netdev - Mark IPW2100 as BROKEN: Fatal interrupt. Scheduling firmware restart.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20080921172316.GA6306@2ka.mipt.ru>
Date:	Sun, 21 Sep 2008 21:23:17 +0400
From:	Evgeniy Polyakov <johnpol@....mipt.ru>
To:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:	ipw2100-devel@...ts.sourceforge.net,
	linux-wireless@...r.kernel.org, yi.zhu@...el.com,
	reinette.chatre@...el.com, jgarzik@...ox.com,
	linville@...driver.com, davem@...emloft.net
Subject: Mark IPW2100 as BROKEN: Fatal interrupt. Scheduling firmware restart.

Hi.

Following bug exists in the ipw2100 driver/firmware for years and Intel
folks never responded to zillions bugzilla entries and forum notices in
the internet with some patch or firmware update (although did request
dmesg and debug info, and received them).

ipw2100: Fatal interrupt. Scheduling firmware restart.

I believe it is a firmware bug because after driver is unloaded and
loaded back again wireless adapter usually starts working (for small
amount of time though). My conspiracy feeling can suggest, that it may
be kind of a force to buy a new one, or trivial error in the firmware,
when it writes to the same place in the flash and essentially given cell
became dead or whatever else.

Intel folks, please fix this problem, I see no other way to force you to do
this than to mark ipw2100 driver as broken, since that is what it is.

Bug exists at least in .15 upto .24 kernels, just search above dmesg
line. I cought it with 2.6.24-19-386 ubuntu kernel, 1.3 firmware
version. lspci:

02:04.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
	Subsystem: Intel Corporation Samsung X10/P30 integrated WLAN
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (500ns min, 8500ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 90080000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-

dmesg is pretty usual.

Signed-off-by: Evgeniy Polyakov <johnpol@....mipt.ru>

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 9931b5a..c24fc6a 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -125,7 +125,7 @@ config PCMCIA_RAYCS

 config IPW2100
 	tristate "Intel PRO/Wireless 2100 Network Connection"
-	depends on PCI && WLAN_80211
+	depends on PCI && WLAN_80211 && BROKEN
 	select WIRELESS_EXT
 	select FW_LOADER
 	select IEEE80211

-- 
	Evgeniy Polyakov
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html