netdev - [PATCH v3] bonding: send IPv6 neighbor advertisement on failover

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <490FB452.80802@hp.com>
Date:	Mon, 03 Nov 2008 21:32:50 -0500
From:	Brian Haley <brian.haley@...com>
To:	Jay Vosburgh <fubar@...ibm.com>
CC:	bonding-devel@...ts.sourceforge.net,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH v3] bonding: send IPv6 neighbor advertisement on failover

Jay,

I updated this patch to support the new "%pI6" format specifier.  Based 
on net-next-2.6 so it might not apply cleanly to your tree.

-Brian

---

This patch adds better IPv6 failover support for bonding devices,
especially when in active-backup mode and there are only IPv6 addresses
configured, as reported by Alex Sidorenko.

- Creates a new file, net/drivers/bonding/bond_ipv6.c, for the
   IPv6-specific routines.  Both regular bonds and VLANs over bonds
   are supported.

- Adds a new tunable, num_unsol_na, to limit the number of unsolicited
   IPv6 Neighbor Advertisements that are sent on a failover event.
   Default is 1.

- Creates two new IPv6 neighbor discovery functions:

   ndisc_build_skb()
   ndisc_send_skb()

   These were required to support VLANs since we have to be able to
   add the VLAN id to the skb since ndisc_send_na() and friends
   shouldn't be asked to do this.  These two routines are basically
   __ndisc_send() split into two pieces, in a slightly different order.

- Updates Documentation/networking/bonding.txt and bumps the rev of bond
   support to 3.4.0.

On failover, this new code will generate one packet:

- An unsolicited IPv6 Neighbor Advertisement, which helps the switch
   learn that the address has moved to the new slave.

Testing has shown that sending just the NA results in pretty good
behavior when in active-back mode, I saw no lost ping packets for example.

Signed-off-by: Brian Haley <brian.haley@...com>

View attachment "bonding-ipv6.patch" of type "text/x-diff" (19648 bytes)