[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <m3myeqba4b.fsf@maximus.localdomain>
Date: Sun, 21 Dec 2008 02:16:52 +0100
From: Krzysztof Halasa <khc@...waw.pl>
To: <netdev@...r.kernel.org>
Subject: Re: [RFC] IXP4xx: Add ethtool support to Ethernet driver.
Few patches I'm posting for review only.
Not for operational use.
IXP4xx: Add ethtool support to Ethernet driver.
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -170,6 +170,7 @@ struct port {
u32 desc_tab_phys;
int id; /* logical port ID */
int speed, duplex;
+ u8 firmware[4];
};
/* NPE message structure */
@@ -796,6 +797,45 @@ static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
return phy_mii_ioctl(port->phydev, if_mii(req), cmd);
}
+/* ethtool support */
+
+static void ixp4xx_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct port *port = netdev_priv(dev);
+ strcpy(info->driver, DRV_NAME);
+ snprintf(info->fw_version, sizeof(info->fw_version), "%u:%u:%u:%u",
+ port->firmware[0], port->firmware[1],
+ port->firmware[2], port->firmware[3]);
+ strcpy(info->bus_info, "internal");
+}
+
+static int ixp4xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct port *port = netdev_priv(dev);
+ return phy_ethtool_gset(port->phydev, cmd);
+}
+
+static int ixp4xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct port *port = netdev_priv(dev);
+ return phy_ethtool_sset(port->phydev, cmd);
+}
+
+static int ixp4xx_nway_reset(struct net_device *dev)
+{
+ struct port *port = netdev_priv(dev);
+ return phy_start_aneg(port->phydev);
+}
+
+static struct ethtool_ops ixp4xx_ethtool_ops = {
+ .get_drvinfo = ixp4xx_get_drvinfo,
+ .get_settings = ixp4xx_get_settings,
+ .set_settings = ixp4xx_set_settings,
+ .nway_reset = ixp4xx_nway_reset,
+ .get_link = ethtool_op_get_link,
+};
+
static int request_queues(struct port *port)
{
@@ -943,6 +983,10 @@ static int eth_open(struct net_device *dev)
npe_name(npe));
return -EIO;
}
+ port->firmware[0] = msg.byte4;
+ port->firmware[1] = msg.byte5;
+ port->firmware[2] = msg.byte6;
+ port->firmware[3] = msg.byte7;
}
memset(&msg, 0, sizeof(msg));
@@ -1152,6 +1196,7 @@ static int __devinit eth_init_one(struct platform_device *pdev)
dev->hard_start_xmit = eth_xmit;
dev->stop = eth_close;
dev->do_ioctl = eth_ioctl;
+ dev->ethtool_ops = &ixp4xx_ethtool_ops;
dev->set_multicast_list = eth_set_mcast_list;
dev->tx_queue_len = 100;
--
Krzysztof Halasa
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists