netdev - [patch 10/21] driver/net/skge.c: restart the interface when it's options or pauseparam is set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 22 Sep 2008 14:52:17 -0700
From:	akpm@...ux-foundation.org
To:	jeff@...zik.org
Cc:	netdev@...r.kernel.org, akpm@...ux-foundation.org,
	Xiaoming.Zhang@...ilience.com, shemminger@...tta.com,
	xiaoming.zhang@...ilience.com
Subject: [patch 10/21] driver/net/skge.c: restart the interface when it's options or pauseparam is set

From: "Xiaoming.Zhang" <Xiaoming.Zhang@...ilience.com>

We have an issue of the skge driver: The card won't work when it's options
are changed.  Here's the hardware info:

# lspci -v
05:04.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
        Subsystem: Marvell Technology Group Ltd. Marvell RDK-8001
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
        Memory at d042c000 (32-bit, non-prefetchable) [size=16K]
        I/O ports at d000 [size=256]
        [virtual] Expansion ROM at 20400000 [disabled] [size=128K]
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Vital Product Data

The happens in both Linux-2.6.26(skge version 1.23) and RHEL5.2(skge
version 1.6).

For example, at first it is set to "speed 1000 duplex full auto-neg on" and
it works, then run

       ethtool -s <ethx> autoneg off
or     ethtool -s <ethx> speed 100 duplex full autoneg off

Then it will stop working. After that if we restart the interface:

	ifconifg <ethx> down
	ifconfig <ethx> up

It will work again. And `ethtool -A' has the same issue.

So we think after setting the options, the interface should be restarted. 

Signed-off-by: Zhang Xiaoming <xiaoming.zhang@...ilience.com>
Cc: Stephen Hemminger <shemminger@...tta.com>
Cc: Jeff Garzik <jeff@...zik.org>
Signed-off-by: Andrew Morton <akpm@...ux-foundation.org>
---

 drivers/net/skge.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff -puN drivers/net/skge.c~driver-net-skgec-restart-the-interface-when-its-options-or-pauseparam-is-set drivers/net/skge.c
--- a/drivers/net/skge.c~driver-net-skgec-restart-the-interface-when-its-options-or-pauseparam-is-set
+++ a/drivers/net/skge.c
@@ -353,8 +353,10 @@ static int skge_set_settings(struct net_
 	skge->autoneg = ecmd->autoneg;
 	skge->advertising = ecmd->advertising;
 
-	if (netif_running(dev))
-		skge_phy_reset(skge);
+	if (netif_running(dev)) {
+		skge_down(dev);
+		skge_up(dev);
+	}
 
 	return (0);
 }
@@ -595,8 +597,10 @@ static int skge_set_pauseparam(struct ne
 			skge->flow_control = FLOW_MODE_NONE;
 	}
 
-	if (netif_running(dev))
-		skge_phy_reset(skge);
+	if (netif_running(dev)) {
+		skge_down(dev);
+		skge_up(dev);
+	}
 
 	return 0;
 }
_
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html