| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080901114849.GD7908@solarflare.com>
Date: Mon, 1 Sep 2008 12:48:50 +0100
From: Ben Hutchings <bhutchings@...arflare.com>
To: Jeff Garzik <jgarzik@...ox.com>
Cc: netdev@...r.kernel.org, linux-net-drivers@...arflare.com
Subject: [PATCH 36/52] sfc: Cleanup reset code
Move more code from efx_reset() into efx_reset_down() and efx_reset_up().
Stop propagating MAC/PHY setting failures from efx_reset_down() and
efx_reset_up() as these should not be fatal.
Signed-off-by: Ben Hutchings <bhutchings@...arflare.com>
---
drivers/net/sfc/efx.c | 98 ++++++++++++++++++++----------------------------
1 files changed, 41 insertions(+), 57 deletions(-)
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index f226dcf..f34dbf2 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1527,46 +1527,58 @@ static void efx_unregister_netdev(struct efx_nic *efx)
*
**************************************************************************/
-/* The final hardware and software finalisation before reset. */
-static int efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+/* Tears down the entire software state and most of the hardware state
+ * before reset. */
+static void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd)
{
int rc;
EFX_ASSERT_RESET_SERIALISED(efx);
+ /* The net_dev->get_stats handler is quite slow, and will fail
+ * if a fetch is pending over reset. Serialise against it. */
+ spin_lock(&efx->stats_lock);
+ spin_unlock(&efx->stats_lock);
+
+ efx_stop_all(efx);
+ mutex_lock(&efx->mac_lock);
+
rc = falcon_xmac_get_settings(efx, ecmd);
- if (rc) {
+ if (rc)
EFX_ERR(efx, "could not back up PHY settings\n");
- goto fail;
- }
efx_fini_channels(efx);
- return 0;
-
- fail:
- return rc;
}
-/* The first part of software initialisation after a hardware reset
- * This function does not handle serialisation with the kernel, it
- * assumes the caller has done this */
-static int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+/* This function will always ensure that the locks acquired in
+ * efx_reset_down() are released. A failure return code indicates
+ * that we were unable to reinitialise the hardware, and the
+ * driver should be disabled. If ok is false, then the rx and tx
+ * engines are not restarted, pending a RESET_DISABLE. */
+static int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd,
+ bool ok)
{
int rc;
- efx_init_channels(efx);
+ EFX_ASSERT_RESET_SERIALISED(efx);
- /* Restore MAC and PHY settings. */
- rc = falcon_xmac_set_settings(efx, ecmd);
+ rc = falcon_init_nic(efx);
if (rc) {
- EFX_ERR(efx, "could not restore PHY settings\n");
- goto fail;
+ EFX_ERR(efx, "failed to initialise NIC\n");
+ ok = false;
}
- return 0;
+ if (ok) {
+ efx_init_channels(efx);
- fail:
- efx_fini_channels(efx);
+ if (falcon_xmac_set_settings(efx, ecmd))
+ EFX_ERR(efx, "could not restore PHY settings\n");
+ }
+
+ mutex_unlock(&efx->mac_lock);
+
+ if (ok)
+ efx_start_all(efx);
return rc;
}
@@ -1598,22 +1610,12 @@ static int efx_reset(struct efx_nic *efx)
efx->state = STATE_RESETTING;
EFX_INFO(efx, "resetting (%d)\n", method);
- /* The net_dev->get_stats handler is quite slow, and will fail
- * if a fetch is pending over reset. Serialise against it. */
- spin_lock(&efx->stats_lock);
- spin_unlock(&efx->stats_lock);
-
- efx_stop_all(efx);
- mutex_lock(&efx->mac_lock);
-
- rc = efx_reset_down(efx, &ecmd);
- if (rc)
- goto fail1;
+ efx_reset_down(efx, &ecmd);
rc = falcon_reset_hw(efx, method);
if (rc) {
EFX_ERR(efx, "failed to reset hardware\n");
- goto fail2;
+ goto fail;
}
/* Allow resets to be rescheduled. */
@@ -1625,46 +1627,28 @@ static int efx_reset(struct efx_nic *efx)
* can respond to requests. */
pci_set_master(efx->pci_dev);
- /* Reinitialise device. This is appropriate in the RESET_TYPE_DISABLE
- * case so the driver can talk to external SRAM */
- rc = falcon_init_nic(efx);
- if (rc) {
- EFX_ERR(efx, "failed to initialise NIC\n");
- goto fail3;
- }
-
/* Leave device stopped if necessary */
if (method == RESET_TYPE_DISABLE) {
- /* Reinitialise the device anyway so the driver unload sequence
- * can talk to the external SRAM */
- falcon_init_nic(efx);
rc = -EIO;
- goto fail4;
+ goto fail;
}
- rc = efx_reset_up(efx, &ecmd);
+ rc = efx_reset_up(efx, &ecmd, true);
if (rc)
- goto fail5;
+ goto disable;
- mutex_unlock(&efx->mac_lock);
EFX_LOG(efx, "reset complete\n");
-
efx->state = STATE_RUNNING;
- efx_start_all(efx);
-
unlock_rtnl:
rtnl_unlock();
return 0;
- fail5:
- fail4:
- fail3:
- fail2:
- fail1:
+ fail:
+ efx_reset_up(efx, &ecmd, false);
+ disable:
EFX_ERR(efx, "has been disabled\n");
efx->state = STATE_DISABLED;
- mutex_unlock(&efx->mac_lock);
rtnl_unlock();
efx_unregister_netdev(efx);
efx_fini_port(efx);
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists