lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <48B3A8D0.2040108@avtrex.com>
Date:	Mon, 25 Aug 2008 23:55:12 -0700
From:	David Daney <ddaney@...rex.com>
To:	e1000-devel@...ts.sourceforge.net, netdev@...r.kernel.org
Cc:	linux-mips <linux-mips@...ux-mips.org>
Subject: [PATCH] e100: Add missing dma sync for proper operation with non-coherent
 caches.

I am running the e100 driver on a MIPS 4KEc system (32 bit mips with
non-coherent DMA).  There was a problem where received packets would
get 'stuck' for several seconds at a time and then be released all at
once.

The cause was that if an interrupt were received when no RX packets
were available, the status for the receive buffer would be stuck in
the cache, so when the next interrupt arrived the old status value was
read (indicating no packets available) instead of the new value.

The fix is to call pci_dma_sync_single_for_device on the RX if the
packet is not available to invalidate the cache so that at the next
interrupt valid status is returned.

The driver currently calls pci_dma_sync_single_for_cpu before reading
the status, and this is indeed needed for cases like the R10000 CPU
where the cache can be polluted by speculative execution, but for most
machines it is a nop.

The patch was tested on 2.6.17-rc4 on a MIPS 4KEc.

Signed-off-by: David Daney <ddaney@...rex.com>
---
 drivers/net/e100.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 19d32a2..fb8d551 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1840,6 +1840,11 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 
 			if (readb(&nic->csr->scb.status) & rus_no_res)
 				nic->ru_running = RU_SUSPENDED;
+		/* We are done looking at the buffer.  Prepare it for
+		 * more DMA.  */
+		pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+					       sizeof(struct rfd),
+					       PCI_DMA_FROMDEVICE);
 		return -ENODATA;
 	}
 
-- 
1.5.5.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ