[<prev] [next>] [day] [month] [year] [list]
Message-ID: <Pine.LNX.4.64.0810182257270.30019@axis700.grange>
Date: Sat, 18 Oct 2008 23:02:34 +0200 (CEST)
From: Guennadi Liakhovetski <lg@...x.de>
To: netdev@...r.kernel.org
cc: jgarzik@...ox.com
Subject: [PATCH] [ARM] pcm037: add support for the on-board LAN9217 network
controller
smc911x now also supports LAN921{5,7,8} network controllers.
Signed-off-by: Guennadi Liakhovetski <lg@...x.de>
Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
---
This patch shall be merged through the ARM tree, however, as you see, it
also modifies drivers/net/Kconfig. The easiest for me would be if just I
could get an Acked-by for it. Otherwise, please tell me what you would
prefer - split it into two? Another thing - after a recent cs89x0
discussion, is it a good idea to add another ARM SoC type to the depends
list, or maybe just switch it to "ARM || SUPERH" or something totally
different?
arch/arm/mach-mx3/pcm037.c | 37 +++++++++++++++++++++++++++++++++++++
drivers/net/Kconfig | 2 +-
2 files changed, 38 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 11fda95..5660000 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -22,6 +22,9 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/memory.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -59,8 +62,37 @@ static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
+static struct resource smc911x_resources[] = {
+ [0] = {
+ .start = CS1_BASE_ADDR + 0x300,
+ .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smc911x_platdata smc911x_info = {
+ .flags = SMC911X_USE_32BIT,
+ .irq_flags = IRQF_SHARED | IRQF_TRIGGER_LOW,
+};
+
+static struct platform_device pcm037_eth = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc911x_resources),
+ .resource = smc911x_resources,
+ .dev = {
+ .platform_data = &smc911x_info,
+ },
+};
+
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
+ &pcm037_eth,
};
/*
@@ -81,6 +113,11 @@ static void __init mxc_board_init(void)
mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
mxc_register_device(&mxc_uart_device2, &uart_pdata);
+
+ /* SMSC9215 IRQ pin */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO));
+ if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth"))
+ gpio_direction_input(MX31_PIN_GPIO3_1);
}
/*
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1d8af33..86cf212 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -960,7 +960,7 @@ config SMC911X
tristate "SMSC LAN911[5678] support"
select CRC32
select MII
- depends on ARCH_PXA || SUPERH
+ depends on ARCH_PXA || ARCH_MX3 || SUPERH
help
This is a driver for SMSC's LAN911x series of Ethernet chipsets
including the new LAN9115, LAN9116, LAN9117, and LAN9118.
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists