[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20081103205121.GA6005@havoc.gtf.org>
Date: Mon, 3 Nov 2008 15:51:22 -0500
From: Jeff Garzik <jeff@...zik.org>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] net driver fixes for 2.6.28-rc
Please pull from 'davem-fixes' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git davem-fixes
to receive the following updates:
drivers/net/Kconfig | 18 +++++++++++++++---
drivers/net/fs_enet/fs_enet-main.c | 6 ++++--
drivers/net/mv643xx_eth.c | 9 ++++++---
3 files changed, 25 insertions(+), 8 deletions(-)
Alexey Dobriyan (1):
fs_enet: fix polling
Jeff Kirsher (1):
net: kconfig cleanup
Lennert Buytenhek (1):
mv643xx_eth: fix SMI bus access timeouts
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f749b40..11f143f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2010,9 +2010,13 @@ config IGB_LRO
If in doubt, say N.
config IGB_DCA
- bool "Enable DCA"
+ bool "Direct Cache Access (DCA) Support"
default y
depends on IGB && DCA && !(IGB=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
source "drivers/net/ixp2000/Kconfig"
@@ -2437,9 +2441,13 @@ config IXGBE
will be called ixgbe.
config IXGBE_DCA
- bool
+ bool "Direct Cache Access (DCA) Support"
default y
depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
config IXGB
tristate "Intel(R) PRO/10GbE support"
@@ -2489,9 +2497,13 @@ config MYRI10GE
will be called myri10ge.
config MYRI10GE_DCA
- bool
+ bool "Direct Cache Access (DCA) Support"
default y
depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
config NETXEN_NIC
tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index cb51c1f..a6f49d0 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -1099,7 +1099,9 @@ static int __devinit fs_enet_probe(struct of_device *ofdev,
ndev->stop = fs_enet_close;
ndev->get_stats = fs_enet_get_stats;
ndev->set_multicast_list = fs_set_multicast_list;
-
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ ndev->poll_controller = fs_enet_netpoll;
+#endif
if (fpi->use_napi)
netif_napi_add(ndev, &fep->napi, fs_enet_rx_napi,
fpi->napi_weight);
@@ -1209,7 +1211,7 @@ static void __exit fs_cleanup(void)
static void fs_enet_netpoll(struct net_device *dev)
{
disable_irq(dev->irq);
- fs_enet_interrupt(dev->irq, dev, NULL);
+ fs_enet_interrupt(dev->irq, dev);
enable_irq(dev->irq);
}
#endif
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index a9c8c08..b9dcdbd 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1066,9 +1066,12 @@ static int smi_wait_ready(struct mv643xx_eth_shared_private *msp)
return 0;
}
- if (!wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp),
- msecs_to_jiffies(100)))
- return -ETIMEDOUT;
+ if (!smi_is_done(msp)) {
+ wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp),
+ msecs_to_jiffies(100));
+ if (!smi_is_done(msp))
+ return -ETIMEDOUT;
+ }
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists