[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20081125053128.GA32426@1wt.eu>
Date: Tue, 25 Nov 2008 06:31:28 +0100
From: Willy Tarreau <w@....eu>
To: Matt Carlson <mcarlson@...adcom.com>
Cc: Roger Heflin <rogerheflin@...il.com>,
Peter Zijlstra <peterz@...radead.org>,
LKML <linux-kernel@...r.kernel.org>,
netdev <netdev@...r.kernel.org>
Subject: Re: WARNING: at net/sched/sch_generic.c:219 dev_watchdog+0xfe/0x17e() with tg3 network
On Mon, Nov 24, 2008 at 05:52:23PM -0800, Matt Carlson wrote:
(...)
> > tg3: eth0: transmit timed out, resetting
> > tg3: DEBUG: MAC_TX_STATUS[0000000b] MAC_RX_STATUS[00000006]
> > tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000008]
> > tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
> > tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
> > tg3: tg3_stop_block timed out, ofs=4c00 enable_bit=2
> > tg3: eth0: Link is down.
> > tg3: eth0: Link is up at 100 Mbps, full duplex.
> > tg3: eth0: Flow control is on for TX and on for RX.
> >
> > The ease with which I reproduce it here clearly indicates that this is
> > related to the switch, probably just the fact that it is at 100 Mbps.
> > Unfortunately this evening I must go, but I still have one 100 Mbps
> > switch somewhere at home, I'll reproduce the same test ASAP in order
> > to bisect the issue.
> >
> > Regards,
> > Willy
>
> Does turning off flow control help at all?
I have not tested but I will. I hope to be able to trigger the problem
on other similar switches, because I'm only once a week connected to
the culprit...
Regards,
Willy
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists