
>> - We must first initialize registers, similar to NS8390_init(eifdev, 0).
>> + We must first initialize registers, similar to NS8390p_init(eifdev, 0).
>> We can't reliably read the SAPROM address without this.
>> (I learned the hard way!). */
>> {
>> diff --git a/drivers/net/ne2.c b/drivers/net/ne2.c
>> index 8f72563..332df75 100644
>> --- a/drivers/net/ne2.c
>> +++ b/drivers/net/ne2.c
>> @@ -404,7 +404,7 @@ static int __init ne2_probe1(struct net_device *dev, int slot)
>> /* Read the 16 bytes of station address PROM.
>> We must first initialize registers, similar to
>> - NS8390_init(eifdev, 0).
>> + NS8390p_init(eifdev, 0).
>> We can't reliably read the SAPROM address without this.
>> (I learned the hard way!). */
>
> applied
thanks Jeff. I think the fix below from Atsushi-san might still be
missing from upstream?
Ingo
-------------------->
commit 994cd3a79a431f5ce234478e951856357f4bc94c
Author: Atsushi Nemoto <anemo@....ocn.ne.jp>
Date: Mon Jul 21 23:35:12 2008 +0900
8390: Fix ne.c build
Since commit 055e5110ae0c0c1176a75b78d789294f2ff2f7af ("8390: Split
8390 support into a pausing and a non pausing driver core"), ne.c
cause this build failure:
drivers/built-in.o: In function `ne_probe1':
ne.c:(.init.text+0x2464): undefined reference to `NS8390_init'
drivers/built-in.o: In function `ne_block_output':
ne.c:(.text.ne_block_output+0x1b0): undefined reference to `NS8390_init'
Signed-off-by: Atsushi Nemoto <anemo@....ocn.ne.jp>
Cc: jgarzik@...hat.com
Cc: akpm@...ux-foundation.org
Cc: Alan Cox <alan@...rguk.ukuu.org.uk>
Signed-off-by: Ingo Molnar <mingo@...e.hu>
---
drivers/net/ne.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 2fec612..4a8a4b1 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -536,7 +536,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = eip_poll;
#endif
- NS8390_init(dev, 0);
+ NS8390p_init(dev, 0);
ret = register_netdev(dev);
if (ret)
@@ -794,7 +794,7 @@ retry:
if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
ne_reset_8390(dev);
- NS8390_init(dev,1);
+ NS8390p_init(dev,1);
break;
}
@@ -855,7 +855,7 @@ static int ne_drv_resume(struct platform_device *pdev)
if (netif_running(dev)) {
ne_reset_8390(dev);
- NS8390_init(dev, 1);
+ NS8390p_init(dev, 1);
netif_device_attach(dev);
}
return 0;
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists