0 buses 0 - 255 [ 0.149155] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.154859] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.156854] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.156854] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.156854] pci 0000:00:01.0: PME# disabled [ 0.156854] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.156854] pci 0000:00:06.0: PME# disabled [ 0.156854] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.156854] pci 0000:00:1c.0: PME# disabled [ 0.156854] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.156854] pci 0000:00:1c.2: PME# disabled [ 0.156854] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.156854] pci 0000:00:1c.3: PME# disabled [ 0.156854] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.156854] pci 0000:00:1c.4: PME# disabled [ 0.156854] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.156854] pci 0000:00:1c.5: PME# disabled [ 0.156854] PCI: 0000:00:1d.0 reg 20 io port: [1000, 101f] [ 0.156854] PCI: 0000:00:1d.1 reg 20 io port: [1020, 103f] [ 0.156854] PCI: 0000:00:1d.2 reg 20 io port: [1040, 105f] [ 0.156854] PCI: 0000:00:1d.3 reg 20 io port: [1060, 107f] [ 0.156854] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fdcf0000, fdcf03ff] [ 0.156854] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.156854] pci 0000:00:1d.7: PME# disabled [ 0.156854] pci 0000:00:1f.0: quirk: region 0900-097f claimed by ICH6 ACPI/GPIO/TCO [ 0.156854] pci 0000:00:1f.0: quirk: region 0800-083f claimed by ICH6 GPIO [ 0.156854] PCI: 0000:00:1f.2 reg 10 io port: [1080, 1087] [ 0.156854] PCI: 0000:00:1f.2 reg 14 io port: [1088, 108b] [ 0.156854] PCI: 0000:00:1f.2 reg 18 io port: [1090, 1097] [ 0.156854] PCI: 0000:00:1f.2 reg 1c io port: [1098, 109b] [ 0.156854] PCI: 0000:00:1f.2 reg 20 io port: [10a0, 10af] [ 0.156854] PCI: 0000:00:1f.2 reg 24 io port: [10b0, 10bf] [ 0.156854] PCI: 0000:00:1f.5 reg 10 io port: [10c0, 10c7] [ 0.156854] PCI: 0000:00:1f.5 reg 14 io port: [10c8, 10cb] [ 0.156854] PCI: 0000:00:1f.5 reg 18 io port: [10d0, 10d7] [ 0.156854] PCI: 0000:00:1f.5 reg 1c io port: [10d8, 10db] [ 0.156854] PCI: 0000:00:1f.5 reg 20 io port: [10e0, 10ef] [ 0.156854] PCI: 0000:00:1f.5 reg 24 io port: [10f0, 10ff] [ 0.156917] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.156921] pci 0000:02:00.0: PME# disabled [ 0.156949] PCI: bridge 0000:00:1c.0 32bit mmio: [fdf00000, fdffffff] [ 0.157011] PCI: 0000:03:04.0 reg 10 64bit mmio: [fdff0000, fdffffff] [ 0.157022] PCI: 0000:03:04.0 reg 18 64bit mmio: [fdfe0000, fdfeffff] [ 0.157059] pci 0000:03:04.0: PME# supported from D3hot D3cold [ 0.157063] pci 0000:03:04.0: PME# disabled [ 0.157113] PCI: 0000:03:04.1 reg 10 64bit mmio: [fdfd0000, fdfdffff] [ 0.157124] PCI: 0000:03:04.1 reg 18 64bit mmio: [fdfc0000, fdfcffff] [ 0.157161] pci 0000:03:04.1: PME# supported from D3hot D3cold [ 0.157164] pci 0000:03:04.1: PME# disabled [ 0.157214] PCI: bridge 0000:02:00.0 32bit mmio: [fdf00000, fdffffff] [ 0.157394] PCI: 0000:01:02.0 reg 10 32bit mmio: [d8000000, dfffffff] [ 0.157400] PCI: 0000:01:02.0 reg 14 io port: [3000, 30ff] [ 0.157406] PCI: 0000:01:02.0 reg 18 32bit mmio: [fdef0000, fdefffff] [ 0.160018] PCI: 0000:01:02.0 reg 30 32bit mmio: [0, 1ffff] [ 0.160032] pci 0000:01:02.0: supports D1 [ 0.160033] pci 0000:01:02.0: supports D2 [ 0.160061] PCI: 0000:01:04.0 reg 10 io port: [2800, 28ff] [ 0.160067] PCI: 0000:01:04.0 reg 14 32bit mmio: [fdee0000, fdee01ff] [ 0.160104] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold [ 0.160107] pci 0000:01:04.0: PME# disabled [ 0.160138] PCI: 0000:01:04.2 reg 10 io port: [3400, 34ff] [ 0.160144] PCI: 0000:01:04.2 reg 14 32bit mmio: [fded0000, fded07ff] [ 0.160151] PCI: 0000:01:04.2 reg 18 32bit mmio: [fdec0000, fdec1fff] [ 0.160158] PCI: 0000:01:04.2 reg 1c 32bit mmio: [fde00000, fde7ffff] [ 0.160175] PCI: 0000:01:04.2 reg 30 32bit mmio: [0, ffff] [ 0.160189] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold [ 0.160193] pci 0000:01:04.2: PME# disabled [ 0.160246] PCI: 0000:01:04.4 reg 20 io port: [3800, 381f] [ 0.160271] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold [ 0.160275] pci 0000:01:04.4: PME# disabled [ 0.160302] PCI: 0000:01:04.6 reg 10 32bit mmio: [fddf0000, fddf00ff] [ 0.160343] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold [ 0.160346] pci 0000:01:04.6: PME# disabled [ 0.160381] pci 0000:00:1e.0: transparent bridge [ 0.160384] PCI: bridge 0000:00:1e.0 io port: [2000, 3fff] [ 0.160387] PCI: bridge 0000:00:1e.0 32bit mmio: [fdd00000, fdefffff] [ 0.160391] PCI: bridge 0000:00:1e.0 64bit mmio pref: [d8000000, dfffffff] [ 0.160419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.160647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] [ 0.160748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHE._PRT] [ 0.160819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHE.BCME._PRT] [ 0.160903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE2._PRT] [ 0.161025] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE3._PRT] [ 0.161147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE4._PRT] [ 0.161268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE5._PRT] [ 0.161380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT] [ 0.161501] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG2._PRT] [ 0.164085] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) [ 0.164161] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11) [ 0.164235] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. [ 0.164310] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. [ 0.164385] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11) [ 0.164459] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) [ 0.164532] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) [ 0.164605] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) [ 0.164647] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.164647] pnp: PnP ACPI init [ 0.164647] ACPI: bus type pnp registered [ 0.164647] pnp 00:00: parse allocated resources [ 0.164647] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.164647] pnp 00:01: parse allocated resources [ 0.164647] pnp 00:01: add io 0x70-0x77 flags 0x1 [ 0.164647] pnp 00:01: add io 0x408-0x40f flags 0x1 [ 0.164647] pnp 00:01: add io 0x4d0-0x4d1 flags 0x1 [ 0.164647] pnp 00:01: add io 0x20-0x3f flags 0x1 [ 0.164647] pnp 00:01: add io 0xa0-0xbf flags 0x1 [ 0.164647] pnp 00:01: add io 0x90-0x9f flags 0x1 [ 0.164647] pnp 00:01: add io 0x50-0x53 flags 0x1 [ 0.164647] pnp 00:01: add io 0xf0-0xf0 flags 0x1 [ 0.164647] pnp 00:01: add io 0x700-0x71f flags 0x1 [ 0.164647] pnp 00:01: add io 0x800-0x83f flags 0x1 [ 0.164647] pnp 00:01: add io 0x900-0x97f flags 0x1 [ 0.164647] pnp 00:01: add io 0x10-0x1f flags 0x1 [ 0.164647] pnp 00:01: add io 0xc80-0xc83 flags 0x1 [ 0.164647] pnp 00:01: add io 0xca2-0xca5 flags 0x1 [ 0.164647] pnp 00:01: add io 0xcd4-0xcd7 flags 0x1 [ 0.164647] pnp 00:01: add io 0xf50-0xf58 flags 0x1 [ 0.164647] pnp 00:01: add io 0xf0-0xf0 flags 0x1 [ 0.164647] pnp 00:01: add io 0xca0-0xca1 flags 0x1 [ 0.164647] pnp 00:01: add io 0xca4-0xca5 flags 0x1 [ 0.164647] pnp 00:01: add mem 0xe0000000-0xefffffff flags 0x1 [ 0.164647] pnp 00:01: add io 0x2f8-0x2ff flags 0x1 [ 0.164647] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x182 [ 0.164647] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.164647] pnp 00:02: parse allocated resources [ 0.164647] pnp 00:02: add io 0xca2-0xca3 flags 0x1 [ 0.164647] pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active) [ 0.164647] pnp 00:03: parse allocated resources [ 0.164647] pnp 00:03: add mem 0xfed00000-0xfed003ff flags 0x0 [ 0.164647] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.164647] pnp 00:04: parse allocated resources [ 0.164647] pnp 00:04: add dma 7 flags 0x2 [ 0.164647] pnp 00:04: add io 0x0-0xf flags 0x1 [ 0.164647] pnp 00:04: add io 0x80-0x8f flags 0x1 [ 0.164647] pnp 00:04: add io 0xc0-0xdf flags 0x1 [ 0.164647] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.164647] pnp 00:05: parse allocated resources [ 0.164647] pnp 00:05: add io 0x61-0x61 flags 0x1 [ 0.164647] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.164647] pnp 00:06: parse allocated resources [ 0.164647] pnp 00:06: add io 0x60-0x60 flags 0x1 [ 0.164647] pnp 00:06: add io 0x64-0x64 flags 0x1 [ 0.164647] pnp 00:06: add irq 1 flags 0x1 [ 0.164647] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.164647] pnp 00:07: parse allocated resources [ 0.164647] pnp 00:07: add irq 12 flags 0x1 [ 0.164647] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.164647] pnp 00:08: parse allocated resources [ 0.164647] pnp 00:08: add io 0x2e-0x2f flags 0x1 [ 0.164647] pnp 00:08: add io 0x4e-0x4f flags 0x1 [ 0.164647] pnp 00:08: add io 0x620-0x65f flags 0x1 [ 0.164647] pnp 00:08: add io 0x680-0x69f flags 0x1 [ 0.164647] pnp 00:08: add io 0x600-0x61f flags 0x1 [ 0.164647] pnp 00:08: add io 0x660-0x67f flags 0x1 [ 0.164647] pnp 00:08: add io 0x300-0x30f flags 0x1 [ 0.164647] pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active) [ 0.164647] pnp 00:09: parse allocated resources [ 0.164647] pnp 00:09: add irq 4 flags 0x1 [ 0.164647] pnp 00:09: add io 0x3f8-0x3ff flags 0x1 [ 0.164647] pnp 00:09: parse resource options [ 0.164647] pnp 00:09: independent irq 4 flags 0x1 [ 0.164647] pnp 00:09: independent io min 0x3f8 max 0x3f8 align 0 size 8 flags 0x1 [ 0.164647] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.164647] pnp: PnP ACPI: found 10 devices [ 0.164647] ACPI: ACPI bus type pnp unregistered [ 0.164647] usbcore: registered new interface driver usbfs [ 0.164647] usbcore: registered new interface driver hub [ 0.164647] usbcore: registered new device driver usb [ 0.164647] PCI: Using ACPI for IRQ routing [ 0.184058] PCI-GART: No AMD northbridge found. [ 0.184063] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.184067] hpet0: 4 64-bit timers, 14318180 Hz [ 0.196060] pnp: the driver 'system' has been registered [ 0.196069] system 00:01: ioport range 0x408-0x40f has been reserved [ 0.196071] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.196074] system 00:01: ioport range 0x700-0x71f has been reserved [ 0.196076] system 00:01: ioport range 0x800-0x83f has been reserved [ 0.196079] system 00:01: ioport range 0x900-0x97f has been reserved [ 0.196081] system 00:01: ioport range 0xc80-0xc83 has been reserved [ 0.196084] system 00:01: ioport range 0xca2-0xca5 has been reserved [ 0.196087] system 00:01: ioport range 0xcd4-0xcd7 has been reserved [ 0.196090] system 00:01: ioport range 0xf50-0xf58 has been reserved [ 0.196092] system 00:01: ioport range 0xca0-0xca1 has been reserved [ 0.196094] system 00:01: ioport range 0xca4-0xca5 has been reserved [ 0.196097] system 00:01: ioport range 0x2f8-0x2ff has been reserved [ 0.196100] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.196102] system 00:01: driver attached [ 0.200956] pci 0000:00:01.0: PCI bridge, secondary bus 0000:15 [ 0.200957] pci 0000:00:01.0: IO window: disabled [ 0.200960] pci 0000:00:01.0: MEM window: disabled [ 0.200962] pci 0000:00:01.0: PREFETCH window: disabled [ 0.200965] pci 0000:00:06.0: PCI bridge, secondary bus 0000:12 [ 0.200966] pci 0000:00:06.0: IO window: disabled [ 0.200968] pci 0000:00:06.0: MEM window: disabled [ 0.200970] pci 0000:00:06.0: PREFETCH window: disabled [ 0.200973] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 [ 0.200975] pci 0000:02:00.0: IO window: disabled [ 0.200980] pci 0000:02:00.0: MEM window: 0xfdf00000-0xfdffffff [ 0.200983] pci 0000:02:00.0: PREFETCH window: disabled [ 0.200989] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.200991] pci 0000:00:1c.0: IO window: disabled [ 0.200994] pci 0000:00:1c.0: MEM window: 0xfdf00000-0xfdffffff [ 0.200997] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.201001] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.201003] pci 0000:00:1c.2: IO window: disabled [ 0.201006] pci 0000:00:1c.2: MEM window: disabled [ 0.201009] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.201013] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07 [ 0.201015] pci 0000:00:1c.3: IO window: disabled [ 0.201018] pci 0000:00:1c.3: MEM window: disabled [ 0.201021] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.201025] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0a [ 0.201026] pci 0000:00:1c.4: IO window: disabled [ 0.201030] pci 0000:00:1c.4: MEM window: disabled [ 0.201032] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.201037] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0d [ 0.201038] pci 0000:00:1c.5: IO window: disabled [ 0.201041] pci 0000:00:1c.5: MEM window: disabled [ 0.201044] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.201050] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.201053] pci 0000:00:1e.0: IO window: 0x2000-0x3fff [ 0.201056] pci 0000:00:1e.0: MEM window: 0xfdd00000-0xfdefffff [ 0.201059] pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff [ 0.201069] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.201072] pci 0000:00:01.0: setting latency timer to 64 [ 0.201075] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.201077] pci 0000:00:06.0: setting latency timer to 64 [ 0.201082] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.201085] pci 0000:00:1c.0: setting latency timer to 64 [ 0.201093] pci 0000:02:00.0: setting latency timer to 64 [ 0.201099] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.201102] pci 0000:00:1c.2: setting latency timer to 64 [ 0.201107] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.201110] pci 0000:00:1c.3: setting latency timer to 64 [ 0.201115] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.201118] pci 0000:00:1c.4: setting latency timer to 64 [ 0.201124] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.201127] pci 0000:00:1c.5: setting latency timer to 64 [ 0.201131] pci 0000:00:1e.0: setting latency timer to 64 [ 0.201134] bus: 00 index 0 io port: [0, ffff] [ 0.201135] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.201137] bus: 15 index 0 mmio: [0, 0] [ 0.201138] bus: 15 index 1 mmio: [0, 0] [ 0.201139] bus: 15 index 2 mmio: [0, 0] [ 0.201140] bus: 15 index 3 mmio: [0, 0] [ 0.201141] bus: 12 index 0 mmio: [0, 0] [ 0.201142] bus: 12 index 1 mmio: [0, 0] [ 0.201143] bus: 12 index 2 mmio: [0, 0] [ 0.201145] bus: 12 index 3 mmio: [0, 0] [ 0.201146] bus: 02 index 0 mmio: [0, 0] [ 0.201147] bus: 02 index 1 mmio: [fdf00000, fdffffff] [ 0.201148] bus: 02 index 2 mmio: [0, 0] [ 0.201149] bus: 02 index 3 mmio: [0, 0] [ 0.201151] bus: 03 index 0 mmio: [0, 0] [ 0.201152] bus: 03 index 1 mmio: [fdf00000, fdffffff] [ 0.201153] bus: 03 index 2 mmio: [0, 0] [ 0.201154] bus: 03 index 3 mmio: [0, 0] [ 0.201155] bus: 04 index 0 mmio: [0, 0] [ 0.201156] bus: 04 index 1 mmio: [0, 0] [ 0.201158] bus: 04 index 2 mmio: [0, 0] [ 0.201159] bus: 04 index 3 mmio: [0, 0] [ 0.201160] bus: 07 index 0 mmio: [0, 0] [ 0.201161] bus: 07 index 1 mmio: [0, 0] [ 0.201162] bus: 07 index 2 mmio: [0, 0] [ 0.201163] bus: 07 index 3 mmio: [0, 0] [ 0.201165] bus: 0a index 0 mmio: [0, 0] [ 0.201166] bus: 0a index 1 mmio: [0, 0] [ 0.201167] bus: 0a index 2 mmio: [0, 0] [ 0.201168] bus: 0a index 3 mmio: [0, 0] [ 0.201169] bus: 0d index 0 mmio: [0, 0] [ 0.201170] bus: 0d index 1 mmio: [0, 0] [ 0.201171] bus: 0d index 2 mmio: [0, 0] [ 0.201172] bus: 0d index 3 mmio: [0, 0] [ 0.201174] bus: 01 index 0 io port: [2000, 3fff] [ 0.201175] bus: 01 index 1 mmio: [fdd00000, fdefffff] [ 0.201176] bus: 01 index 2 mmio: [d8000000, dfffffff] [ 0.201178] bus: 01 index 3 io port: [0, ffff] [ 0.201179] bus: 01 index 4 mmio: [0, ffffffffffffffff] [ 0.201198] NET: Registered protocol family 2 [ 0.240410] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.241379] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.246302] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.247066] TCP: Hash tables configured (established 524288 bind 65536) [ 0.247068] TCP reno registered [ 0.256474] NET: Registered protocol family 1 [ 0.256563] checking if image is initramfs... it is [ 0.500799] Switched to high resolution mode on CPU 1 [ 0.504304] Switched to high resolution mode on CPU 0 [ 0.721470] Freeing initrd memory: 7619k freed [ 0.724587] audit: initializing netlink socket (disabled) [ 0.724603] type=2000 audit(1223744411.724:1): initialized [ 0.724872] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.724964] VFS: Disk quotas dquot_6.5.1 [ 0.724985] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.725017] msgmni has been set to 6045 [ 0.725099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.725102] io scheduler noop registered [ 0.725103] io scheduler anticipatory registered [ 0.725104] io scheduler deadline registered [ 0.725113] io scheduler cfq registered (default) [ 0.740285] pci 0000:01:02.0: Boot video device [ 0.741163] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.741183] pcieport-driver 0000:00:01.0: found MSI capability [ 0.741203] pci_express 0000:00:01.0:pcie00: allocate port service [ 0.741231] pci_express 0000:00:01.0:pcie03: allocate port service [ 0.741280] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 0.741299] pcieport-driver 0000:00:06.0: found MSI capability [ 0.741316] pci_express 0000:00:06.0:pcie00: allocate port service [ 0.741345] pci_express 0000:00:06.0:pcie03: allocate port service [ 0.741395] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.741418] pcieport-driver 0000:00:1c.0: found MSI capability [ 0.741442] pci_express 0000:00:1c.0:pcie00: allocate port service [ 0.741468] pci_express 0000:00:1c.0:pcie03: allocate port service [ 0.741529] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.741552] pcieport-driver 0000:00:1c.2: found MSI capability [ 0.741576] pci_express 0000:00:1c.2:pcie00: allocate port service [ 0.741600] pci_express 0000:00:1c.2:pcie03: allocate port service [ 0.741659] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.741682] pcieport-driver 0000:00:1c.3: found MSI capability [ 0.741706] pci_express 0000:00:1c.3:pcie00: allocate port service [ 0.741732] pci_express 0000:00:1c.3:pcie03: allocate port service [ 0.741792] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.741815] pcieport-driver 0000:00:1c.4: found MSI capability [ 0.741839] pci_express 0000:00:1c.4:pcie00: allocate port service [ 0.741866] pci_express 0000:00:1c.4:pcie03: allocate port service [ 0.741926] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.741949] pcieport-driver 0000:00:1c.5: found MSI capability [ 0.741973] pci_express 0000:00:1c.5:pcie00: allocate port service [ 0.741998] pci_express 0000:00:1c.5:pcie03: allocate port service [ 0.744075] hpet_resources: 0xfed00000 is busy [ 0.744123] Linux agpgart interface v0.103 [ 0.744125] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 0.744244] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.744320] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.744438] pnp: the driver 'serial' has been registered [ 0.744622] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.744652] serial 00:09: driver attached [ 0.745668] brd: module loaded [ 0.745714] input: Macintosh mouse button emulation as /class/input/input0 [ 0.745779] pnp: the driver 'i8042 kbd' has been registered [ 0.745787] i8042 kbd 00:06: driver attached [ 0.745807] pnp: the driver 'i8042 aux' has been registered [ 0.745818] i8042 aux 00:07: driver attached [ 0.745839] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 0.747301] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.747305] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.764333] mice: PS/2 mouse device common for all mice [ 0.764368] pnp: the driver 'rtc_cmos' has been registered [ 0.764402] cpuidle: using governor ladder [ 0.764404] cpuidle: using governor menu [ 0.764409] No iBFT detected. [ 0.764691] TCP cubic registered [ 0.764693] NET: Registered protocol family 17 [ 0.764782] registered taskstats version 1 [ 0.764899] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.764926] Freeing unused kernel memory: 480k freed [ 0.801321] input: AT Translated Set 2 keyboard as /class/input/input1 [ 0.822195] ACPI: SSDT BFE6C000, 02DA (r1 HP SSDT0 1 INTL 20030228) [ 0.822385] processor ACPI0007:00: registered as cooling_device0 [ 0.822533] ACPI: SSDT BFE6C300, 02DA (r1 HP SSDT1 1 INTL 20030228) [ 0.822711] processor ACPI0007:01: registered as cooling_device1 [ 0.823954] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.824013] ACPI: Thermal Zone [THM0] (8 C) [ 0.983224] USB Universal Host Controller Interface driver v3.0 [ 0.983271] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.983279] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.983281] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.983363] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.983398] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001000 [ 0.983469] usb usb1: configuration #1 chosen from 1 choice [ 0.983493] hub 1-0:1.0: USB hub found [ 0.983501] hub 1-0:1.0: 2 ports detected [ 1.029641] Uniform Multi-Platform E-IDE driver [ 1.084136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.084139] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.084142] usb usb1: Product: UHCI Host Controller [ 1.084143] usb usb1: Manufacturer: Linux 2.6.27 uhci_hcd [ 1.084145] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.084195] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.084201] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.084204] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.084241] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 1.084262] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001020 [ 1.084317] usb usb2: configuration #1 chosen from 1 choice [ 1.084336] hub 2-0:1.0: USB hub found [ 1.084340] hub 2-0:1.0: 2 ports detected [ 1.188097] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.188100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.188102] usb usb2: Product: UHCI Host Controller [ 1.188104] usb usb2: Manufacturer: Linux 2.6.27 uhci_hcd [ 1.188105] usb usb2: SerialNumber: 0000:00:1d.1 [ 1.188137] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 1.188142] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.188145] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.188187] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 1.188212] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001040 [ 1.188259] usb usb3: configuration #1 chosen from 1 choice [ 1.188278] hub 3-0:1.0: USB hub found [ 1.188281] hub 3-0:1.0: 2 ports detected [ 1.292126] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.292128] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.292130] usb usb3: Product: UHCI Host Controller [ 1.292132] usb usb3: Manufacturer: Linux 2.6.27 uhci_hcd [ 1.292134] usb usb3: SerialNumber: 0000:00:1d.2 [ 1.292164] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 1.292169] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.292172] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.292211] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 1.292232] uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001060 [ 1.292280] usb usb4: configuration #1 chosen from 1 choice [ 1.292298] hub 4-0:1.0: USB hub found [ 1.292302] hub 4-0:1.0: 2 ports detected [ 1.396094] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.396097] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.396099] usb usb4: Product: UHCI Host Controller [ 1.396101] usb usb4: Manufacturer: Linux 2.6.27 uhci_hcd [ 1.396102] usb usb4: SerialNumber: 0000:00:1d.3 [ 1.396199] uhci_hcd 0000:01:04.4: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 1.396205] uhci_hcd 0000:01:04.4: UHCI Host Controller [ 1.396218] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.396227] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.396230] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.396257] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5 [ 1.396268] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports [ 1.396921] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6 [ 1.397071] uhci_hcd 0000:01:04.4: irq 23, io base 0x00003800 [ 1.397255] usb usb5: configuration #1 chosen from 1 choice [ 1.397274] hub 5-0:1.0: USB hub found [ 1.397279] hub 5-0:1.0: 2 ports detected [ 1.400963] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.400968] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.400972] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfdcf0000 [ 1.416256] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.604119] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.604122] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.604124] usb usb5: Product: UHCI Host Controller [ 1.604126] usb usb5: Manufacturer: Linux 2.6.27 uhci_hcd [ 1.604127] usb usb5: SerialNumber: 0000:01:04.4 [ 1.604192] usb usb6: configuration #1 chosen from 1 choice [ 1.604217] hub 6-0:1.0: USB hub found [ 1.604228] hub 6-0:1.0: 8 ports detected [ 1.708136] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.708139] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.708141] usb usb6: Product: EHCI Host Controller [ 1.708143] usb usb6: Manufacturer: Linux 2.6.27 ehci_hcd [ 1.708145] usb usb6: SerialNumber: 0000:00:1d.7 [ 1.708201] tg3.c:v3.94 (August 14, 2008) [ 1.708210] tg3 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.720029] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 1.728990] eth0: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:21:5a:99:0a:28 [ 1.728993] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1] [ 1.728995] eth0: dma_rwctrl[76148000] dma_mask[40-bit] [ 1.729016] tg3 0000:03:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.748497] eth1: Tigon3 [partno(N/A) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:21:5a:99:0a:29 [ 1.748499] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 1.748501] eth1: dma_rwctrl[76148000] dma_mask[40-bit] [ 1.750285] No dock devices found. [ 1.756972] SCSI subsystem initialized [ 1.765016] libata version 3.00 loaded. [ 1.767495] ata_piix 0000:00:1f.2: version 2.12 [ 1.767508] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.767510] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.767544] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.767580] scsi0 : ata_piix [ 1.767634] scsi1 : ata_piix [ 1.767657] ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x1088 bmdma 0x10a0 irq 20 [ 1.767661] ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x1098 bmdma 0x10a8 irq 20 [ 1.867246] usb 5-1: configuration #1 chosen from 1 choice [ 1.876106] usb 5-1: New USB device found, idVendor=03f0, idProduct=1027 [ 1.876109] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.876110] usb 5-1: Product: Virtual Keyboard [ 1.876111] usb 5-1: Manufacturer: HP [ 1.988023] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 2.134655] usb 5-2: configuration #1 chosen from 1 choice [ 2.136827] hub 5-2:1.0: USB hub found [ 2.139095] hub 5-2:1.0: 7 ports detected [ 2.240086] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2.248196] ata1.00: ATA-7: GB0160CAABV, HPG1, max UDMA/100 [ 2.248198] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.264209] ata1.00: configured for UDMA/100 [ 2.277680] usb 5-2: New USB device found, idVendor=03f0, idProduct=1327 [ 2.277682] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.277684] usb 5-2: Product: Virtual Hub [ 2.277685] usb 5-2: Manufacturer: HP [ 2.278168] usbcore: registered new interface driver hiddev [ 2.282250] input: HP Virtual Keyboard as /class/input/input2 [ 2.304293] input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 [ 2.308201] input: HP Virtual Keyboard as /class/input/input3 [ 2.324303] input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 [ 2.324318] usbcore: registered new interface driver usbhid [ 2.324320] usbhid: v2.6:USB HID core driver [ 2.740100] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2.749476] ata2.00: ATA-6: WDC WD2500SD-01KCC0, 08.02D08, max UDMA/133 [ 2.749478] ata2.00: 488397168 sectors, multi 8: LBA48 [ 2.765484] ata2.00: configured for UDMA/133 [ 2.765516] isa bounce pool size: 16 pages [ 2.765585] scsi 0:0:0:0: Direct-Access ATA GB0160CAABV n/a PQ: 0 ANSI: 5 [ 2.765714] scsi 1:0:0:0: Direct-Access ATA WDC WD2500SD-01K 08.0 PQ: 0 ANSI: 5 [ 2.765774] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 2.765777] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 2.765809] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 2.766701] scsi2 : ata_piix [ 2.766877] scsi3 : ata_piix [ 2.766900] ata3: SATA max UDMA/133 cmd 0x10c0 ctl 0x10c8 bmdma 0x10e0 irq 20 [ 2.766903] ata4: SATA max UDMA/133 cmd 0x10d0 ctl 0x10d8 bmdma 0x10e8 irq 20 [ 3.520046] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.528211] ata3.00: ATAPI: TEAC DV-W28E-RW, G.B1, max UDMA/33 [ 3.528213] ata3.00: applying bridge limits [ 3.544227] ata3.00: configured for UDMA/33 [ 3.874583] ata4: SATA link down (SStatus 0 SControl 300) [ 3.906992] scsi 2:0:0:0: CD-ROM TEAC DV-W28E-RW G.B1 PQ: 0 ANSI: 5 [ 3.922341] Driver 'sd' needs updating - please use bus_type methods [ 3.922407] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 3.922418] sd 0:0:0:0: [sda] Write Protect is off [ 3.922420] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.922440] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.922486] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 3.922497] sd 0:0:0:0: [sda] Write Protect is off [ 3.922499] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.922518] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.922520] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 3.929236] sda1 sda2 [ 3.929329] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.929387] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 3.929405] sd 1:0:0:0: [sdb] Write Protect is off [ 3.929406] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.929426] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.929461] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 3.929472] sd 1:0:0:0: [sdb] Write Protect is off [ 3.929473] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.929492] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.929494] sdb: sdb1 sdb2 sdb3 [ 3.940091] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.052831] sr0: scsi3-mmc drive: 8x/8x writer cd/rw xa/form2 cdda tray [ 4.052835] Uniform CD-ROM driver Revision: 3.20 [ 4.052910] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 4.058158] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.058180] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 4.058198] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 4.757139] md: raid1 personality registered for level 1 [ 4.760356] md: md0 stopped. [ 4.765156] md: bind [ 4.765297] md: bind [ 4.770684] raid1: raid set md0 active with 2 out of 2 mirrors [ 4.770808] md: md1 stopped. [ 4.774609] md: bind [ 4.774753] md: bind [ 4.780238] raid1: raid set md1 active with 2 out of 2 mirrors [ 4.862045] device-mapper: uevent: version 1.0.3 [ 4.862325] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 4.927007] PM: Starting manual resume from disk [ 5.062550] kjournald starting. Commit interval 5 seconds [ 5.062558] EXT3-fs: mounted filesystem with ordered data mode. [ 6.156977] udevd version 125 started [ 6.533245] input: Power Button (FF) as /class/input/input4 [ 6.596310] ACPI: Power Button (FF) [PWRF] [ 6.757152] input: PC Speaker as /class/input/input5 [ 6.793361] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.794126] hpwdt 0000:01:04.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.794130] hpwdt: New timer passed in is 30 seconds. [ 6.794170] hp Watchdog Timer Driver: 1.00, timer margin: 30 seconds (nowayout=0), allow kernel dump: OFF (default = 0/OFF). [ 6.805913] hpilo 0000:01:04.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 6.808015] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.820094] ipmi message handler version 39.2 [ 6.833587] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 6.833646] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0960) [ 6.833661] iTCO_wdt: cannot register miscdev on minor=130 (err=-16) [ 6.835916] iTCO_wdt: No card detected [ 6.945803] IPMI System Interface driver. [ 6.945806] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 7.022115] Error: Driver 'pcspkr' is already registered, aborting... [ 7.043460] ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) [ 7.043466] IPMI kcs interface initialized [ 7.043476] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 7.043477] ipmi_si: duplicate interface [ 7.068047] ipmi_si 0000:01:04.6: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7.068050] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xfddf0000, slave address 0x0, irq 22 [ 7.152031] Using irq 22 [ 7.339797] ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) [ 7.339808] IPMI kcs interface initialized [ 8.180647] EXT3 FS on dm-0, internal journal [ 8.333940] loop: module loaded [ 9.410631] kjournald starting. Commit interval 5 seconds [ 9.421837] EXT3 FS on md0, internal journal [ 9.421841] EXT3-fs: mounted filesystem with ordered data mode. [ 9.462189] Adding 7811064k swap on /dev/mapper/scratch-swap. Priority:-1 extents:1 across:7811064k [ 9.929900] Bridge firewalling registered [ 9.929976] xenbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 9.936496] device eth0 entered promiscuous mode [ 12.311264] tg3: eth0: Link is up at 1000 Mbps, full duplex. [ 12.311266] tg3: eth0: Flow control is on for TX and on for RX. [ 12.312022] xenbr0: port 1(eth0) entering learning state [ 27.312014] xenbr0: topology change detected, propagating [ 27.312018] xenbr0: port 1(eth0) entering forwarding state [ 28.516464] NET: Registered protocol family 10 [ 28.516828] lo: Disabled Privacy Extensions [ 30.805811] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 38.844263] eth0: no IPv6 routers present