| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <7d8268fd618c4ebd4e2252eb161634518b6e4cee.1227691434.git.inaky@linux.intel.com>
Date: Wed, 26 Nov 2008 14:40:43 -0800
From: Inaky Perez-Gonzalez <inaky@...ux.intel.com>
To: netdev@...r.kernel.org
Cc: wimax@...uxwimax.org
Subject: [PATCH 24/39] i2400m: various functions for device management
This is a collection of functions used to control the device (plus a
few helpers).
There are utilities for handling TLV buffers, hooks on the device's
reports to act on device changes of state [i2400m_report_hook()], on
acks to commands [i2400m_msg_ack_hook()], a helper for sending
commands to the device and blocking until a reply arrives
[i2400m_msg_to_dev()], a few high level commands for manipulating the
device state, powersving mode and configuration plus the routines to
setup the device once communication is established with it
[i2400m_dev_initialize()].
Signed-off-by: Inaky Perez-Gonzalez <inaky@...ux.intel.com>
---
drivers/net/wimax/i2400m/control.c | 1295 ++++++++++++++++++++++++++++++++++++
1 files changed, 1295 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wimax/i2400m/control.c
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
new file mode 100644
index 0000000..d4bcf3c
--- /dev/null
+++ b/drivers/net/wimax/i2400m/control.c
@@ -0,0 +1,1295 @@
+/*
+ * Intel Wireless WiMAX Connection 2400m
+ * Miscellaneous control functions for managing the device
+ *
+ *
+ * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * Intel Corporation <linux-wimax@...el.com>
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@...el.com>
+ * - Initial implementation
+ *
+ * This is a collection of functions used to control the device (plus
+ * a few helpers).
+ *
+ * There are utilities for handling TLV buffers, hooks on the device's
+ * reports to act on device changes of state [i2400m_report_hook()],
+ * on acks to commands [i2400m_msg_ack_hook()], a helper for sending
+ * commands to the device and blocking until a reply arrives
+ * [i2400m_msg_to_dev()], a few high level commands for manipulating
+ * the device state, powersving mode and configuration plus the
+ * routines to setup the device once communication is stablished with
+ * it [i2400m_dev_initialize()].
+ *
+ * ROADMAP
+ *
+ * i2400m_dev_initalize() Called by i2400m_dev_start()
+ * i2400m_set_init_config()
+ * i2400m_firmware_check()
+ * i2400m_cmd_get_state()
+ * i2400m_dev_shutdown() Called by i2400m_dev_stop()
+ * i2400m->bus_reset()
+ *
+ * i2400m_{cmd,get,set}_*()
+ * i2400m_msg_to_dev()
+ * i2400m_msg_check_status()
+ *
+ * i2400m_report_hook() Called on reception of an event
+ * i2400m_report_state_hook()
+ * i2400m_tlv_buffer_walk()
+ * i2400m_tlv_match()
+ * i2400m_report_tlv_system_state()
+ * i2400m_report_tlv_rf_switches_status()
+ * i2400m_report_tlv_media_status()
+ * i2400m_cmd_enter_powersave()
+ *
+ * i2400m_msg_ack_hook() Called on reception of a reply to a
+ * command, get or set
+ */
+
+#include <stdarg.h>
+#include "i2400m.h"
+#include <linux/kernel.h>
+#include <linux/wimax/i2400m.h>
+
+
+#define D_SUBMODULE control
+#include "debug-levels.h"
+
+
+/*
+ * Return if a TLV is of a give type and size
+ *
+ * @tlv_hdr: pointer to the TLV
+ * @tlv_type: type of the TLV we are looking for
+ * @tlv_size: expected size of the TLV we are looking for (if -1,
+ * don't check the size). This includes the header
+ * Returns: 0 if the TLV matches
+ * < 0 if it doesn't match at all
+ * > 0 total TLV + payload size, if the type matches, but not
+ * the size
+ */
+static
+ssize_t i2400m_tlv_match(const struct i2400m_tlv_hdr *tlv,
+ enum i2400m_tlv tlv_type, ssize_t tlv_size)
+{
+ if (le16_to_cpu(tlv->type) != tlv_type) /* Not our type? skip */
+ return -1;
+ if (tlv_size != -1
+ && le16_to_cpu(tlv->length) + sizeof(*tlv) != tlv_size) {
+ size_t size = le16_to_cpu(tlv->length) + sizeof(*tlv);
+ printk(KERN_WARNING "W: tlv type 0x%x mismatched because of "
+ "size (got %zu vs %zu expected)\n",
+ tlv_type, size, tlv_size);
+ return size;
+ }
+ return 0;
+}
+
+
+/*
+ * Given a buffer of TLVs, iterate over them
+ *
+ * @i2400m: device instance
+ * @tlv_buf: pointer to the beginning of the TLV buffer
+ * @buf_size: buffer size in bytes
+ * @tlv_pos: seek position; this is assumed to be a pointer returned
+ * by i2400m_tlv_buffer_walk() [and thus, validated]. The
+ * TLV returned will be the one following this one.
+ *
+ * Usage:
+ *
+ * tlv_itr = NULL;
+ * while (tlv_itr = i2400m_tlv_buffer_walk(i2400m, buf, size, tlv_itr)) {
+ * ...
+ * // Do stuff with tlv_itr, DON'T MODIFY IT
+ * ...
+ * }
+ */
+static
+const struct i2400m_tlv_hdr *i2400m_tlv_buffer_walk(
+ struct i2400m *i2400m,
+ const void *tlv_buf, size_t buf_size,
+ const struct i2400m_tlv_hdr *tlv_pos)
+{
+ struct device *dev = i2400m_dev(i2400m);
+ const struct i2400m_tlv_hdr *tlv_top = tlv_buf + buf_size;
+ size_t offset, length, avail_size;
+ unsigned type;
+
+ if (tlv_pos == NULL) /* Take the first one? */
+ tlv_pos = tlv_buf;
+ else /* Nope, the next one */
+ tlv_pos = (void *) tlv_pos
+ + le16_to_cpu(tlv_pos->length) + sizeof(*tlv_pos);
+ if (tlv_pos == tlv_top) { /* buffer done */
+ tlv_pos = NULL;
+ goto error_beyond_end;
+ }
+ if (tlv_pos > tlv_top) {
+ tlv_pos = NULL;
+ WARN_ON(1);
+ goto error_beyond_end;
+ }
+ offset = (void *) tlv_pos - (void *) tlv_buf;
+ avail_size = buf_size - offset;
+ if (avail_size < sizeof(*tlv_pos)) {
+ dev_err(dev, "HW BUG? tlv_buf %p [%zu bytes], tlv @%zu: "
+ "short header\n", tlv_buf, buf_size, offset);
+ goto error_short_header;
+ }
+ type = le16_to_cpu(tlv_pos->type);
+ length = le16_to_cpu(tlv_pos->length);
+ if (avail_size < sizeof(*tlv_pos) + length) {
+ dev_err(dev, "HW BUG? tlv_buf %p [%zu bytes], "
+ "tlv type 0x%04x @%zu: "
+ "short data (%zu bytes vs %zu needed)\n",
+ tlv_buf, buf_size, type, offset, avail_size,
+ sizeof(*tlv_pos) + length);
+ goto error_short_header;
+ }
+error_short_header:
+error_beyond_end:
+ return tlv_pos;
+}
+
+
+/*
+ * Find a TLV in a buffer of sequential TLVs
+ *
+ * @i2400m: device descriptor
+ * @tlv_hdr: pointer to the first TLV in the sequence
+ * @size: size of the buffer in bytes; all TLVs are assumed to fit
+ * fully in the buffer (otherwise we'll complain).
+ * @tlv_type: type of the TLV we are looking for
+ * @tlv_size: expected size of the TLV we are looking for (if -1,
+ * don't check the size). This includes the header
+ *
+ * Returns: NULL if the TLV is not found, otherwise a pointer to
+ * it. If the sizes don't match, an error is printed and NULL
+ * returned.
+ */
+static
+const struct i2400m_tlv_hdr *i2400m_tlv_find(
+ struct i2400m *i2400m,
+ const struct i2400m_tlv_hdr *tlv_hdr, size_t size,
+ enum i2400m_tlv tlv_type, ssize_t tlv_size)
+{
+ ssize_t match;
+ struct device *dev = i2400m_dev(i2400m);
+ const struct i2400m_tlv_hdr *tlv = NULL;
+ while ((tlv = i2400m_tlv_buffer_walk(i2400m, tlv_hdr, size, tlv))) {
+ match = i2400m_tlv_match(tlv, tlv_type, tlv_size);
+ if (match == 0) /* found it :) */
+ break;
+ if (match > 0)
+ dev_warn(dev, "TLV type 0x%04x found with size "
+ "mismatch (%zu vs %zu needed)\n",
+ tlv_type, match, tlv_size);
+ }
+ return tlv;
+}
+
+
+static const struct
+{
+ char *msg;
+ int errno;
+} ms_to_errno[I2400M_MS_MAX] = {
+ [I2400M_MS_DONE_OK] = { "", 0 },
+ [I2400M_MS_DONE_IN_PROGRESS] = { "", 0 },
+ [I2400M_MS_INVALID_OP] = { "invalid opcode", -ENOSYS },
+ [I2400M_MS_BAD_STATE] = { "invalid state", -EILSEQ },
+ [I2400M_MS_ILLEGAL_VALUE] = { "illegal value", -EINVAL },
+ [I2400M_MS_MISSING_PARAMS] = { "missing parameters", -ENOMSG },
+ [I2400M_MS_VERSION_ERROR] = { "bad version", -EIO },
+ [I2400M_MS_ACCESSIBILITY_ERROR] = { "accesibility error", -EIO },
+ [I2400M_MS_BUSY] = { "busy", -EBUSY },
+ [I2400M_MS_CORRUPTED_TLV] = { "corrupted TLV", -EILSEQ },
+ [I2400M_MS_UNINITIALIZED] = { "not unitialized", -EILSEQ },
+ [I2400M_MS_UNKNOWN_ERROR] = { "unknown error", -EIO },
+ [I2400M_MS_PRODUCTION_ERROR] = { "production error", -EIO },
+ [I2400M_MS_NO_RF] = { "no RF", -EIO },
+ [I2400M_MS_NOT_READY_FOR_POWERSAVE] =
+ { "not ready for powersave", -EACCES },
+ [I2400M_MS_THERMAL_CRITICAL] = { "thermal critical", -EL3HLT },
+};
+
+
+/*
+ * i2400m_msg_check_status - translate a message's status code
+ *
+ * @i2400m: device descriptor
+ * @l3l4_hdr: message header
+ * @strbuf: buffer to place a formatted error message (unless NULL).
+ * @strbuf_size: max amount of available space; larger messages will
+ * be truncated.
+ *
+ * Returns: errno code corresponding to the status code in @l3l4_hdr
+ * and a message in @strbuf describing the error.
+ */
+int i2400m_msg_check_status(const struct i2400m_l3l4_hdr *l3l4_hdr,
+ char *strbuf, size_t strbuf_size)
+{
+ int result;
+ enum i2400m_ms status = le16_to_cpu(l3l4_hdr->status);
+ const char *str;
+
+ if (status == 0)
+ return 0;
+ if (status > ARRAY_SIZE(ms_to_errno)) {
+ str = "unknown status code";
+ result = -EBADR;
+ } else {
+ str = ms_to_errno[status].msg;
+ result = ms_to_errno[status].errno;
+ }
+ if (strbuf)
+ snprintf(strbuf, strbuf_size, "%s (%d)", str, status);
+ return result;
+}
+
+
+/*
+ * Act on a TLV System State reported by the device
+ *
+ * @i2400m: device descriptor
+ * @ss: validated System State TLV
+ */
+static
+void i2400m_report_tlv_system_state(struct i2400m *i2400m,
+ const struct i2400m_tlv_system_state *ss)
+{
+ struct device *dev = i2400m_dev(i2400m);
+ struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
+ enum i2400m_system_state i2400m_state = le32_to_cpu(ss->state);
+
+ d_fnstart(3, dev, "(i2400m %p ss %p [%u])\n", i2400m, ss, i2400m_state);
+
+ if (unlikely(i2400m->ready == 0)) /* act if up */
+ goto out;
+ if (i2400m->state != i2400m_state) {
+ i2400m->state = i2400m_state;
+ wake_up_all(&i2400m->state_wq);
+ }
+ switch (i2400m_state) {
+ case I2400M_SS_UNINITIALIZED:
+ case I2400M_SS_INIT:
+ case I2400M_SS_CONFIG:
+ case I2400M_SS_PRODUCTION:
+ wimax_state_change(wimax_dev, WIMAX_ST_UNINITIALIZED);
+ break;
+
+ case I2400M_SS_RF_OFF:
+ case I2400M_SS_RF_SHUTDOWN:
+ wimax_state_change(wimax_dev, WIMAX_ST_RADIO_OFF);
+ break;
+
+ case I2400M_SS_READY:
+ case I2400M_SS_STANDBY:
+ case I2400M_SS_SLEEPACTIVE:
+ wimax_state_change(wimax_dev, WIMAX_ST_READY);
+ break;
+
+ case I2400M_SS_CONNECTING:
+ case I2400M_SS_WIMAX_CONNECTED:
+ wimax_state_change(wimax_dev, WIMAX_ST_READY);
+ break;
+
+ case I2400M_SS_SCAN:
+ case I2400M_SS_OUT_OF_ZONE:
+ wimax_state_change(wimax_dev, WIMAX_ST_SCANNING);
+ break;
+
+ case I2400M_SS_IDLE:
+ d_printf(1, dev, "entering BS-negotiated idle mode\n");
+ case I2400M_SS_DISCONNECTING:
+ case I2400M_SS_DATA_PATH_CONNECTED:
+ wimax_state_change(wimax_dev, WIMAX_ST_CONNECTED);
+ break;
+
+ default:
+ /* Huh? just in case, shut it down */
+ dev_err(dev, "HW BUG? unknown state %u: shutting down\n",
+ i2400m_state);
+ i2400m->bus_reset(i2400m, I2400M_RT_WARM);
+ break;
+ };
+out:
+ d_fnend(3, dev, "(i2400m %p ss %p [%u]) = void\n",
+ i2400m, ss, i2400m_state);
+}
+
+
+/*
+ * Parse and act on a TLV Media Status sent by the device
+ *
+ * @i2400m: device descriptor
+ * @ms: validated Media Status TLV
+ *
+ * This will set the carrier up on down based on the device's link
+ * report. This is done asides of what the WiMAX stack does based on
+ * the device's state as sometimes we need to do a link-renew (the BS
+ * wants us to renew a DHCP lease, for example).
+ *
+ * In fact, doc says that everytime we get a link-up, we should do a
+ * DHCP negotiation...
+ */
+static
+void i2400m_report_tlv_media_status(struct i2400m *i2400m,
+ const struct i2400m_tlv_media_status *ms)
+{
+ struct device *dev = i2400m_dev(i2400m);
+ struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
+ struct net_device *net_dev = wimax_dev->net_dev;
+ enum i2400m_media_status status = le32_to_cpu(ms->media_status);
+
+ d_fnstart(3, dev, "(i2400m %p ms %p [%u])\n", i2400m, ms, status);
+
+ if (unlikely(i2400m->ready == 0)) /* act if up */
+ goto out;
+ switch (status) {
+ case I2400M_MEDIA_STATUS_LINK_UP:
+ netif_carrier_on(net_dev);
+ break;
+ case I2400M_MEDIA_STATUS_LINK_DOWN:
+ netif_carrier_off(net_dev);
+ break;
+ /*
+ * This is the network telling us we need to retrain the DHCP
+ * lease -- so far, we are trusting the WiMAX Network Service
+ * in user space to pick this up and poke the DHCP client.
+ */
+ case I2400M_MEDIA_STATUS_LINK_RENEW:
+ netif_carrier_on(net_dev);
+ break;
+ default:
+ dev_err(dev, "HW BUG? unknown media status %u\n",
+ status);
+ };
+out:
+ d_fnend(3, dev, "(i2400m %p ms %p [%u]) = void\n",
+ i2400m, ms, status);
+}
+
+
+/*
+ * Parse a 'state report' and extract carrier on/off information
+ *
+ * @i2400m: device descriptor
+ * @l3l4_hdr: pointer to message; it has been already validated for
+ * consistent size.
+ * @size: size of the message (header + payload). The header length
+ * declaration is assumed to be congruent with @size (as in
+ * sizeof(*l3l4_hdr) + l3l4_hdr->length == size)
+ *
+ * Extract from the report state the system state TLV and infer from
+ * there if we have a carrier or not. Update our local state and tell
+ * netdev.
+ *
+ * When setting the carrier, it's fine to set OFF twice (for example),
+ * as netif_carrier_off() will not generate two OFF events (just on
+ * the transitions).
+ */
+static
+void i2400m_report_state_hook(struct i2400m *i2400m,
+ const struct i2400m_l3l4_hdr *l3l4_hdr,
+ size_t size, const char *tag)
+{
+ struct device *dev = i2400m_dev(i2400m);
+ const struct i2400m_tlv_hdr *tlv;
+ const struct i2400m_tlv_system_state *ss;
+ const struct i2400m_tlv_rf_switches_status *rfss;
+ const struct i2400m_tlv_media_status *ms;
+ size_t tlv_size = le16_to_cpu(l3l4_hdr->length);
+
+ d_fnstart(4, dev, "(i2400m %p, l3l4_hdr %p, size %zu, %s)\n",
+ i2400m, l3l4_hdr, size, tag);
+ tlv = NULL;
+
+ while ((tlv = i2400m_tlv_buffer_walk(i2400m, &l3l4_hdr->pl,
+ tlv_size, tlv))) {
+ if (0 == i2400m_tlv_match(tlv, I2400M_TLV_SYSTEM_STATE,
+ sizeof(*ss))) {
+ ss = container_of(tlv, typeof(*ss), hdr);
+ d_printf(2, dev, "%s: system state TLV "
+ "found (0x%04x), state 0x%08x\n",
+ tag, I2400M_TLV_SYSTEM_STATE,
+ le32_to_cpu(ss->state));
+ i2400m_report_tlv_system_state(i2400m, ss);
+ }
+ if (0 == i2400m_tlv_match(tlv, I2400M_TLV_RF_STATUS,
+ sizeof(*rfss))) {
+ rfss = container_of(tlv, typeof(*rfss), hdr);
+ d_printf(2, dev, "%s: RF status TLV "
+ "found (0x%04x), sw 0x%02x hw 0x%02x\n",
+ tag, I2400M_TLV_RF_STATUS,
+ le32_to_cpu(rfss->sw_rf_switch),
+ le32_to_cpu(rfss->hw_rf_switch));
+ i2400m_report_tlv_rf_switches_status(i2400m, rfss);
+ }
+ if (0 == i2400m_tlv_match(tlv, I2400M_TLV_MEDIA_STATUS,
+ sizeof(*ms))) {
+ ms = container_of(tlv, typeof(*ms), hdr);
+ d_printf(2, dev, "%s: Media Status TLV: %u\n",
+ tag, le32_to_cpu(ms->media_status));
+ i2400m_report_tlv_media_status(i2400m, ms);
+ }
+ }
+ d_fnend(4, dev, "(i2400m %p, l3l4_hdr %p, size %zu, %s) = void\n",
+ i2400m, l3l4_hdr, size, tag);
+}
+
+
+/*
+ * i2400m_report_hook - (maybe) act on a report
+ *
+ * @i2400m: device descriptor
+ * @l3l4_hdr: pointer to message; it has been already validated for
+ * consistent size.
+ * @size: size of the message (header + payload). The header length
+ * declaration is assumed to be congruent with @size (as in
+ * sizeof(*l3l4_hdr) + l3l4_hdr->length == size)
+ *
+ * Extract information we might need (like carrien on/off) from a
+ * device report.
+ */
+void i2400m_report_hook(struct i2400m *i2400m,
+ const struct i2400m_l3l4_hdr *l3l4_hdr, size_t size)
+{
+ struct device *dev = i2400m_dev(i2400m);
+ unsigned msg_type;
+
+ d_fnstart(3, dev, "(i2400m %p l3l4_hdr %p size %zu)\n",
+ i2400m, l3l4_hdr, size);
+ /* Chew on the message, we might need some information from
+ * here */
+ msg_type = le16_to_cpu(l3l4_hdr->type);
+ switch (msg_type) {
+ case I2400M_MT_REPORT_STATE: /* carrier detection... */
+ i2400m_report_state_hook(i2400m,
+ l3l4_hdr, size, "REPORT STATE");
+ break;
+ /* If the device is ready for power save, then ask it to do
+ * it. */
+ case I2400M_MT_REPORT_POWERSAVE_READY: /* zzzzz */
+ if (l3l4_hdr->status == cpu_to_le16(I2400M_MS_DONE_OK)) {
+ d_printf(1, dev, "ready for powersave, requesting\n");
+ i2400m_cmd_enter_powersave(i2400m);
+ }
+ break;
+ };
+ d_fnend(3, dev, "(i2400m %p l3l4_hdr %p size %zu) = void\n",
+ i2400m, l3l4_hdr, size);
+}
+
+
+/*
+ * i2400m_msg_ack_hook - process cmd/set/get ack for internal status
+ *
+ * @i2400m: device descriptor
+ * @l3l4_hdr: pointer to message; it has been already validated for
+ * consistent size.
+ * @size: size of the message
+ *
+ * Extract information we might need from acks to commands and act on
+ * it. This is akin to i2400m_report_hook(). Note most of this
+ * processing should be done in the function that calls the
+ * command. This is here for some cases where it can't happen...
+ */
+void i2400m_msg_ack_hook(struct i2400m *i2400m,
+ const struct i2400m_l3l4_hdr *l3l4_hdr, size_t size)
+{
+ int result;
+ struct device *dev = i2400m_dev(i2400m);
+ unsigned ack_type, ack_status;
+ char strerr[32];
+
+ /* Chew on the message, we might need some information from
+ * here */
+ ack_type = le16_to_cpu(l3l4_hdr->type);
+ ack_status = le16_to_cpu(l3l4_hdr->status);
+ switch (ack_type) {
+ case I2400M_MT_CMD_ENTER_POWERSAVE:
+ /* This is just left here for the sake of example, as
+ * the processing is done somewhere else. */
+ if (0) {
+ result = i2400m_msg_check_status(
+ l3l4_hdr, strerr, sizeof(strerr));
+ if (result >= 0)
+ d_printf(1, dev, "ready for power save: %zd\n",
+ size);
+ }
+ break;
+ };
+ return;
+}
+
+
+/*
+ * i2400m_msg_size_check() - verify message size and header are congruent
+ *
+ * It is ok if the total message size is larger than the expected
+ * size, as there can be padding.
+ */
+int i2400m_msg_size_check(struct i2400m *i2400m,
+ const struct i2400m_l3l4_hdr *l3l4_hdr,
+ size_t msg_size)
+{
+ int result;
+ struct device *dev = i2400m_dev(i2400m);
+ size_t expected_size;
+ d_fnstart(4, dev, "(i2400m %p l3l4_hdr %p msg_size %zu)\n",
+ i2400m, l3l4_hdr, msg_size);
+ if (msg_size < sizeof(*l3l4_hdr)) {
+ dev_err(dev, "bad size for message header "
+ "(expected at least %zu, got %zu)\n",
+ (size_t) sizeof(*l3l4_hdr), msg_size);
+ result = -EIO;
+ goto error_hdr_size;
+ }
+ expected_size = le16_to_cpu(l3l4_hdr->length) + sizeof(*l3l4_hdr);
+ if (msg_size < expected_size) {
+ dev_err(dev, "bad size for message code 0x%04x (expected %zu, "
+ "got %zu)\n", le16_to_cpu(l3l4_hdr->type),
+ expected_size, msg_size);
+ result = -EIO;
+ } else
+ result = 0;
+error_hdr_size:
+ d_fnend(4, dev,
+ "(i2400m %p l3l4_hdr %p msg_size %zu) = %d\n",
+ i2400m, l3l4_hdr, msg_size, result);
+ return result;
+}
+
+
+
+/*
+ * Cancel a wait for a command ACK
+ *
+ * @i2400m: device descriptor
+ * @code: [negative] errno code to cancel with (don't use
+ * -EINPROGRESS)
+ *
+ * If there is an ack already filled out, free it.
+ */
+void i2400m_msg_to_dev_cancel_wait(struct i2400m *i2400m, int code)
+{
+ struct sk_buff *ack_skb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&i2400m->rx_lock, flags);
+ ack_skb = i2400m->ack_skb;
+ if (ack_skb && !IS_ERR(ack_skb))
+ kfree(ack_skb);
+ i2400m->ack_skb = ERR_PTR(code);
+ spin_unlock_irqrestore(&i2400m->rx_lock, flags);
+}
+
+
+/**
+ * i2400m_msg_to_dev - Send a control message to the device and get a response
+ *
+ * @i2400m: device descriptor
+ *
+ * @msg_skb: an skb *
+ *
+ * @buf: pointer to the buffer containing the message to be sent; it
+ * has to start with a &struct i2400M_l3l4_hdr and then
+ * followed by the payload. Once this function returns, the
+ * buffer can be reused.
+ *
+ * @buf_len: buffer size
+ *
+ * Returns:
+ *
+ * Pointer to skb containing the ack message. You need to check the
+ * pointer with IS_ERR(), as it might be an error code. Error codes
+ * could happen because:
+ *
+ * - the message wasn't formatted correctly
+ * - couldn't send the message
+ * - failed waiting for a response
+ * - the ack message wasn't formatted correctly
+ *
+ * The returned skb has been allocated with wimax_msg_to_user_alloc(),
+ * it contains the reponse in a netlink attribute and is ready to be
+ * passed up to user space with wimax_msg_to_user_send(). To access
+ * the payload and its length, use wimax_pipe_msg_{data,len}() on the skb.
+ *
+ * The skb has to be freed with kfree_skb() once done.
+ *
+ * Description:
+ *
+ * This function delivers a message/command to the device and waits
+ * for an ack to be received. The format is described in
+ * linux/wimax/i2400m.h. In summary, a command/get/set is followed by an
+ * ack.
+ *
+ * This function will not check the ack status, that's left up to the
+ * caller. Once done with the ack skb, it has to be kfree_skb()ed.
+ *
+ * The i2400m handles only one message at the same time, thus we need
+ * the mutex to exclude other players.
+ *
+ * We write the message and then wait for an answer to come back. The
+ * RX path intercepts control messages and handles them in
+ * i2400m_rx_ctl(). Reports (notifications) are (maybe) processed
+ * locally and then forwarded (as needed) to user space on the WiMAX
+ * stack message pipe. Acks are saved and passed back to us through an
+ * skb in i2400m->ack_skb which is ready to be given to generic
+ * netlink if need be.
+ */
+struct sk_buff *i2400m_msg_to_dev(struct i2400m *i2400m,
+ const void *buf, size_t buf_len)
+{
+ int result;
+ struct device *dev = i2400m_dev(i2400m);
+ const struct i2400m_l3l4_hdr *msg_l3l4_hdr;
+ struct sk_buff *ack_skb;
+ const struct i2400m_l3l4_hdr *ack_l3l4_hdr;
+ size_t ack_len;
+ int ack_timeout;
+ unsigned msg_type;
+ unsigned long flags;
+
+ d_fnstart(3, dev, "(i2400m %p buf %p len %zu)\n",
+ i2400m, buf, buf_len);
+
+ if (i2400m->boot_mode)
+ return ERR_PTR(-ENODEV);
+
+ msg_l3l4_hdr = buf;
+ /* Check msg & payload consistency */
+ result = i2400m_msg_size_check(i2400m, msg_l3l4_hdr, buf_len);
+ if (result < 0)
+ goto error_bad_msg;
+ msg_type = le16_to_cpu(msg_l3l4_hdr->type);
+ d_printf(1, dev, "CMD/GET/SET 0x%04x %zu bytes\n",
+ msg_type, buf_len);
+ d_dump(2, dev, buf, buf_len);
+
+ /* Setup the completion, ack_skb ("we are waiting") and send
+ * the message to the device */
+ mutex_lock(&i2400m->msg_mutex);
+ spin_lock_irqsave(&i2400m->rx_lock, flags);
+ i2400m->ack_skb = ERR_PTR(-EINPROGRESS);
+ spin_unlock_irqrestore(&i2400m->rx_lock, flags);
+ init_completion(&i2400m->msg_completion);
+ result = i2400m_tx(i2400m, buf, buf_len, I2400M_PT_CTRL);
+ if (result < 0) {
+ dev_err(dev, "can't send message 0x%04x: %d\n",
+ le16_to_cpu(msg_l3l4_hdr->type), result);
+ goto error_tx;
+ }
+
+ /* Some commands take longer to execute because of crypto ops,
+ * so we give them some more leeway on timeout */
+ switch (msg_type) {
+ case I2400M_MT_GET_TLS_OPERATION_RESULT:
+ case I2400M_MT_CMD_SEND_EAP_RESPONSE:
+ ack_timeout = 5 * HZ;
+ break;
+ default:
+ ack_timeout = HZ;
+ };
+
+ /* The RX path in rx.c will put any response for this message
+ * in i2400m->ack_skb and wake us up. If we cancel the wait,
+ * we need to change the value of i2400m->ack_skb to something
+ * not -EINPROGRESS so RX knows there is no one waiting. */
+ result = wait_for_completion_interruptible_timeout(
+ &i2400m->msg_completion, ack_timeout);
+ if (result == 0) {
+ dev_err(dev, "timeout waiting for reply to message 0x%04x\n",
+ msg_type);
+ result = -ETIMEDOUT;
+ i2400m_msg_to_dev_cancel_wait(i2400m, result);
+ goto error_wait_for_completion;
+ } else if (result < 0) {
+ dev_err(dev, "error waiting for reply to message 0x%04x: %d\n",
+ msg_type, result);
+ i2400m_msg_to_dev_cancel_wait(i2400m, result);
+ goto error_wait_for_completion;
+ }
+
+ /* Pull out the ack data from i2400m->ack_skb -- see if it is
+ * an error and act accordingly */
+ spin_lock_irqsave(&i2400m->rx_lock, flags);
+ ack_skb = i2400m->ack_skb;
+ if (IS_ERR(ack_skb))
+ result = PTR_ERR(ack_skb);
+ else
+ result = 0;
+ i2400m->ack_skb = NULL;
+ spin_unlock_irqrestore(&i2400m->rx_lock, flags);
+ if (result < 0)
+ goto error_ack_status;
+ ack_l3l4_hdr = wimax_msg_data(ack_skb);
+ ack_len = wimax_msg_len(ack_skb);
+
+ /* Check the ack and deliver it if it is ok */
+ result = i2400m_msg_size_check(i2400m, ack_l3l4_hdr, ack_len);
+ if (result < 0) {
+ dev_err(dev, "HW BUG? reply to message 0x%04x: %d\n",
+ msg_type, result);
+ goto error_bad_ack_len;
+ }
+ if (msg_type != le16_to_cpu(ack_l3l4_hdr->type)) {
+ dev_err(dev, "HW BUG? bad reply 0x%04x to message 0x%04x\n",
+ le16_to_cpu(ack_l3l4_hdr->type), msg_type);
+ result = -EIO;
+ goto error_bad_ack_type;
+ }
+ i2400m_msg_ack_hook(i2400m, ack_l3l4_hdr, ack_len);
+ mutex_unlock(&i2400m->msg_mutex);
+ d_fnend(3, dev, "(i2400m %p buf %p len %zu) = %p\n",
+ i2400m, buf, buf_len, ack_skb);
+ return ack_skb;
+
+error_bad_ack_type:
+error_bad_ack_len:
+ kfree_skb(ack_skb);
+error_ack_status:
+error_wait_for_completion:
+error_tx:
+ mutex_unlock(&i2400m->msg_mutex);
+error_bad_msg:
+ d_fnend(3, dev, "(i2400m %p buf %p len %zu) = %d\n",
+ i2400m, buf, buf_len, result);
+ return ERR_PTR(result);
+}
+
+
+/*
+ * Definitions for the Enter Power Save command
+ *
+ * The Enter Power Save command requests the device to go into power
+ * saving mode. The device will ack or nak the command depending on it
+ * being ready for it. If it acks, we tell the USB subsystem to
+ *
+ * As well, the device might request to go into power saving mode by
+ * sending a report (REPORT_POWERSAVE_READY), in which case, we issue
+ * this command. The hookups in the RX coder allow
+ */
+enum {
+ I2400M_WAKEUP_ENABLED = 0x01,
+ I2400M_WAKEUP_DISABLED = 0x02,
+ I2400M_TLV_TYPE_WAKEUP_MODE = 144,
+};
+
+struct i2400m_cmd_enter_power_save {
+ struct i2400m_l3l4_hdr hdr;
+ struct i2400m_tlv_hdr tlv;
+ __le32 val;
+} __attribute__((packed));
+
+
+/*
+ * Request entering power save
+ *
+ * This command is (mainly) executed when the device indicates that it
+ * is ready to go into powersave mode via a REPORT_POWERSAVE_READY.
+ */
+int i2400m_cmd_enter_powersave(struct i2400m *i2400m)
+{
+ int result;
+ struct device *dev = i2400m_dev(i2400m);
+ struct sk_buff *ack_skb;
+ struct i2400m_cmd_enter_power_save *cmd;
+ char strerr[32];
+
+ result = -ENOMEM;
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ goto error_alloc;
+ cmd->hdr.type = cpu_to_le16(I2400M_MT_CMD_ENTER_POWERSAVE);
+ cmd->hdr.length = cpu_to_le16(sizeof(*cmd) - sizeof(cmd->hdr));
+ cmd->hdr.version = cpu_to_le16(I2400M_L3L4_VERSION);
+ cmd->tlv.type = cpu_to_le16(I2400M_TLV_TYPE_WAKEUP_MODE);
+ cmd->tlv.length = cpu_to_le16(sizeof(cmd->val));
+ cmd->val = cpu_to_le32(I2400M_WAKEUP_ENABLED);
+
+ ack_skb = i2400m_msg_to_dev(i2400m, cmd, sizeof(*cmd));
+ result = PTR_ERR(ack_skb);
+ if (IS_ERR(ack_skb)) {
+ dev_err(dev, "Failed to issue 'Enter power save' command: %d\n",
+ result);
+ goto error_msg_to_dev;
+ }
+ result = i2400m_msg_check_status(wimax_msg_data(ack_skb),
+ strerr, sizeof(strerr));
+ if (result == -EACCES)
+ d_printf(1, dev, "Cannot enter power save mode\n");
+ else if (result < 0)
+ dev_err(dev, "'Enter power save' (0x%04x) command failed: "
+ "%d - %s\n", I2400M_MT_CMD_ENTER_POWERSAVE,
+ result, strerr);
+ else
+ d_printf(1, dev, "device ready to power save\n");
+ kfree_skb(ack_skb);
+error_msg_to_dev:
+ kfree(cmd);
+error_alloc:
+ return result;
+}
+EXPORT_SYMBOL_GPL(i2400m_cmd_enter_powersave);
+
+
+/*
+ * Definitions for getting device information
+ */
+enum {
+ I2400M_TLV_DETAILED_DEVICE_INFO = 140
+};
+
+/**
+ * i2400m_get_device_info - Query the device for detailed device information
+ *
+ * @i2400m: device descriptor
+ *
+ * Returns: an skb whose skb->data points to a 'struct
+ * i2400m_tlv_detailed_device_info'. When done, kfree_skb() it. The
+ * skb is *guaranteed* to contain the whole TLV data structure.
+ *
+ * On error, IS_ERR(skb) is true and ERR_PTR(skb) is the error
+ * code.
+ */
+struct sk_buff *i2400m_get_device_info(struct i2400m *i2400m)
+{
+ int result;
+ struct device *dev = i2400m_dev(i2400m);
+ struct sk_buff *ack_skb;
+ struct i2400m_l3l4_hdr *cmd;
+ const struct i2400m_l3l4_hdr *ack;
+ size_t ack_len;
+ const struct i2400m_tlv_hdr *tlv;
+ const struct i2400m_tlv_detailed_device_info *ddi;
+ char strerr[32];
+
+ ack_skb = ERR_PTR(-ENOMEM);
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ goto error_alloc;
+ cmd->type = cpu_to_le16(I2400M_MT_GET_DEVICE_INFO);
+ cmd->length = 0;
+ cmd->version = cpu_to_le16(I2400M_L3L4_VERSION);
+
+ ack_skb = i2400m_msg_to_dev(i2400m, cmd, sizeof(*cmd));
+ if (IS_ERR(ack_skb)) {
+ dev_err(dev, "Failed to issue 'get device info' command: %ld\n",
+ PTR_ERR(ack_skb));
+ goto error_msg_to_dev;
+ }
+ ack = wimax_msg_data(ack_skb);
+ ack_len = wimax_msg_len(ack_skb);
+ result = i2400m_msg_check_status(ack, strerr, sizeof(strerr));
+ if (result < 0) {
+ dev_err(dev, "'get device info' (0x%04x) command failed: "
+ "%d - %s\n", I2400M_MT_GET_DEVICE_INFO, result,
+ strerr);
+ goto error_cmd_failed;
+ }
+ tlv = i2400m_tlv_find(i2400m, ack->pl, ack_len - sizeof(*ack),
+ I2400M_TLV_DETAILED_DEVICE_INFO, sizeof(*ddi));
+ if (tlv == NULL) {
+ dev_err(dev, "GET DEVICE INFO: "
+ "detailed device info TLV not found (0x%04x)\n",
+ I2400M_TLV_DETAILED_DEVICE_INFO);
+ result = -EIO;
+ goto error_no_tlv;
+ }
+ skb_pull(ack_skb, (void *) tlv - (void *) ack_skb->data);
+error_msg_to_dev:
+ kfree(cmd);
+error_alloc:
+ return ack_skb;
+
+error_no_tlv:
+error_cmd_failed:
+ kfree_skb(ack_skb);
+ kfree(cmd);
+ return ERR_PTR(result);
+}
+
+
+/* Firmware interface versions we support */
+enum {
+ I2400M_HDIv_MAJOR = 9,
+ I2400M_HDIv_MAJOR_2 = 8,
+ I2400M_HDIv_MINOR = 1,
+};
+
+
+/**
+ * i2400m_firmware_check - check firmware versions are compatible with
+ * the driver
+ *
+ * @i2400m: device descriptor
+ *
+ * Returns: 0 if ok, < 0 errno code an error and a message in the
+ * kernel log.
+ *
+ * Long function, but quite simple; first chunk launches the command
+ * and double checks the reply for the right TLV. Then we process the
+ * TLV (where the meat is).
+ */
+int i2400m_firmware_check(struct i2400m *i2400m)
+{
+ int result;
+ struct device *dev = i2400m_dev(i2400m);
+ struct sk_buff *ack_skb;
+ struct i2400m_l3l4_hdr *cmd;
+ const struct i2400m_l3l4_hdr *ack;
+ size_t ack_len;
+ const struct i2400m_tlv_hdr *tlv;
+ const struct i2400m_tlv_l4_message_versions *l4mv;
+ char strerr[32];
+ unsigned major, minor, branch;
+
+ result = -ENOMEM;
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ goto error_alloc;
+ cmd->type = cpu_to_le16(I2400M_MT_GET_LM_VERSION);
+ cmd->length = 0;
+ cmd->version = cpu_to_le16(I2400M_L3L4_VERSION);
+
+ ack_skb = i2400m_msg_to_dev(i2400m, cmd, sizeof(*cmd));
+ if (IS_ERR(ack_skb)) {
+ result = PTR_ERR(ack_skb);
+ dev_err(dev, "Failed to issue 'get lm version' command: %-d\n",
+ result);
+ goto error_msg_to_dev;
+ }
+ ack = wimax_msg_data(ack_skb);
+ ack_len = wimax_msg_len(ack_skb);
+ result = i2400m_msg_check_status(ack, strerr, sizeof(strerr));
+ if (result < 0) {
+ dev_err(dev, "'get lm version' (0x%04x) command failed: "
+ "%d - %s\n", I2400M_MT_GET_LM_VERSION, result,
+ strerr);
+ goto error_cmd_failed;
+ }
+ tlv = i2400m_tlv_find(i2400m, ack->pl, ack_len - sizeof(*ack),
+ I2400M_TLV_L4_MESSAGE_VERSIONS, sizeof(*l4mv));
+ if (tlv == NULL) {
+ dev_err(dev, "get lm version: TLV not found (0x%04x)\n",
+ I2400M_TLV_L4_MESSAGE_VERSIONS);
+ result = -EIO;
+ goto error_no_tlv;
+ }
+ l4mv = container_of(tlv, typeof(*l4mv), hdr);
+ major = le16_to_cpu(l4mv->major);
+ minor = le16_to_cpu(l4mv->minor);
+ branch = le16_to_cpu(l4mv->branch);
+ result = -EINVAL;
+ if (major != I2400M_HDIv_MAJOR
+ && major != I2400M_HDIv_MAJOR_2) {
+ dev_err(dev, "unsupported major fw interface version "
+ "%u.%u.%u\n", major, minor, branch);
+ goto error_bad_major;
+ }
+ if (major == I2400M_HDIv_MAJOR_2)
+ dev_err(dev, "deprecated major fw interface version "
+ "%u.%u.%u\n", major, minor, branch);
+ result = 0;
+ if (minor != I2400M_HDIv_MINOR)
+ dev_warn(dev, "untested minor fw firmware version %u.%u.%u\n",
+ major, minor, branch);
+error_bad_major:
+ dev_info(dev, "firmware interface version %u.%u.%u\n",
+ major, minor, branch);
+error_no_tlv:
+error_cmd_failed:
+ kfree_skb(ack_skb);
+error_msg_to_dev:
+ kfree(cmd);
+error_alloc:
+ return result;
+}
+
+
+/*
+ * Send an DoExitIdle command to the device to ask it to go out of
+ * basestation-idle mode.
+ *
+ * @i2400m: device descriptor
+ *
+ * This starts a renegotiation with the basestation that might involve
+ * another crypto handshake with user space.
+ *
+ * Returns: 0 if ok, < 0 errno code on error.
+ */
+int i2400m_cmd_exit_idle(struct i2400m *i2400m)
+{
+ int result;
+ struct device *dev = i2400m_dev(i2400m);
+ struct sk_buff *ack_skb;
+ struct i2400m_l3l4_hdr *cmd;
+ char strerr[32];
+
+ result = -ENOMEM;
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ goto error_alloc;
+ cmd->type = cpu_to_le16(I2400M_MT_CMD_EXIT_IDLE);
+ cmd->length = 0;
+ cmd->version = cpu_to_le16(I2400M_L3L4_VERSION);
+
+ ack_skb = i2400m_msg_to_dev(i2400m, cmd, sizeof(*cmd));
+ result = PTR_ERR(ack_skb);
+ if (IS_ERR(ack_skb)) {
+ dev_err(dev, "Failed to issue 'exit idle' command: %d\n",
+ result);
+ goto error_msg_to_dev;
+ }
+ result = i2400m_msg_check_status(wimax_msg_data(ack_skb),
+ strerr, sizeof(strerr));
+ kfree_skb(ack_skb);
+error_msg_to_dev:
+ kfree(cmd);
+error_alloc:
+ return result;
+
+}
+
+
+/*
+ * Query the device for its state, update the WiMAX stack's idea of it
+ *
+ * @i2400m: device descriptor
+ *
+ * Returns: 0 if ok, < 0 errno code on error.
+ *
+ * Executes a 'Get State' command and parses the returned
+ * TLVs.
+ *
+ * Because this is almost identical to a 'Report State', we use
+ * i2400m_report_state_hook() to parse the answer. This will set the
+ * carrier state, as well as the RF Kill switches state.
+ */
+int i2400m_cmd_get_state(struct i2400m *i2400m)
+{
+ int result;
+ struct device *dev = i2400m_dev(i2400m);
+ struct sk_buff *ack_skb;
+ struct i2400m_l3l4_hdr *cmd;
+ const struct i2400m_l3l4_hdr *ack;
+ size_t ack_len;
+ char strerr[32];
+
+ result = -ENOMEM;
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ goto error_alloc;
+ cmd->type = cpu_to_le16(I2400M_MT_GET_STATE);
+ cmd->length = 0;
+ cmd->version = cpu_to_le16(I2400M_L3L4_VERSION);
+
+ ack_skb = i2400m_msg_to_dev(i2400m, cmd, sizeof(*cmd));
+ if (IS_ERR(ack_skb)) {
+ dev_err(dev, "Failed to issue 'get state' command: %ld\n",
+ PTR_ERR(ack_skb));
+ result = PTR_ERR(ack_skb);
+ goto error_msg_to_dev;
+ }
+ ack = wimax_msg_data(ack_skb);
+ ack_len = wimax_msg_len(ack_skb);
+ result = i2400m_msg_check_status(ack, strerr, sizeof(strerr));
+ if (result < 0) {
+ dev_err(dev, "'get state' (0x%04x) command failed: "
+ "%d - %s\n", I2400M_MT_GET_STATE, result, strerr);
+ goto error_cmd_failed;
+ }
+ i2400m_report_state_hook(i2400m, ack, ack_len - sizeof(*ack),
+ "GET STATE");
+ result = 0;
+ kfree_skb(ack_skb);
+error_cmd_failed:
+error_msg_to_dev:
+ kfree(cmd);
+error_alloc:
+ return result;
+}
+EXPORT_SYMBOL_GPL(i2400m_cmd_get_state);
+
+
+/**
+ * Set basic configuration settings
+ *
+ * @i2400m: device descriptor
+ * @args: array of pointers to the TLV headers to send for
+ * configuration (each followed by its payload).
+ * TLV headers and payloads must be properly initialized, with the
+ * right endianess (LE).
+ * @arg_size: number of pointers in the @args array
+ */
+int i2400m_set_init_config(struct i2400m *i2400m,
+ const struct i2400m_tlv_hdr **arg, size_t args)
+{
+ int result;
+ struct device *dev = i2400m_dev(i2400m);
+ struct sk_buff *ack_skb;
+ struct i2400m_l3l4_hdr *cmd;
+ char strerr[32];
+ unsigned argc, argsize, tlv_size;
+ const struct i2400m_tlv_hdr *tlv_hdr;
+ void *buf, *itr;
+
+ d_fnstart(3, dev, "(i2400m %p arg %p args %zu)\n", i2400m, arg, args);
+ result = 0;
+ if (args == 0)
+ goto none;
+ /* Compute the size of all the TLVs, so we can alloc a
+ * contiguous command block to copy them. */
+ argsize = 0;
+ for (argc = 0; argc < args; argc++) {
+ tlv_hdr = arg[argc];
+ argsize += sizeof(*tlv_hdr) + le16_to_cpu(tlv_hdr->length);
+ }
+ WARN_ON(argc >= 9); /* As per hw spec */
+
+ /* Alloc the space for the command and TLVs*/
+ result = -ENOMEM;
+ buf = kzalloc(sizeof(*cmd) + argsize, GFP_KERNEL);
+ if (buf == NULL)
+ goto error_alloc;
+ cmd = buf;
+ cmd->type = cpu_to_le16(I2400M_MT_SET_INIT_CONFIG);
+ cmd->length = cpu_to_le16(argsize);
+ cmd->version = cpu_to_le16(I2400M_L3L4_VERSION);
+
+ /* Copy the TLVs */
+ itr = buf + sizeof(*cmd);
+ for (argc = 0; argc < args; argc++) {
+ tlv_hdr = arg[argc];
+ tlv_size = sizeof(*tlv_hdr) + le16_to_cpu(tlv_hdr->length);
+ memcpy(itr, tlv_hdr, tlv_size);
+ itr += tlv_size;
+ }
+
+ /* Send the message! */
+ ack_skb = i2400m_msg_to_dev(i2400m, buf, sizeof(*cmd) + argsize);
+ result = PTR_ERR(ack_skb);
+ if (IS_ERR(ack_skb)) {
+ dev_err(dev, "Failed to issue 'init config' command: %d\n",
+ result);
+
+ goto error_msg_to_dev;
+ }
+ result = i2400m_msg_check_status(wimax_msg_data(ack_skb),
+ strerr, sizeof(strerr));
+ if (result < 0)
+ dev_err(dev, "'init config' (0x%04x) command failed: %d - %s\n",
+ I2400M_MT_SET_INIT_CONFIG, result, strerr);
+ kfree_skb(ack_skb);
+error_msg_to_dev:
+ kfree(buf);
+error_alloc:
+none:
+ d_fnend(3, dev, "(i2400m %p arg %p args %zu) = %d\n",
+ i2400m, arg, args, result);
+ return result;
+
+}
+EXPORT_SYMBOL_GPL(i2400m_set_init_config);
+
+
+/**
+ * i2400m_dev_initialize - Initialize the device once communications are ready
+ *
+ * @i2400m: device descriptor
+ *
+ * Returns: 0 if ok, < 0 errno code on error.
+ *
+ * Configures the device to work the way we like it.
+ *
+ * At the point of this call, the device is registered with the WiMAX
+ * and netdev stacks, firmware is uploaded and we can talk to the
+ * device normally.
+ */
+int i2400m_dev_initialize(struct i2400m *i2400m)
+{
+ int result;
+ struct device *dev = i2400m_dev(i2400m);
+ struct i2400m_tlv_config_idle_parameters idle_params;
+ const struct i2400m_tlv_hdr *args[9];
+ unsigned argc = 0;
+
+ d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+ /* Useless for now...might change */
+ if (i2400m_idle_mode_disabled) {
+ idle_params.hdr.type =
+ cpu_to_le16(I2400M_TLV_CONFIG_IDLE_PARAMETERS);
+ idle_params.hdr.length = cpu_to_le16(
+ sizeof(idle_params) - sizeof(idle_params.hdr));
+ idle_params.idle_timeout = 0;
+ idle_params.idle_paging_interval = 0;
+ args[argc++] = &idle_params.hdr;
+ }
+ result = i2400m_set_init_config(i2400m, args, argc);
+ if (result < 0)
+ goto error;
+ result = i2400m_firmware_check(i2400m); /* fw versions ok? */
+ if (result < 0)
+ goto error;
+ /*
+ * Update state: Here it just calls a get state; parsing the
+ * result (System State TLV and RF Status TLV [done in the rx
+ * path hooks]) will set the hardware and software RF-Kill
+ * status.
+ */
+ result = i2400m_cmd_get_state(i2400m);
+error:
+ d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
+ return result;
+}
+
+
+/**
+ * i2400m_dev_shutdown - Shutdown a running device
+ *
+ * @i2400m: device descriptor
+ *
+ * Gracefully stops the device, moving it to the lowest power
+ * consumption state possible.
+ */
+void i2400m_dev_shutdown(struct i2400m *i2400m)
+{
+ int result = -ENODEV;
+ struct device *dev = i2400m_dev(i2400m);
+
+ d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+ result = i2400m->bus_reset(i2400m, I2400M_RT_WARM);
+ d_fnend(3, dev, "(i2400m %p) = void [%d]\n", i2400m, result);
+ return;
+}
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists