lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <200808151507.11580.rjw@sisk.pl>
Date:	Fri, 15 Aug 2008 15:07:10 +0200
From:	"Rafael J. Wysocki" <rjw@...k.pl>
To:	Stephen Hemminger <shemminger@...tta.com>
Cc:	netdev@...r.kernel.org, Andrew Morton <akpm@...ux-foundation.org>,
	Jeff Garzik <jeff@...zik.org>,
	Jesse Barnes <jbarnes@...tuousgeek.org>,
	LKML <linux-kernel@...r.kernel.org>,
	pm list <linux-pm@...ts.linux-foundation.org>,
	"Brandeburg, Jesse" <jesse.brandeburg@...el.com>,
	Stephen Hemminger <stephen.hemminger@...tta.com>
Subject: Re: [PATCH 2/3] Adapt the sky2 driver to the reworked PCI PM

On Friday, 15 of August 2008, Rafael J. Wysocki wrote:
> On Friday, 15 of August 2008, Stephen Hemminger wrote:
> > On Thu, 14 Aug 2008 23:38:17 +0200
> > "Rafael J. Wysocki" <rjw@...k.pl> wrote:
> > 
> > > Adapt the sky2 driver to the reworked PCI PM
> > > 
> > > * Use device_set_wakeup_enable() and friends as needed
> > > * Remove an open-coded reference to the standard PCI PM registers
> > > * Use pci_prepare_to_sleep() and pci_back_from_sleep() in the
> > >   ->suspend() and ->resume() callbacks
> > > * Use the observation that it is sufficient to call pci_enable_wake()
> > >   once, unless it fails
> > > 
> > > Tested on Asus M3A32-MVP (Yukon-2 EC Ultra rev 3).
> > > 
> > > Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
> > > ---
> > >  drivers/net/sky2.c |   34 ++++++++++------------------------
> > >  1 file changed, 10 insertions(+), 24 deletions(-)
> > > 
> > > Index: linux-2.6/drivers/net/sky2.c
> > > ===================================================================
> > > --- linux-2.6.orig/drivers/net/sky2.c
> > > +++ linux-2.6/drivers/net/sky2.c
> > > @@ -3035,7 +3035,8 @@ static int sky2_set_wol(struct net_devic
> > >  	struct sky2_port *sky2 = netdev_priv(dev);
> > >  	struct sky2_hw *hw = sky2->hw;
> > >  
> > > -	if (wol->wolopts & ~sky2_wol_supported(sky2->hw))
> > > +	if ((wol->wolopts & ~sky2_wol_supported(sky2->hw))
> > > +	    || !device_can_wakeup(&hw->pdev->dev))
> > >  		return -EOPNOTSUPP;
> > >  
> > 
> > There was a regression in earlier releases caused because some BIOS's
> > are wrong, and device can wakeup.
> 
> device_can_wakeup() returns 'true' if the device is capable of generating PME#
> from at least one low power state (this is determined on the basis of the
> contents of the device's PCI PM registers - please have a look at
> drivers/pci/pci_pm_init() for details) or if ACPI tells us it can wake up.

drivers/pci/pci.c:pci_pm_init(), sorry.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ