[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20080920002324.GA3939@betsy>
Date: Fri, 19 Sep 2008 20:23:27 -0400
From: Greg Fitzgerald <netzdamon@...il.com>
To: netdev@...r.kernel.org
Subject: sky2 hangs
Hope I am sending this to the right place. Have the sky2 network card.
Internet will die out randomly, re-probing the sky2 module usually solves
the problem. According to dmesg the receiver is hanging.
sky2 eth0: hung mac 0:81 fifo 3 (86:89)
sky2 eth0: receiver hang detected
sky2 eth0: disabling interface
sky2 eth0: enabling interface
sky2 eth0: Link is up at 10 Mbps, half duplex, flow control none
sky2 eth0: hung mac 0:11 fifo 194 (51:45)
sky2 eth0: receiver hang detected
This top half happens 3 or 4 times, then I'll start to get this extra
output in dmesg after that.
sky2 eth0: disabling interface
ACPI: PCI interrupt for device 0000:02:00.0 disabled
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xcdefc000 irq 19 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:17:31:9b:ca:89
sky2 eth0: enabling interface
sky2 eth0: Link is up at 10 Mbps, half duplex, flow control none
sky2 eth0: disabling interface
sky2 eth0: enabling interface
sky2 eth0: Link is up at 10 Mbps, half duplex, flow control none
Some where in between all this, it actually gets to the point where I
totally loose my connection. Sometimes it will come back up and I'm
perfectly fine.
If I can provide any other information please let me know.
Oh, been having this problem for some time now. Current version of the
my kernel is 2.6.26.5.
--Greg
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists