| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1218636952.547.95.camel@lb-tlvb-eliezer>
Date: Wed, 13 Aug 2008 17:15:52 +0300
From: "Eilon Greenstein" <eilong@...adcom.com>
To: "David Miller" <davem@...emloft.net>,
netdev <netdev@...r.kernel.org>
cc: "Yaniv Rosner" <yanivr@...adcom.com>
Subject: [PATCH 19/25] bnx2x: 8073 PHY changes
8073 PHY changes
The initial support we had for this PHY needs some serious changing. The
major change is that this PHY should be initialized only when the first
function is loaded and not for each function. The official SPI-ROM of
this PHY was released and it requires some changes in the initialization
code as well
Signed-off-by: Yaniv Rosner <yanivr@...adcom.com>
Signed-off-by: Eilon Greenstein <eilong@...adcom.com>
---
drivers/net/bnx2x_link.c | 576 +++++++++++++++++++++++++++++++++-------------
drivers/net/bnx2x_link.h | 3 +
drivers/net/bnx2x_main.c | 7 +
3 files changed, 428 insertions(+), 158 deletions(-)
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index c9cffa6..693efce 100755
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -2121,42 +2121,45 @@ static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
}
-static void bnx2x_bcm8073_external_rom_boot(struct link_params *params)
+static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port,
+ u8 ext_phy_addr)
{
- struct bnx2x *bp = params->bp;
- u8 port = params->port;
- u8 ext_phy_addr = ((params->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
- u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
- u16 fw_ver1, fw_ver2, val;
- /* Need to wait 100ms after reset */
- msleep(100);
- /* Boot port from external ROM */
+ u16 fw_ver1, fw_ver2;
+ /* Boot port from external ROM */
/* EDC grst */
- bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_GEN_CTRL,
0x0001);
/* ucode reboot and rst */
- bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_GEN_CTRL,
0x008c);
- bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_MISC_CTRL1, 0x0001);
/* Reset internal microprocessor */
- bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_GEN_CTRL,
MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
/* Release srst bit */
- bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_GEN_CTRL,
MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
@@ -2165,35 +2168,52 @@ static void bnx2x_bcm8073_external_rom_boot(struct link_params *params)
msleep(100);
/* Clear ser_boot_ctl bit */
- bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_MISC_CTRL1, 0x0000);
- bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_ROM_VER1, &fw_ver1);
- bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_ROM_VER2, &fw_ver2);
+ bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+ bnx2x_cl45_read(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_ROM_VER2, &fw_ver2);
DP(NETIF_MSG_LINK, "8073 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
- /* Only set bit 10 = 1 (Tx power down) */
- bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_TX_POWER_DOWN, &val);
+}
+static void bnx2x_bcm807x_force_10G(struct link_params *params)
+{
+ struct bnx2x *bp = params->bp;
+ u8 port = params->port;
+ u8 ext_phy_addr = ((params->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+ /* Force KR or KX */
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_TX_POWER_DOWN, (val | 1<<10));
-
- msleep(600);
- /* Release bit 10 (Release Tx power down) */
+ MDIO_PMA_REG_CTRL,
+ 0x2040);
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
-
+ MDIO_PMA_REG_10G_CTRL2,
+ 0x000b);
+ bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_BCM_CTRL,
+ 0x0000);
+ bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_CTRL,
+ 0x0000);
}
-
static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
{
struct bnx2x *bp = params->bp;
@@ -2259,32 +2279,51 @@ static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
}
-static void bnx2x_bcm807x_force_10G(struct link_params *params)
+
+static void bnx2x_8073_set_pause_cl37(struct link_params *params,
+ struct link_vars *vars)
{
+
struct bnx2x *bp = params->bp;
- u8 port = params->port;
+ u16 cl37_val;
u8 ext_phy_addr = ((params->ext_phy_config &
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
- /* Force KR or KX */
- bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_CTRL,
- 0x2040);
- bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_10G_CTRL2,
- 0x000b);
- bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_BCM_CTRL,
- 0x0000);
- bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_CL37_FC_LD, &cl37_val);
+
+ cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+
+ if ((vars->ieee_fc &
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) ==
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) {
+ cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
+ }
+ if ((vars->ieee_fc &
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
+ cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ }
+ if ((vars->ieee_fc &
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
+ cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ }
+ DP(NETIF_MSG_LINK,
+ "Ext phy AN advertize cl37 0x%x\n", cl37_val);
+
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
MDIO_AN_DEVAD,
- MDIO_AN_REG_CTRL,
- 0x0000);
+ MDIO_AN_REG_CL37_FC_LD, cl37_val);
+ msleep(500);
}
static void bnx2x_ext_phy_set_pause(struct link_params *params,
@@ -2542,54 +2581,43 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
rx_alarm_ctrl_val = 0x400;
lasi_ctrl_val = 0x0004;
} else {
- /* In 8073, port1 is directed through emac0 and
- * port0 is directed through emac1
- */
rx_alarm_ctrl_val = (1<<2);
- /*lasi_ctrl_val = 0x0005;*/
lasi_ctrl_val = 0x0004;
}
- /* Wait for soft reset to get cleared upto 1 sec */
- for (cnt = 0; cnt < 1000; cnt++) {
- bnx2x_cl45_read(bp, params->port,
- ext_phy_type,
- ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_CTRL,
- &ctrl);
- if (!(ctrl & (1<<15)))
- break;
- msleep(1);
- }
- DP(NETIF_MSG_LINK,
- "807x control reg 0x%x (after %d ms)\n",
- ctrl, cnt);
+ /* enable LASI */
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_RX_ALARM_CTRL,
+ rx_alarm_ctrl_val);
+
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_LASI_CTRL,
+ lasi_ctrl_val);
+
+ bnx2x_8073_set_pause_cl37(params, vars);
if (ext_phy_type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072){
bnx2x_bcm8072_external_rom_boot(params);
} else {
- bnx2x_bcm8073_external_rom_boot(params);
+
/* In case of 8073 with long xaui lines,
don't set the 8073 xaui low power*/
bnx2x_bcm8073_set_xaui_low_power_mode(params);
}
- /* enable LASI */
- bnx2x_cl45_write(bp, params->port,
- ext_phy_type,
- ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_RX_ALARM_CTRL,
- rx_alarm_ctrl_val);
-
- bnx2x_cl45_write(bp, params->port,
- ext_phy_type,
- ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_LASI_CTRL,
- lasi_ctrl_val);
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ 0xca13,
+ &tmp1);
bnx2x_cl45_read(bp, params->port,
ext_phy_type,
@@ -2603,12 +2631,21 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
/* If this is forced speed, set to KR or KX
* (all other are not supported)
*/
- if (!(params->req_line_speed == SPEED_AUTO_NEG)) {
- if (params->req_line_speed == SPEED_10000) {
- bnx2x_bcm807x_force_10G(params);
- DP(NETIF_MSG_LINK,
- "Forced speed 10G on 807X\n");
- break;
+ if (params->loopback_mode == LOOPBACK_EXT) {
+ bnx2x_bcm807x_force_10G(params);
+ DP(NETIF_MSG_LINK,
+ "Forced speed 10G on 807X\n");
+ break;
+ } else {
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type, ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_BCM_CTRL,
+ 0x0002);
+ }
+ if (params->req_line_speed != SPEED_AUTO_NEG) {
+ if (params->req_line_speed == SPEED_10000) {
+ val = (1<<7);
} else if (params->req_line_speed ==
SPEED_2500) {
val = (1<<5);
@@ -2623,11 +2660,14 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
val |= (1<<7);
+ /* Note that 2.5G works only when
+ used with 1G advertisment */
if (params->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+ (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
val |= (1<<5);
- DP(NETIF_MSG_LINK, "807x autoneg val = 0x%x\n", val);
- /*val = ((1<<5)|(1<<7));*/
+ DP(NETIF_MSG_LINK,
+ "807x autoneg val = 0x%x\n", val);
}
bnx2x_cl45_write(bp, params->port,
@@ -2638,20 +2678,19 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
if (ext_phy_type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
- /* Disable 2.5Ghz */
+
bnx2x_cl45_read(bp, params->port,
ext_phy_type,
ext_phy_addr,
MDIO_AN_DEVAD,
0x8329, &tmp1);
-/* SUPPORT_SPEED_CAPABILITY
- (Due to the nature of the link order, its not
- possible to enable 2.5G within the autoneg
- capabilities)
- if (params->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)
-*/
- if (params->req_line_speed == SPEED_2500) {
+
+ if (((params->speed_cap_mask &
+ PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) &&
+ (params->req_line_speed ==
+ SPEED_AUTO_NEG)) ||
+ (params->req_line_speed ==
+ SPEED_2500)) {
u16 phy_ver;
/* Allow 2.5G for A1 and above */
bnx2x_cl45_read(bp, params->port,
@@ -2659,49 +2698,53 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
ext_phy_addr,
MDIO_PMA_DEVAD,
0xc801, &phy_ver);
-
+ DP(NETIF_MSG_LINK, "Add 2.5G\n");
if (phy_ver > 0)
tmp1 |= 1;
else
tmp1 &= 0xfffe;
- }
- else
+ } else {
+ DP(NETIF_MSG_LINK, "Disable 2.5G\n");
tmp1 &= 0xfffe;
+ }
- bnx2x_cl45_write(bp, params->port,
- ext_phy_type,
- ext_phy_addr,
- MDIO_AN_DEVAD,
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
0x8329, tmp1);
}
- /* Add support for CL37 (passive mode) I */
- bnx2x_cl45_write(bp, params->port,
+
+ /* Add support for CL37 (passive mode) II */
+
+ bnx2x_cl45_read(bp, params->port,
ext_phy_type,
ext_phy_addr,
MDIO_AN_DEVAD,
- MDIO_AN_REG_CL37_FC_LD, 0x040c);
- /* Add support for CL37 (passive mode) II */
+ MDIO_AN_REG_CL37_FC_LD,
+ &tmp1);
+
bnx2x_cl45_write(bp, params->port,
ext_phy_type,
ext_phy_addr,
MDIO_AN_DEVAD,
- MDIO_AN_REG_CL37_FC_LD, 0x20);
+ MDIO_AN_REG_CL37_FC_LD, (tmp1 |
+ ((params->req_duplex == DUPLEX_FULL) ?
+ 0x20 : 0x40)));
+
/* Add support for CL37 (passive mode) III */
bnx2x_cl45_write(bp, params->port,
ext_phy_type,
ext_phy_addr,
MDIO_AN_DEVAD,
MDIO_AN_REG_CL37_AN, 0x1000);
- /* Restart autoneg */
- msleep(500);
if (ext_phy_type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-
- /* The SNR will improve about 2db by changing the
+ /* The SNR will improve about 2db by changing
BW and FEE main tap. Rest commands are executed
after link is up*/
- /* Change FFE main cursor to 5 in EDC register */
+ /*Change FFE main cursor to 5 in EDC register*/
if (bnx2x_8073_is_snr_needed(params))
bnx2x_cl45_write(bp, params->port,
ext_phy_type,
@@ -2710,25 +2753,28 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
MDIO_PMA_REG_EDC_FFE_MAIN,
0xFB0C);
- /* Enable FEC (Forware Error Correction)
- Request in the AN */
- bnx2x_cl45_read(bp, params->port,
- ext_phy_type,
- ext_phy_addr,
- MDIO_AN_DEVAD,
- MDIO_AN_REG_ADV2, &tmp1);
+ /* Enable FEC (Forware Error Correction)
+ Request in the AN */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_ADV2, &tmp1);
- tmp1 |= (1<<15);
+ tmp1 |= (1<<15);
+
+ bnx2x_cl45_write(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_ADV2, tmp1);
- bnx2x_cl45_write(bp, params->port,
- ext_phy_type,
- ext_phy_addr,
- MDIO_AN_DEVAD,
- MDIO_AN_REG_ADV2, tmp1);
}
bnx2x_ext_phy_set_pause(params, vars);
+ /* Restart autoneg */
+ msleep(500);
bnx2x_cl45_write(bp, params->port,
ext_phy_type,
ext_phy_addr,
@@ -2910,6 +2956,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
{
+ u16 link_status = 0;
+ u16 an1000_status = 0;
if (ext_phy_type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) {
bnx2x_cl45_read(bp, params->port,
@@ -2936,14 +2984,9 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_LASI_STATUS, &val1);
- bnx2x_cl45_read(bp, params->port,
- ext_phy_type,
- ext_phy_addr,
- MDIO_PMA_DEVAD,
- MDIO_PMA_REG_LASI_STATUS, &val2);
DP(NETIF_MSG_LINK,
- "8703 LASI status 0x%x->0x%x\n",
- val1, val2);
+ "8703 LASI status 0x%x\n",
+ val1);
}
/* clear the interrupt LASI status register */
@@ -2959,20 +3002,23 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
MDIO_PCS_REG_STATUS, &val1);
DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n",
val2, val1);
- /* Check the LASI */
+ /* Clear MSG-OUT */
bnx2x_cl45_read(bp, params->port,
ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_RX_ALARM, &val2);
+ 0xca13,
+ &val1);
+
+ /* Check the LASI */
bnx2x_cl45_read(bp, params->port,
ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
- MDIO_PMA_REG_RX_ALARM,
- &val1);
- DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n",
- val2, val1);
+ MDIO_PMA_REG_RX_ALARM, &val2);
+
+ DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2);
+
/* Check the link status */
bnx2x_cl45_read(bp, params->port,
ext_phy_type,
@@ -2995,29 +3041,29 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1);
if (ext_phy_type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
- u16 an1000_status = 0;
+
if (ext_phy_link_up &&
- (
- (params->req_line_speed != SPEED_10000)
- )) {
+ ((params->req_line_speed !=
+ SPEED_10000))) {
if (bnx2x_bcm8073_xaui_wa(params)
!= 0) {
ext_phy_link_up = 0;
break;
}
- bnx2x_cl45_read(bp, params->port,
+ }
+ bnx2x_cl45_read(bp, params->port,
ext_phy_type,
ext_phy_addr,
- MDIO_XS_DEVAD,
+ MDIO_AN_DEVAD,
0x8304,
&an1000_status);
- bnx2x_cl45_read(bp, params->port,
+ bnx2x_cl45_read(bp, params->port,
ext_phy_type,
ext_phy_addr,
- MDIO_XS_DEVAD,
+ MDIO_AN_DEVAD,
0x8304,
&an1000_status);
- }
+
/* Check the link status on 1.1.2 */
bnx2x_cl45_read(bp, params->port,
ext_phy_type,
@@ -3033,8 +3079,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
"an_link_status=0x%x\n",
val2, val1, an1000_status);
- ext_phy_link_up = (((val1 & 4) == 4) ||
- (an1000_status & (1<<1)));
+ ext_phy_link_up = (((val1 & 4) == 4) ||
+ (an1000_status & (1<<1)));
if (ext_phy_link_up &&
bnx2x_8073_is_snr_needed(params)) {
/* The SNR will improve about 2dbby
@@ -3058,8 +3104,74 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
MDIO_PMA_REG_CDR_BANDWIDTH,
0x0333);
+
+ }
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_PMA_DEVAD,
+ 0xc820,
+ &link_status);
+
+ /* Bits 0..2 --> speed detected,
+ bits 13..15--> link is down */
+ if ((link_status & (1<<2)) &&
+ (!(link_status & (1<<15)))) {
+ ext_phy_link_up = 1;
+ vars->line_speed = SPEED_10000;
+ DP(NETIF_MSG_LINK,
+ "port %x: External link"
+ " up in 10G\n", params->port);
+ } else if ((link_status & (1<<1)) &&
+ (!(link_status & (1<<14)))) {
+ ext_phy_link_up = 1;
+ vars->line_speed = SPEED_2500;
+ DP(NETIF_MSG_LINK,
+ "port %x: External link"
+ " up in 2.5G\n", params->port);
+ } else if ((link_status & (1<<0)) &&
+ (!(link_status & (1<<13)))) {
+ ext_phy_link_up = 1;
+ vars->line_speed = SPEED_1000;
+ DP(NETIF_MSG_LINK,
+ "port %x: External link"
+ " up in 1G\n", params->port);
+ } else {
+ ext_phy_link_up = 0;
+ DP(NETIF_MSG_LINK,
+ "port %x: External link"
+ " is down\n", params->port);
+ }
+ } else {
+ /* See if 1G link is up for the 8072 */
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ 0x8304,
+ &an1000_status);
+ bnx2x_cl45_read(bp, params->port,
+ ext_phy_type,
+ ext_phy_addr,
+ MDIO_AN_DEVAD,
+ 0x8304,
+ &an1000_status);
+ if (an1000_status & (1<<1)) {
+ ext_phy_link_up = 1;
+ vars->line_speed = SPEED_1000;
+ DP(NETIF_MSG_LINK,
+ "port %x: External link"
+ " up in 1G\n", params->port);
+ } else if (ext_phy_link_up) {
+ ext_phy_link_up = 1;
+ vars->line_speed = SPEED_10000;
+ DP(NETIF_MSG_LINK,
+ "port %x: External link"
+ " up in 10G\n", params->port);
}
}
+
+
break;
}
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
@@ -4203,6 +4315,154 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
return rc;
}
+static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+ u8 ext_phy_addr[PORT_MAX];
+ u16 val;
+ s8 port;
+
+ /* PART1 - Reset both phys */
+ for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+ /* Extract the ext phy address for the port */
+ u32 ext_phy_config = REG_RD(bp, shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].external_phy_config));
+
+ /* disable attentions */
+ bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+ (NIG_MASK_XGXS0_LINK_STATUS |
+ NIG_MASK_XGXS0_LINK10G |
+ NIG_MASK_SERDES0_LINK_STATUS |
+ NIG_MASK_MI_INT));
+
+ ext_phy_addr[port] =
+ ((ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+ /* Need to take the phy out of low power mode in order
+ to write to access its registers */
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
+
+ /* Reset the phy */
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr[port],
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_CTRL,
+ 1<<15);
+ }
+
+ /* Add delay of 150ms after reset */
+ msleep(150);
+
+ /* PART2 - Download firmware to both phys */
+ for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+ u16 fw_ver1;
+
+ bnx2x_bcm8073_external_rom_boot(bp, port,
+ ext_phy_addr[port]);
+
+ bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr[port],
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+ if (fw_ver1 == 0) {
+ DP(NETIF_MSG_LINK,
+ "bnx2x_8073_common_init_phy port %x "
+ "fw Download failed\n", port);
+ return -EINVAL;
+ }
+
+ /* Only set bit 10 = 1 (Tx power down) */
+ bnx2x_cl45_read(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr[port],
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_TX_POWER_DOWN, &val);
+
+ /* Phase1 of TX_POWER_DOWN reset */
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr[port],
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_TX_POWER_DOWN,
+ (val | 1<<10));
+ }
+
+ /* Toggle Transmitter: Power down and then up with 600ms
+ delay between */
+ msleep(600);
+
+ /* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */
+ for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+ /* Phase2 of POWER_DOWN_RESET*/
+ /* Release bit 10 (Release Tx power down) */
+ bnx2x_cl45_read(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr[port],
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_TX_POWER_DOWN, &val);
+
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr[port],
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
+ msleep(15);
+
+ /* Read modify write the SPI-ROM version select register */
+ bnx2x_cl45_read(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr[port],
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_EDC_FFE_MAIN, &val);
+ bnx2x_cl45_write(bp, port,
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+ ext_phy_addr[port],
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1<<12)));
+
+ /* set GPIO2 back to LOW */
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+ MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+ }
+ return 0;
+
+}
+
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+ u8 rc = 0;
+ u32 ext_phy_type;
+
+ DP(NETIF_MSG_LINK, "bnx2x_common_init_phy\n");
+
+ /* Read the ext_phy_type for arbitrary port(0) */
+ ext_phy_type = XGXS_EXT_PHY_TYPE(
+ REG_RD(bp, shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[0].external_phy_config)));
+
+ switch (ext_phy_type) {
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+ {
+ rc = bnx2x_8073_common_init_phy(bp, shmem_base);
+ break;
+ }
+ default:
+ DP(NETIF_MSG_LINK,
+ "bnx2x_common_init_phy: ext_phy 0x%x not required\n",
+ ext_phy_type);
+ break;
+ }
+
+ return rc;
+}
+
+
+
static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
{
u16 val, cnt;
diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h
index b222552..80c945c 100644
--- a/drivers/net/bnx2x_link.h
+++ b/drivers/net/bnx2x_link.h
@@ -55,6 +55,7 @@ struct link_params {
#define LOOPBACK_BMAC 2
#define LOOPBACK_XGXS_10 3
#define LOOPBACK_EXT_PHY 4
+#define LOOPBACK_EXT 5
u16 req_duplex;
u16 req_flow_ctrl;
@@ -166,5 +167,7 @@ u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
otherwise link is down*/
u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars);
+/* One-time initialization for external phy after power up */
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base);
#endif /* BNX2X_LINK_H */
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 85ea799..594b08a 100755
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -5377,6 +5377,13 @@ static int bnx2x_init_common(struct bnx2x *bp)
((u32 *)&tmp)[1]);
}
+ if (!BP_NOMCP(bp)) {
+ bnx2x_acquire_phy_lock(bp);
+ bnx2x_common_init_phy(bp, bp->common.shmem_base);
+ bnx2x_release_phy_lock(bp);
+ } else
+ BNX2X_ERR("Bootcode is missing - can not initialize link\n");
+
return 0;
}
--
1.5.3.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists