| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4899B1D3.9060500@myri.com>
Date: Wed, 06 Aug 2008 16:14:43 +0200
From: Brice Goglin <brice@...i.com>
To: Jeff Garzik <jeff@...zik.org>
CC: netdev@...r.kernel.org
Subject: [PATCH 1/2] myri10ge: update firmware headers
Update myri10ge firmware headers.
Signed-off-by: Brice Goglin <brice@...i.com>
---
drivers/net/myri10ge/myri10ge_mcp.h | 52 ++++++++++++++++++++++---
drivers/net/myri10ge/myri10ge_mcp_gen_header.h | 2
2 files changed, 48 insertions(+), 6 deletions(-)
Index: linux-2.6/drivers/net/myri10ge/myri10ge_mcp.h
===================================================================
--- linux-2.6.orig/drivers/net/myri10ge/myri10ge_mcp.h 2008-05-19 18:13:31.000000000 +0200
+++ linux-2.6/drivers/net/myri10ge/myri10ge_mcp.h 2008-08-04 13:22:07.000000000 +0200
@@ -101,6 +101,8 @@
#define MXGEFW_ETH_SEND_3 0x2c0000
#define MXGEFW_ETH_RECV_SMALL 0x300000
#define MXGEFW_ETH_RECV_BIG 0x340000
+#define MXGEFW_ETH_SEND_GO 0x380000
+#define MXGEFW_ETH_SEND_STOP 0x3C0000
#define MXGEFW_ETH_SEND(n) (0x200000 + (((n) & 0x03) * 0x40000))
#define MXGEFW_ETH_SEND_OFFSET(n) (MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4)
@@ -120,6 +122,11 @@
* MXGEFW_CMD_RESET is issued */
MXGEFW_CMD_SET_INTRQ_DMA,
+ /* data0 = LSW of the host address
+ * data1 = MSW of the host address
+ * data2 = slice number if multiple slices are used
+ */
+
MXGEFW_CMD_SET_BIG_BUFFER_SIZE, /* in bytes, power of 2 */
MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, /* in bytes */
@@ -129,6 +136,8 @@
MXGEFW_CMD_GET_SEND_OFFSET,
MXGEFW_CMD_GET_SMALL_RX_OFFSET,
MXGEFW_CMD_GET_BIG_RX_OFFSET,
+ /* data0 = slice number if multiple slices are used */
+
MXGEFW_CMD_GET_IRQ_ACK_OFFSET,
MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
@@ -200,7 +209,12 @@
MXGEFW_CMD_SET_STATS_DMA_V2,
/* data0, data1 = bus addr,
* data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
- * adding new stuff to mcp_irq_data without changing the ABI */
+ * adding new stuff to mcp_irq_data without changing the ABI
+ *
+ * If multiple slices are used, data2 contains both the size of the
+ * structure (in the lower 16 bits) and the slice number
+ * (in the upper 16 bits).
+ */
MXGEFW_CMD_UNALIGNED_TEST,
/* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned
@@ -222,13 +236,18 @@
MXGEFW_CMD_GET_MAX_RSS_QUEUES,
MXGEFW_CMD_ENABLE_RSS_QUEUES,
/* data0 = number of slices n (0, 1, ..., n-1) to enable
- * data1 = interrupt mode.
- * 0=share one INTx/MSI, 1=use one MSI-X per queue.
+ * data1 = interrupt mode | use of multiple transmit queues.
+ * 0=share one INTx/MSI.
+ * 1=use one MSI-X per queue.
* If all queues share one interrupt, the driver must have set
* RSS_SHARED_INTERRUPT_DMA before enabling queues.
+ * 2=enable both receive and send queues.
+ * Without this bit set, only one send queue (slice 0's send queue)
+ * is enabled. The receive queues are always enabled.
*/
-#define MXGEFW_SLICE_INTR_MODE_SHARED 0
-#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 1
+#define MXGEFW_SLICE_INTR_MODE_SHARED 0x0
+#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 0x1
+#define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2
MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET,
MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA,
@@ -250,10 +269,13 @@
* 2: TCP_IPV4 (required by RSS)
* 3: IPV4 | TCP_IPV4 (required by RSS)
* 4: source port
+ * 5: source port + destination port
*/
#define MXGEFW_RSS_HASH_TYPE_IPV4 0x1
#define MXGEFW_RSS_HASH_TYPE_TCP_IPV4 0x2
#define MXGEFW_RSS_HASH_TYPE_SRC_PORT 0x4
+#define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5
+#define MXGEFW_RSS_HASH_TYPE_MAX 0x5
MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
/* Return data = the max. size of the entire headers of a IPv6 TSO packet.
@@ -329,6 +351,20 @@
MXGEFW_CMD_GET_DCA_OFFSET,
/* offset of dca control for WDMAs */
+
+ /* VMWare NetQueue commands */
+ MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE,
+ MXGEFW_CMD_NETQ_ADD_FILTER,
+ /* data0 = filter_id << 16 | queue << 8 | type */
+ /* data1 = MS4 of MAC Addr */
+ /* data2 = LS2_MAC << 16 | VLAN_tag */
+ MXGEFW_CMD_NETQ_DEL_FILTER,
+ /* data0 = filter_id */
+ MXGEFW_CMD_NETQ_QUERY1,
+ MXGEFW_CMD_NETQ_QUERY2,
+ MXGEFW_CMD_NETQ_QUERY3,
+ MXGEFW_CMD_NETQ_QUERY4,
+
};
enum myri10ge_mcp_cmd_status {
@@ -381,4 +417,10 @@
u8 valid;
};
+/* definitions for NETQ filter type */
+#define MXGEFW_NETQ_FILTERTYPE_NONE 0
+#define MXGEFW_NETQ_FILTERTYPE_MACADDR 1
+#define MXGEFW_NETQ_FILTERTYPE_VLAN 2
+#define MXGEFW_NETQ_FILTERTYPE_VLANMACADDR 3
+
#endif /* __MYRI10GE_MCP_H__ */
Index: linux-2.6/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
===================================================================
--- linux-2.6.orig/drivers/net/myri10ge/myri10ge_mcp_gen_header.h 2008-05-19 18:13:31.000000000 +0200
+++ linux-2.6/drivers/net/myri10ge/myri10ge_mcp_gen_header.h 2008-08-04 13:22:07.000000000 +0200
@@ -35,7 +35,7 @@
unsigned char mcp_index;
unsigned char disable_rabbit;
unsigned char unaligned_tlp;
- unsigned char pad1;
+ unsigned char pcie_link_algo;
unsigned counters_addr;
unsigned copy_block_info; /* for small mcps loaded with "lload -d" */
unsigned short handoff_id_major; /* must be equal */
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists