[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <494F655B.1070405@mellanox.co.il>
Date: Mon, 22 Dec 2008 12:00:59 +0200
From: Yevgeny Petrilin <yevgenyp@...lanox.co.il>
To: jeff@...zik.org
CC: rdreier@...co.com, netdev@...r.kernel.org,
general@...ts.openfabrics.org
Subject: [PATCH 5/9] mlx4_en: Removed Interrupt moderation module parameters
They are controlled through Ethtool interface, no need to have two
ways to modify them.
Signed-off-by: Yevgeny Petrilin <yevgenyp@...lanox.co.il>
---
drivers/net/mlx4/en_netdev.c | 14 +++-----------
drivers/net/mlx4/en_params.c | 10 ----------
drivers/net/mlx4/mlx4_en.h | 3 ---
3 files changed, 3 insertions(+), 24 deletions(-)
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 96e709d..8b5e8f0 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -369,7 +369,6 @@ static struct net_device_stats *mlx4_en_get_stats(struct net_device *dev)
static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
{
- struct mlx4_en_dev *mdev = priv->mdev;
struct mlx4_en_cq *cq;
int i;
@@ -379,15 +378,8 @@ static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
* satisfy our coelsing target.
* - moder_time is set to a fixed value.
*/
- priv->rx_frames = (mdev->profile.rx_moder_cnt ==
- MLX4_EN_AUTO_CONF) ?
- MLX4_EN_RX_COAL_TARGET /
- priv->dev->mtu + 1 :
- mdev->profile.rx_moder_cnt;
- priv->rx_usecs = (mdev->profile.rx_moder_time ==
- MLX4_EN_AUTO_CONF) ?
- MLX4_EN_RX_COAL_TIME :
- mdev->profile.rx_moder_time;
+ priv->rx_frames = MLX4_EN_RX_COAL_TARGET / priv->dev->mtu + 1;
+ priv->rx_usecs = MLX4_EN_RX_COAL_TIME;
mlx4_dbg(INTR, priv, "Default coalesing params for mtu:%d - "
"rx_frames:%d rx_usecs:%d\n",
priv->dev->mtu, priv->rx_frames, priv->rx_usecs);
@@ -411,7 +403,7 @@ static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
priv->pkt_rate_high = MLX4_EN_RX_RATE_HIGH;
priv->rx_usecs_high = MLX4_EN_RX_COAL_TIME_HIGH;
priv->sample_interval = MLX4_EN_SAMPLE_INTERVAL;
- priv->adaptive_rx_coal = mdev->profile.auto_moder;
+ priv->adaptive_rx_coal = 1;
priv->last_moder_time = MLX4_EN_AUTO_CONF;
priv->last_moder_jiffies = 0;
priv->last_moder_packets = 0;
diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c
index 95706ee..86f4031 100644
--- a/drivers/net/mlx4/en_params.c
+++ b/drivers/net/mlx4/en_params.c
@@ -71,13 +71,6 @@ MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]."
" Per priority bit mask");
-/* Interrupt moderation tunning */
-MLX4_EN_PARM_INT(rx_moder_cnt, MLX4_EN_AUTO_CONF,
- "Max coalesced descriptors for Rx interrupt moderation");
-MLX4_EN_PARM_INT(rx_moder_time, MLX4_EN_AUTO_CONF,
- "Timeout following last packet for Rx interrupt moderation");
-MLX4_EN_PARM_INT(auto_moder, 1, "Enable dynamic interrupt moderation");
-
MLX4_EN_PARM_INT(rx_ring_num1, 0, "Number or Rx rings for port 1 (0 = #cores)");
MLX4_EN_PARM_INT(rx_ring_num2, 0, "Number or Rx rings for port 2 (0 = #cores)");
@@ -92,9 +85,6 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
struct mlx4_en_profile *params = &mdev->profile;
int i;
- params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF);
- params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF);
- params->auto_moder = auto_moder;
params->rss_xor = (rss_xor != 0);
params->rss_mask = rss_mask & 0x1f;
params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS);
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index 45b975f..63c42e4 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -333,9 +333,6 @@ struct mlx4_en_profile {
u8 rss_mask;
u32 active_ports;
u32 small_pkt_int;
- int rx_moder_cnt;
- int rx_moder_time;
- int auto_moder;
u8 no_reset;
struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1];
};
--
1.5.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists