[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1222338250.8641.61.camel@achroite>
Date: Thu, 25 Sep 2008 11:24:10 +0100
From: Ben Hutchings <bhutchings@...arflare.com>
To: Ivan Vecera <ivecera@...hat.com>
Cc: Francois Romieu <romieu@...zoreil.com>,
Ilpo Järvinen <ilpo.jarvinen@...sinki.fi>,
Netdev <netdev@...r.kernel.org>,
Edward Hsu <edward_hsu@...ltek.com.tw>,
Stephen Hemminger <shemminger@...tta.com>
Subject: Re: [PATCH] r8169: read MAC address from EEPROM on init
On Thu, 2008-09-25 at 11:38 +0200, Ivan Vecera wrote:
> Francois Romieu wrote:
> > Ivan Vecera <ivecera@...hat.com> :
> > [...]
> >> OK :-), I hope the patch below is finally the right one.
> >
> > My approval ratings won't surge today.
> >
> > Is there a specific explanation for the 10 us delay ?
> >
> > Realtek's 8168 / 8169 / 8101 drivers all use a (wildly copy'pasted ?)
> > 10 ms delay. I would not mind a 10 ms sleep.
> 'pci_vpd_pci22_wait' uses 100us(10x10us delay) for reading, there is 1ms
> (100x10us delay) in my patch, because 100us max. delay was too little for
> Realtek.
If the maximum delay there is too short, it should be increased. As
I've said before, I picked a timeout that worked for me in the absence
of any time limit in the PCI specification. I thought Stephen Hemminger
had modified it to work for sky2 but it looks like that change was
blocked by quibbling about how best to poll.
Ben.
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists