[  889.041302] usb usb1: usb resume
[  889.041302] ehci_hcd 0000:00:1d.7: resume root hub
[  889.090584] hub 1-0:1.0: hub_resume
[  889.090584] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
[  889.090584] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
[  889.090584] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
[  889.090584] hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
[  889.251821] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
[  889.311664] ehci_hcd 0000:00:1d.7: port 3 high speed
[  889.311678] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
[  889.371254] usb 1-3: new high speed USB device using ehci_hcd and address 4
[  889.429893] ehci_hcd 0000:00:1d.7: port 3 high speed
[  889.429908] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
[  889.525184] usb 1-3: default language 0x0409
[  889.561999] usb 1-3: uevent
[  889.561999] usb 1-3: usb_probe_device
[  889.561999] usb 1-3: configuration #1 chosen from 1 choice
[  889.561999] usb 1-3: adding 1-3:1.0 (config #1, interface 0)
[  889.561999] usb 1-3:1.0: uevent
[  889.561999] plusb 1-3:1.0: usb_probe_interface
[  889.561999] plusb 1-3:1.0: usb_probe_interface - got id
[  889.563640] usb0: register 'plusb' at usb-0000:00:1d.7-3, Prolific PL-2301/PL-2302/PL-25A1, de:42:b3:88:b9:d8
[  889.563794] drivers/usb/core/inode.c: creating file '004'
[  889.563866] usb 1-3: New USB device found, idVendor=050d, idProduct=258a
[  889.563871] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  889.563877] usb 1-3: Product: Belkin USB Easy Transfer Cable
[  889.563881] usb 1-3: Manufacturer: Belkin Corporation
[  895.753895] usb 1-3: ip timed out on ep0out len=0/0
[  895.753908] usb0: pl_reset --> -110
[  895.753910] 
[  895.753955] usb0: rxqlen 0 --> 10
[  895.753983] usb0: rxqlen 10 --> 20
[  895.754015] usb0: rxqlen 20 --> 30
[  895.754041] usb0: rxqlen 30 --> 40
[  895.754068] usb0: rxqlen 40 --> 50
[  895.754100] usb0: rxqlen 50 --> 60
[  905.850819] usb0: no IPv6 routers present
[  919.042362] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
[  919.042362] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
[  919.042362] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
[  919.197547] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
[  919.257960] ehci_hcd 0000:00:1d.7: port 1 high speed
[  919.257974] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[  919.317406] usb 1-1: new high speed USB device using ehci_hcd and address 5
[  919.378895] ehci_hcd 0000:00:1d.7: port 1 high speed
[  919.378909] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
[  919.487320] usb 1-1: default language 0x0409
[  919.519888] usb 1-1: uevent
[  919.519888] usb 1-1: usb_probe_device
[  919.519888] usb 1-1: configuration #1 chosen from 1 choice
[  919.519888] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[  919.519888] usb 1-1:1.0: uevent
[  919.519888] plusb 1-1:1.0: usb_probe_interface
[  919.519888] plusb 1-1:1.0: usb_probe_interface - got id
[  919.519888] usb1: register 'plusb' at usb-0000:00:1d.7-1, Prolific PL-2301/PL-2302/PL-25A1, de:42:b3:88:b9:d8
[  919.520324] drivers/usb/core/inode.c: creating file '005'
[  919.520577] usb 1-1: New USB device found, idVendor=050d, idProduct=258a
[  919.520583] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  919.520589] usb 1-1: Product: Belkin USB Easy Transfer Cable
[  919.520594] usb 1-1: Manufacturer: Belkin Corporation
[  985.101546] usb 1-1: ip timed out on ep0out len=0/0
[  985.101546] usb1: pl_reset --> -110
[  985.101546] 
[  985.101546] usb1: rxqlen 0 --> 10
[  985.101546] usb1: rxqlen 10 --> 20
[  985.101546] usb1: rxqlen 20 --> 30
[  985.101546] usb1: rxqlen 30 --> 40
[  985.101546] usb1: rxqlen 40 --> 50
[  985.101546] usb1: rxqlen 50 --> 60