| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1225164385.3977.11.camel@localhost>
Date: Mon, 27 Oct 2008 20:26:25 -0700
From: "Benjamin Li" <benli@...adcom.com>
To: "Eric Dumazet" <dada1@...mosbay.com>
cc: "willy@...ux.intel.com" <willy@...ux.intel.com>,
"jbarnes@...tuousgeek.org" <jbarnes@...tuousgeek.org>,
"linux kernel" <linux-kernel@...r.kernel.org>,
"Linux Netdev List" <netdev@...r.kernel.org>,
"Michael Chan" <mchan@...adcom.com>
Subject: Re: [PATCH] PCI: Limit VPD length for Broadcom 5708S
Hi Eric,
It looks like the same problem again: we are reading past a valid VPD
address.
After some initial debugging, it looks like dev->vpd is NULL when the
Broadcom 5706C/5706S/5708C/570S/5709 quirk is called. Because of this
dev->vpd->len is never set to the proper length to limit the VPD reads.
I will debug further to determine what has changed.
Thanks again for pointing out the problem.
-Ben
On Mon, 2008-10-27 at 15:27 -0700, Eric Dumazet wrote:
> Eric Dumazet a écrit :
> > While trying to upgrade kernel from 2.6.25 to 2.6.26 on a ProLiant
> > BL460c G1,
> > I faced this problem on integrated Broadcom 5708S NIC when trying to UP
> > them.
> >
> > bnx2: fw sync timeout, reset code = 1030003
> >
> > I noticed that commit 99cb233d60cbe644203f19938c729ea2bb004d70 (PCI:
> > Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev.A)
> > was probably a good candidate to solve the problem.
> >
> > Apparently, it added PCI quirks for a list of Broadcom NICs, but
> > quirk_brcm_570x_limit_vpd() ignores part of them.
> >
> > I found the following patch useful to restore correct operation on my
> > machine.
> >
> > Some information about this nic :
> >
> > 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708S
> > Gigabit Ethernet (rev 12)
> > Subsystem: Hewlett-Packard Company NC373i Integrated
> > Multifunction Gigabit Server Adapter
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> > ParErr+ Stepping- SERR+ FastB2B-
> > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> > <TAbort- <MAbort- >SERR- <PERR-
> > Latency: 64 (16000ns min), Cache Line Size 10
> > Interrupt: pin A routed to IRQ 222
> > Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=32M]
> > [virtual] Expansion ROM at d1200000 [disabled] [size=16K]
> > Capabilities: [40] PCI-X non-bridge device.
> > Command: DPERE- ERO- RBC=0 OST=4
> > Status: Bus=3 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-,
> > DC=simple, DMMRBC=0, DMOST=4, DMCRS=2, RSCEM-
> > Capabilities: [48] Power Management version 2
> > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> > PME(D0-,D1-,D2-,D3hot+,D3cold+)
> > Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> > Capabilities: [50] Vital Product Data
> > Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0
> > Enable+
> > Address: 00000000feeff00c Data: 4179
> >
> > after applying patch :
> >
> > # hexdump -C
> > "/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/0000:03:00.0/vpd"
> > 00000000 82 2f 00 48 50 20 4e 43 33 37 33 69 20 4d 75 6c |./.HP
> > NC373i Mul|
> > 00000010 74 69 66 75 6e 63 74 69 6f 6e 20 47 69 67 61 62 |tifunction
> > Gigab|
> > 00000020 69 74 20 53 65 72 76 65 72 20 41 64 61 70 74 65 |it Server
> > Adapte|
> > 00000030 72 00 90 4a 00 50 4e 03 4e 2f 41 45 43 03 4e 2f
> > |r..J.PN.N/AEC.N/|
> > 00000040 41 53 4e 0a 30 31 32 33 34 35 36 37 38 39 4d 4e
> > |ASN.0123456789MN|
> > 00000050 04 31 30 33 43 52 56 26 a2 00 00 00 00 00 00 00
> > |.103CRV&........|
> > 00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > |................|
> > 00000070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 78
> > |...............x|
> > 00000080
> >
> > Patch against current Linus tree, should also be sent for linux-2.6.26.2
> > inclusion.
> >
> > I have no idea if 5706S and 5709S also needs this truncation of VPD length
> >
> > Thank you
> >
> > [PATCH] PCI: Limit VPD length for Broadcom 5708S
> >
> > BCM5708S wont work correctly unless VPD length truncated to 128
> >
> > Signed-off-by: Eric Dumazet <dada1@...mosbay.com>
> >
> > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> > index 0fb3650..59667e5 100644
> > --- a/drivers/pci/quirks.c
> > +++ b/drivers/pci/quirks.c
> > @@ -1756,9 +1756,12 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA,
> > 0x324e, quirk_via_cx700_pci_parking_c
> > */
> > static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
> > {
> > - /* Only disable the VPD capability for 5706, 5708, and 5709 rev. A */
> > + /*
> > + * Only disable the VPD capability for 5706, 5708, 5708S and 5709
> > rev. A
> > + */
> > if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
> > (dev->device == PCI_DEVICE_ID_NX2_5708) ||
> > + (dev->device == PCI_DEVICE_ID_NX2_5708S) ||
> > ((dev->device == PCI_DEVICE_ID_NX2_5709) &&
> > (dev->revision & 0xf0) == 0x0)) {
> > if (dev->vpd)
> >
>
> Hi all
>
> Just tried linux-2.6.28-rc2 on same platform.
>
> Same problem again...
>
> Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.8.1 (Oct 7, 2008)
> bnx2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f6000000, IRQ 16, node addr 00:1e:0b:ec:d3:dc
> bnx2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 16, node addr 00:1e:0b:ec:d3:d2
> bnx2 0000:03:00.0: irq 45 for MSI/MSI-X
> bnx2: fw sync timeout, reset code = 1030003
> bnx2 0000:07:00.0: irq 45 for MSI/MSI-X
> bnx2: fw sync timeout, reset code = 1030003
> bnx2 0000:03:00.0: irq 45 for MSI/MSI-X
> bnx2: fw sync timeout, reset code = 1030006
>
>
> 2.6.27.4 is running fine on this machine
>
> Any ideas ?
>
> Thank you
>
> Eric
>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists